SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

Characteristics and Presentation of MDOF FRF Data

ezekiel-larson avatar
ezekiel-larson
19 diapositives · 393 Views · Nov 17, 2014

Characteristics and Presentation of MDOF FRF Data. Modal Analysis and Modal Testing S. Ziaei Rad. Receptance and Impedance FRF Parameters. The Relation between different form of FRF can be stated as before:. A general element of the receptance is given by:.

#characteristics and presentation of mdof frf data #characteristics and presentation of mdof frf data ppt #powerpoint #presentation
Characteristics and Presentation of MDOF FRF Data - slide 1
01 / 19Characteristics and Presentation of MDOF FRF Data
1 / 17

Télécharger la présentation

Characteristics and Presentation of MDOF FRF Data
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. Characteristics and Presentation of MDOF FRF Data Modal Analysis and Modal Testing S. Ziaei Rad

  2. Receptance and Impedance FRF Parameters The Relation between different form of FRF can be stated as before: A general element of the receptance is given by:

  3. Receptance and Impedance FRF Parameters Now, let’s look at the Impedance matrix [Z]: Therefore, we can not simply write: Looking at the definition of a typical element of [Z]:

  4. Receptance and Impedance FRF Parameters • To measure the receptance, we should make sure that just a single excitation force is applying on the structure. • To measure an impedance property all DOFs except one should be grounded. • Such a condition is almost impossible to achieve in practical situation. • Therefore, only types of FRF which can expect to measure directly are those of the mobility or receptance type.

  5. Some Definitions • A Point Mobility (or receptance) is one where the response DOF and the excitation coordinate are identical. • A Transfer Mobility is one where the response and excitation DOFs are different. • A Direct Mobility is one where types of DOFs for response and excitation are identical. (both in x) • A Cross Mobility is one where types of DOFs for response and excitation are not identical. (one in x and other in y direction)

  6. FRF Plot in MDOF System Typical mobility FRF plot for MDOF system (individual modal contribution)

  7. Point and Transfer FRFs Transfer FRF Point FRF

  8. Point and Transfer FRFs • There is an anti-resonance after each resonance in point FRF. • In point FRF the modal constant for every mode is positive, it being the square of a number. • In transfer FRF, there is an anti-resonance or a minima after each resonance. • We expect a transfer FRF between two positions widely separated on the structure to exhibit fewer anti-resonances than one for two points relatively close together. (the further apart are the two points, the more likely are the two eigen vectors elements to alternate in sign as one progress through the modes.

  9. Ponit and transfer FRF for 6DOF system k1 k3 k6 k2 k4 k5 m1 m2 m3 m4 m5 m6 x1 x2 x3 x4 x5 x6 m1=m2=m3=m4=m5=m6=1 Kg k1=k2=k3=k4=k5=k6=100000 N/m

  10. FRFs of 6DOF System H11 H21 H31 H41 H51 H61

  11. Display of FRF Data For Damped Systems • Bode Plots • Nyquist diagrams • Real and Imaginary plots • Three-dimensional plots

  12. 2DOF System k2 k1 m1 m2 x1 x2 m1=m2=1 Kg k1=k2=360 kN/M Hysteretic damping

  13. Bode Plot H12 H11

  14. Nyquist Plot H12 H11

  15. Real and Imaginary H11 H12

  16. 3D Plot

  17. Conclusions • The purpose of this session has been to predict the form which will be taken by plots of FRF data using the different display format. • Although the graphs were taken from some theoretical models, they can help to understand and interpret actual measured data.