1 / 19

To Date….

Ideal Monatomic Gas C v = 3/2R C p = C v + R = 5/2 R Polyatomic Gas C v > 3/2R C p > 5/2 R. To Date…. All Ideal Gases • D E = q + w • w = -P ext D V (for now) • D E = nC v D T = q V • D H = nC p D T = q P • If D T = 0, then D E = 0 and q = -w.

flynn
Télécharger la présentation

To Date….

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ideal Monatomic Gas Cv = 3/2R Cp = Cv + R = 5/2 R Polyatomic Gas Cv > 3/2R Cp > 5/2 R To Date…. All Ideal Gases • DE = q + w • w = -PextDV (for now) • DE = nCvDT = qV • DH = nCpDT = qP • If DT = 0, then DE = 0 and q = -w

  2. Lecture 3: State Functions • Reading: Zumdahl 9.3, 9.4 • Outline • Example of Thermo. Pathways • State Functions • (9.4…for laboratory)

  3. Thermodynamic Pathways: an Example • Example 9.2. We take 2.00 mol of an ideal monatomic gas undergo the followng: • Initial (State A): PA = 2.00 atm, VA = 10.0 L • Final (State B): PB = 1.00 atm, VB = 30.0 L • We’ll do this two ways: Path 1: Expansion then Cooling Path 2: Cooling then Expansion

  4. Thermodynamic Jargon • When doing pathways, we usually keep one variable constant. The language used to indicate what is held constant is: • Isobaric: Constant Pressure • Isothermal: Constant Temperature • Isochoric: Constant Volume

  5. Thermodynamic Path: A series of manipulations of a system that takes the system from an initial state to a final state isochoric isobaric

  6. Pathway 1 • Step 1. Constant pressure expansion (P = 2 atm) from 10.0 l to 30.0 l. • PDV = (2.00 atm)(30.0 L - 10.0 L) = 40.0 L.atm = (40.0 L atm)(101.3 J/L.atm) = 4.0 x 103 J = -w • And DT = PDV/nR = 4.05 x 103 J/(2 mol)(8.314 J/mol.K) = 243.6 K

  7. Pathway 1 (cont.) • Step 1 is isobaric (constant P); therefore, • q1 = qP = nCpDT = (2mol)(5/2R)(243.6 K) = 1.0 x 104 J = DH1 • And DE1 = nCvDT = (2mol)(3/2R)(243.6 K) = 6.0 x 103 J (check: DE1 = q1 + w1 = (1.0 x 104 J) -(4.0 x 103 J) = 6.0 x 103 J )

  8. Pathway 1 (cont.) • Step 2: Isochoric (const. V) cooling until pressure is reduced from 2.00 atm to 1.00 atm. • First, calculate DT: • Now, DT = DPV/nR (note: P changes, not V) = (-1.00 atm)(30.0 L)/ (2 mol)(.0821 L atm/mol K) = -182.7 K

  9. Pathway 1 (cont.) • q2 = qv = nCvDT = (2 mol)(3/2R)(-182.7 K) = - 4.6 x 103 J • and DE2 = nCvDT = -4.6 x 103 J • and DH2 = nCpDT = -7.6 x 103 J • Finally w2 = 0 (isochoric…no V change)

  10. Pathway 1 (end) • Thermodynamic totals for this pathway are the sum of values for step 1 and step 2 q = q1 + q2 = 5.5 x 103 J w = w1 + w2 = -4.0 x 103 J DE = DE1 + DE2 = 1.5 x 103 J DH = DH1 + DH2 = 2.5 x 103 J

  11. Next Pathway • Now we will do the same calculations for the green path.

  12. Pathway 2 • Step 1: Isochoric cooling from P = 2.00 atm to P = 1.00 atm. • First, calculate DT: • DT = DPV/nR = (-1.00 atm)(10.0 L)/ (2 mol)R • = -60.9 K

  13. Pathway 2 (cont.) • Then, calculate the rest for Step 1: q1 = qv = nCvDT = (2 mol)(3/2 R)(-60.9 K) = -1.5 x 103 J = DE1 DH1 = nCPDT = (2 mol)(5/2 R)(-60.9 K) = -2.5 x 103 J w1 = 0 (constant volume)

  14. Pathway 2 (cont.) • Step 2: Isobaric (constant P) expansion at 1.0 atm from 10.0 l to 30.0 l. DT = PDV/nR = (1 atm)(20.0 L)/(2 mol)R = 121.8 K

  15. Pathway 2 (cont.) • Then, calculate the rest: q2 = qp = nCPDT = (2 mol)(5/2 R)(121.8 K) = 5.1 x 103 J = DH2 DE2 = nCvDT = (2 mol)(3/2 R)(121.8 K) = 3.1 x 103 J w1 = -PDV = -20 l.atm = -2.0 x 103 J

  16. Pathway 2 (end) • Thermodynamic totals for this pathway are again the sum of values for step 1 and step 2: • q = q1 + q2 = 3.6 x 103 J • w = w1 + w2 = -2.0 x 103 J • DE = DE1 + DE2= 1.5 x 103 J • DH = DH1 + DH2 = 2.5 x 103 J

  17. Pathway 1 q=5.5 x 103 J w=-4.1 x 103 J DE= 1.5 x 103 J DH=2.5 x 103 J Pathway 2 q = 3.6 x 103 J w = -2.0 x 103 J DE = 1.5 x 103 J DH = 2.5 x 103 J Comparison of Path 1 and 2 Note: Energy and Enthalpy are the same, but heat and work are not the same!

  18. State Functions • A State Function is a function in which the value only depends on the initial and final state….NOT on the pathway taken. • In this example, start in Seattle, end in Chicago, but you take different paths to get from one place to the other.

  19. Thermodynamic State Functions • Thermodynamic State Functions: Thermodynamic properties that are dependent on the state of the system only. (Example: DE and DH) • Other variables will be dependent on pathway (Example: q and w). These are NOT state functions. The pathway from one state to the other must be defined.

More Related