1 / 28

Chapter 6 Sectional Views

Chapter 6 Sectional Views. Test Next Week. Will cover Assignments 1-4 (Chap 1-5) AutoCAD commands, basic/advanced Hand sketching isometric, orthographic views AutoCAD orthographics (complete a drawing) Open Book 1.5 hours 12:30 – 2 pm 9 – 12:15 Ch 7 Auxiliary Views.

fala
Télécharger la présentation

Chapter 6 Sectional Views

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 6Sectional Views

  2. Test Next Week • Will cover Assignments 1-4 (Chap 1-5) • AutoCAD commands, basic/advanced • Hand sketching isometric, orthographic views • AutoCAD orthographics (complete a drawing) • Open Book • 1.5 hours 12:30 – 2 pm • 9 – 12:15 Ch 7 Auxiliary Views

  3. Cutting Plane Lines • Use DASHED lines • Can make a layer for Cutting Plane Lines • OR • Format>Linetype>Load DASHED • Modify>Properties, Select Linetype—DASHED\ • Add a leader: Leader tool from Dimension Tbar • Use OSNAP Perpendicular to find pt of arrow • After placing, enter twice, letter A, enter twice • Sometimes messes up with a little leader extension • Arrowheads: DimensionStyles, arrows, scale 0.5

  4. Drawing Hatch • Draw a few closed shapes • Draw Tools > Hatch, then PickPoints and • Click inside area(s) then enter when done • Click OK—hatch will be there • Adjust Hatch size/pattern (Draw>Hatch) • Check out patterns ANSI31, etc. • Change angle and scale

More Related