1 / 35

PIEZOELECTRIC ULTRASONIC MOTOR BY

PIEZOELECTRIC ULTRASONIC MOTOR BY NEENA SKARIA Edited By Sarath S Nair www.technologyfuturae.com. CONTENTS. Need for USM

evangelia-chloe
Télécharger la présentation

PIEZOELECTRIC ULTRASONIC MOTOR BY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PIEZOELECTRIC ULTRASONIC MOTOR BY NEENA SKARIA Edited By Sarath S Nair www.technologyfuturae.com www.technologyfuturae.com

  2. CONTENTS • Need for USM • Principle of operation • Working of USM • Travelling wave USM • Equivalent circuit of USM • Speed characteristics of USM • Comparison with electromagnetic motor • Conclusion • Reference www.technologyfuturae.com

  3. NEED FOR USM • For applications such as industrial, medical, robotic, space, automotive etc market research indicates that tiny motors smaller than 1 cm3 is of great demand. • Electromagnetic motors smaller than 1 cm3 are difficult to produce with sufficient energy efficiency. • With smaller parts, an increasing percentage of power is converted into heat instead of motion. • A new class of motors using high power ultrasonic energy—ultrasonic motors—is gaining widespread attention www.technologyfuturae.com

  4. Ultrasonic motor • USM is newly developed motor that uses ultrasonic vibration of a piezoelectric material as its drive source. • The working frequency of ultrasonic motor ranges from 20Khz to 10Mhz (quiet in operation ). • The torque of an USM is 10 to 100 times larger than electromagnetic motors of the same size or weight • USM are emerging as an alternative to electromagnetic motors where miniaturization, low power use, and high reliability are required. www.technologyfuturae.com

  5. converse PIEZOELECTRIC EFFECT • Basic principle of operation –converse piezoelectric effect • the production of stress / strain when an electric field is applied to a piezoelectric material. www.technologyfuturae.com

  6. Effect of polarisation www.technologyfuturae.com

  7. If a voltage of the same polarity as the poling voltage is applied to a ceramic element, in the direction of the poling voltage, the element will lengthen and its diameter will become smaller. • If a voltage of polarity opposite that of the poling voltage is applied, the element will become shorter and broader. • If an alternating voltage is applied, the element will lengthen and shorten cyclically, at the frequency of the applied voltage www.technologyfuturae.com

  8. OPERATION OF USM www.technologyfuturae.com

  9. In the operation of the USMs two-stage energy conversion is formed. 1)Electromechanical energy conversion electrical energy is converted into mechanical energy by excitation of the piezoelectric ceramic with ultrasonic range frequency. 2)mechanical energy conversion mechanical vibrations are converted to linear or rotary motion by friction force generated in stator–rotor interface. www.technologyfuturae.com

  10. CLASSIFICATION There are various categories to classify ultrasonic motors such as (1) Operation: Rotary type and linear type (2) Device geometry: Rod type, π-shaped, ring and cylinder types (3) Generating wave: Standing wave type and travelling wave type. www.technologyfuturae.com

  11. TRAVELLING WAVE USM • Direction of USM opposite to direction of travelling wave www.technologyfuturae.com

  12. The ellipse of movement allows us to calculate speed of rotor • The velocity in the highest point of ellipse determines the speed of contact between stator and rotor which is the speed of the rotor itself www.technologyfuturae.com

  13. GENERATION OF TRAVELLING WAVE Standing wave is expressed as u s (x, t) = A cos kx . cos ωt Travelling wave is expressed as u t (x, t) = A cos ( kx – ωt) Using a trigonometric relation, u t (x, t) can be transformed as ut (x, t) = A cos kx . cos ωt + A cos ( kx – π/2) cos ( ωt -π/2) • Travelling wave can be generated by superimposing two standing waves whose phases differ by 90 degree from each other both in time and in space www.technologyfuturae.com

  14. ELECTRODE ARRANGEMENT www.technologyfuturae.com

  15. To generate a travelling-wave within the stator, it is necessary to have control of 2 mechanical orthogonal modes. • Electrode pattern A provides cos(kθ)and pattern B provides sin(kθ). By driving these 2 modes 90 degree out of phase temporally a travelling-wave is produced. • Patterns A and B provide a standing wave individually. The superposition of standing waves produces a travelling-wave • By changing the sign of one of the drives signals the direction of the travelling-wave and the direction of the rotor changes. www.technologyfuturae.com

  16. Relation b/w feedback electrodeand speed • Feedback electrode produces high frequency AC voltage when mechanical vibrations act on the stator surface which is proportional to motor speed. www.technologyfuturae.com

  17. USR 60 (TRAVELLING WAVE USM) • USR 60 is rotary travelling wave USM nameplate of USR60 USM • Drive frequency 40-44 kHz • Drive voltage 100-130 Vrms • Drive current 53mA • Rated torque 0.4 Nm • Rated power 4 W • Rated speed 10 rad/s • Weight 0.23 kg www.technologyfuturae.com

  18. ESTIMATION OF MOTOR CHARACTERISTICS Three methods have proposed to estimate motor characteristics. 1)Finite element method-----( where no electrical parameters are considered). 2)Energy conversion method------ (which is too complicated to estimate motor characteristics under different driving frequencies). 3) Equivalent circuit model (ECM) If there is a sufficiently applicable equivalent circuit model (ECM) for expression of practical operations of the USMs, it will be very useful for the design and the estimation of motor characteristics. www.technologyfuturae.com

  19. EQUIVALENT CIRCUIT Where, F=AV-Zv I=YdV+Av Yd=1/jwCd A = force factor F = force at mechanical terminal v = velocity at the mechanical terminal Z= the mechanical impedance of piezoelectric ceramic www.technologyfuturae.com

  20. Equivalent circuit of USM • Cd=damping capacitance • Lm=motional inductance=m/A 2 • Cm=motional capacitance=A 2/s • ro= Internal resistor=r/A 2 www.technologyfuturae.com

  21. Where s =spring constant of stator, m= mass of metal assembly and ceramic of stator, A =force factor r = mechanical resistance • USM should be driven at frequency creating resonance between Cm and Lm in the equivalent circuit. • The mechanical resonance frequency is expressed as www.technologyfuturae.com

  22. Damping admittance Yd and motional admittance Ym of the equivalent circuit are found as follows • Current flowing into the motional branch causes motor movement called motional current, which is expressed by Im= V×Ym www.technologyfuturae.com

  23. EQUIVALENT CIRCUIT PARAMETERS OF USR60 Cd = 9 nF rd = 20 k Lm = 0.1 H r0 = 150 Cm = 168 Pf www.technologyfuturae.com

  24. SPEED characteristics of twusm • Speed of USM is time varying due to changes in 1)temperature - internal losses - frictional interface b/w stator & rotor 2)drive operating conditions -driving frequency, -source voltage -load torque. www.technologyfuturae.com

  25. SPEED FREQUENCY CHARACTERISTIC • Speed of USR60 is controlled in 40-42.5 kHz frequency range www.technologyfuturae.com

  26. EFFECT OF TEMPERATURE AND LOAD CONDITION www.technologyfuturae.com

  27. SPEED CONTROL Speed of an ultrasonic motor can be contolled in 3 ways 1)drive frequency control, 2)applied voltage control, 3) phase difference control of applied voltages www.technologyfuturae.com

  28. Comparison with electromanetic motor • simple structure • faster response time • smaller packaging capability • high torque at low speed • high dynamic resolution • very low inertia • high power to weight ratio • low speed without additional gear or spindle mechanisms, www.technologyfuturae.com

  29. noiseless operation • good control characteristics at start and stop • high dynamics and very good positioning accuracy • require no winding. • not affected by magnetic field www.technologyfuturae.com

  30. limitations • They suffer from potential wear at the rotor / stator interface due to friction which tends to shorten service life • Necessity for a high frequency power supply. • Sensitive to temperature variations. • Difficult to derive a complete mathematical model of USM. www.technologyfuturae.com

  31. APPLICATIONS • Computer disc drives • Camera autofocus • Robotic positioning • Pharmaceuticals handling • Medical cathetes placement • Micropositioning stages • Fibre optic positioning • Manufacturing process control • Semiconductor test equipment www.technologyfuturae.com

  32. SUMMARY • This paper focuses on a new class of motors using high power ultrasonic energy—ultrasonic motors. • Equivalent circuit for an ultrasonic motor is developed. • The operation and characteristics of a travelling wave USM is discussed taking into consideration USR60 • Piezoelectric motors are emerging as an alternative to electromagnetic motor where miniaturization, low power use, and high reliability are required. • USMs are presently being widely used for industrial, medical, robotic, space and automotive applications www.technologyfuturae.com

  33. REFERENCE [1] Güngör Bal Erdal Bekiroglu “Characteristics Estimation Of Travelling-Wave Ultrasonic Motor Using Equivalent Circuit Model” Eleco’2001 International Conference on Electrical and Electronics Engineering 7-11 November 2001, Bursa/TURKEY [2] Yoichi Ogahara, Takashi Maeno”Torque Characteristics Analysis of a Travelling Wave Type Ultrasonic Motor Impressed High Load Torque in Low Speed Range” IEEE International Ultrasonics, Ferroelectrics, and Frequency Control Joint 50th Anniversary Conference2004 [3] Ming Hao and Weishan Chen ” Analysis and Design of a Ring-type Traveling Wave Ultrasonic Motor” Proceedings of the 2006 IEEE International Conference on Mechatronics and Automation June 25 - 28, 2006, Luoyang, China [4] Güngör Bal, Member, IEEE, and Erdal Bekiro˘glu, “A Highly Effective Load Adaptive Servo Drive System for Speed Control of Travelling-Wave Ultrasonic Motor”, IEEE Transactions On Power Electronics, Vol. 20, No. 5, September 2005 1143 [5] www.piezomotor.com www.technologyfuturae.com

  34. Technical Presentations, Research Reviews, New designs & Developments Log On to www.technologyfuturae.com TechnologyFuturae

  35. THANK YOU www.technologyfuturae.com

More Related