1 / 7

COMPUTER AIDED DRAFTING 1

Pharos University Faculty of Engineering. Architecture Department. COMPUTER AIDED DRAFTING 1. AE (151). Course Contents. Drawing commands Layers Blocks Hatching Dimension Inquiry Printing and plotting View ports. Lecture 1 Drawing Commands. Object Construction:.

fala
Télécharger la présentation

COMPUTER AIDED DRAFTING 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pharos University Faculty of Engineering Architecture Department COMPUTER AIDED DRAFTING 1 AE (151)

  2. Course Contents • Drawing commands • Layers • Blocks • Hatching • Dimension • Inquiry • Printing and plotting • View ports

  3. Lecture 1 Drawing Commands

  4. Object Construction: - Using Line command with different coordinate systems 1- Absolute coordinate system 2- Polar coordinate system 3- Relative coordinate system 4- Ortho mode - Using Erase commands with different options 1- Erase an object 2- Using Window option for erasing drawing set 3- Using crossing option for erasing drawing set - Using Poly-line command 1- Arc function poly-line 2- Length function poly-line 3- Width function poly-line - Using Multi-line command 1- Double line 2- Multi-line (creating a special mode)

  5. Object Construction: - Using Circle command 1- Center and Radius mode 2- Center and Diameter mode 3- Two point mode 4- Three-point mode 5- Tangent-Tangent Radius mode 6- Application for constructions different shapes - Using Arc command 1- Three-point mode 2- Different options for Arc drawing - Using different Line type 1- Creating line type 2- Controlling line type 3- Line-type Scale 4- Using Properties option for controlling line type 5- Using Match – Properties for line type

  6. Drawing commands :pull down menu

  7. Object Construction: -Object Snap and drawing accuracy 1- Single point selection 2- Running mode - Using special Construction Shapes 1- Rectangle 2- Spline Object Snap

More Related