1 / 6

White Light-Emitting Diodes

White Light-Emitting Diodes. Robert Nicholas & Daniel Freno Junior Lab Spring 2007. White LEDs. The structural and operational characteristics of white LEDs will be discussed. Spectra will be taken from both a traditonal lamp and a white LED for comparison.

fmorelock
Télécharger la présentation

White Light-Emitting Diodes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. White Light-Emitting Diodes Robert Nicholas & Daniel Freno Junior Lab Spring 2007

  2. White LEDs • The structural and operational characteristics of white LEDs will be discussed. • Spectra will be taken from both a traditonal lamp and a white LED for comparison http://www.hebeiltd.com.cn/leds/Mr.Led.jpg

  3. Energy Band Diagrams Holes • Electrons are pumped from the valence band to the conduction band. • Upon relaxation, light is emitted to conserve energy. • Direct gap semiconductor materials are needed for optoelectronic devices. • Momentum must be also conserved. • For momentum to be conserved in an indirect gap semiconductor, phonon-assisted transitions must take place. • Three particle processes are very improbable. • Applied voltage across a p-n junction causes electrons to be promoted to the conduction band, leaving holes behind. • The electrons and holes will then be swept towards each other where they recombine, emitting light. • This area is referred to as the depletion region.

  4. Schematics • Physical structure of a white LED. • Primary emission is from an InxGa1-xN LED. • Primary blue light is partially absorbed by a phosphor [Ce:YAG ( Cerium doped Yttrium Aluminum Garnet)] layer. • Results in secondary, redshifted phosphorescence. • Wavelengths are mixed and appear to the human eye as white.

  5. Spectra of phosphor based white LED vs. filament lamp • The intensity of the LED is larger, as expected. • The lower energy peak of the white LED is from the InGaN diode. • The broader redshifted peak is from the secondary emission due to the phosphor. InxGa1-xN Ce:YAG

  6. References • http://micro.magnet.fsu.edu/primer/lightandcolor/ledsintro.html • http://en.wikipedia.org/wiki/LED • http://www.hebeiltd.com.cn/leds http://upload.wikimedia.org/wikipedia/commons/c/cb/RBG-LED.jpg

More Related