1 / 12

MPPC tests - Warsaw

MPPC tests - Warsaw. Michał Dziewiecki Robert Kurjata Robert Sulej Marcin Ziembicki. The Machine. Software. Running on single computer Full control of the device Data acquisition via Ethernet On-line data processing (10.5 MB/s) Automatic parameters calculation (gain, V br , …).

farren
Télécharger la présentation

MPPC tests - Warsaw

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MPPC tests - Warsaw Michał Dziewiecki Robert Kurjata Robert Sulej Marcin Ziembicki

  2. The Machine

  3. Software • Running on single computer • Full control of the device • Data acquisition via Ethernet • On-line data processing (10.5 MB/s) • Automatic parameters calculation (gain, Vbr, …)

  4. Histograms fitting

  5. Measurements status • Processed till now: ≈600 pcs • ≈100 devices measured at multiple voltages • Finish: within next two weeks (huge throughput) • Some devices need to be tested once again (≈5%)

  6. Results – relative gain at Vop Calculations based on fft-filtered histogram Calculations based on gaussian fit

  7. Results – dark rate 0.5 (red) and 1.5 p.e (blue) dark rates for 570 sensors operating at nominal Vop Dark rates histogram

  8. Results – dark rate Warsaw vs Hamamatsu dark rate measurements Two method of dark rate measurement: using discriminator or sampling ADC

  9. Dark rate measured with discriminator Blue: dark rate estimated using ADC (only 3 batches) Results – PDE (some problems) Flasher settings were changed during measurements Integration time was changed PDE (with dark-rate-correction) for whole series Relative PDE histogram

  10. Gain & dark-rate vs voltage 0.5 p.e. Automatically calculated VBR 1.5 p.e. Gain vs Vop

  11. CT & AP • Necessary data is acquired • CT and AP rates are not calculated at the moment

  12. Thank you.

More Related