1 / 25

ION GNSS 2012 Nashville, TN Sept. 17-21, 2012

ION GNSS 2012 Nashville, TN Sept. 17-21, 2012. The L1-SAIF Signal How was it designed to be used?. Takeyasu Sakai Electronic Navigation Research Institute. Introduction. QZSS (Quasi-Zenith Satellite System) program :

garykedwards
Télécharger la présentation

ION GNSS 2012 Nashville, TN Sept. 17-21, 2012

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ION GNSS 2012 Nashville, TN Sept. 17-21, 2012 The L1-SAIF Signal How was it designed to be used? Takeyasu Sakai Electronic Navigation Research Institute

  2. Introduction • QZSS (Quasi-Zenith Satellite System) program: • Regional navigation service broadcast from high-elevation angle by a combination of three or more satellites on the inclined geosynchronous (quasi-zenith) orbit; • Broadcast GPS-like supplemental signals on three frequencies and Two Augmentation Signals, L1-SAIF and LEX; • The first QZS satellite was successfully launched on Sept. 11, 2010. • L1-SAIF (Submeter-class Augmentation with Integrity Function) signal: • Augmentation service on L1 single frequency designed for mobile users; • Signal design: SBAS-like message stream on L1 C/A code (PRN 183). • ENRI has been developing L1-SAIF signal and conducting experiments: • L1-SAIF Master Station (L1SMS) experimental facility installed at ENRI; • IS-QZSS contains specification of L1-SAIF signal as well as other signals.

  3. GPS/GEO QZS QZSS Concept • Broadcast signal from high elevation angle; • Applicable to navigation services for mountain area and urban canyon; • Augmentation signal from the zenith could help users to acquire other GPS satellites at any time. • Footprint of QZSS orbit; • Centered at longitude of 135E; • Eccentricity 0.075, Inclination 43deg.

  4. 8:40 15:20 Orbital Planes of QZSS (3 SVs) Inclined Geosynchronous Orbit Apogee 40,000km Perigee 32,000km Ground Track • Semi-major axis (42,164km) is equal to GEO orbit: synchronous with rotation of the earth; • Inclined obit makes ground track ‘8’-figure; Called IGSO or Quasi-Zenith Orbit; • With three or more satellites on the same ground track, navigation service can be provided from the zenith to regional users at any time.

  5. 80.3 deg 75.9 deg 3 satellites constellation @Tokyo 4 satellites constellation @Tokyo Broadcast from the Zenith • The constellation of 3 or more QZS satellites is capable of broadcasting signals from near the zenith to regional users at any time; • This property is attractive for augmentation channel; Users can expect to receive the augmentation signal anytime anywhere.

  6. 25.3m Radiation Cooled TWT TWSTFT Antenna Successfully launched on Sept. 11, 2010 and settled on Quasi-Zenith Orbit (IGSO). Nickname: “Michibiki” C-band TTC Antenna Laser Reflector L1-SAIF Antenna L-band Helical Array Antenna Space Segment: QZS-1

  7. Signal Channel Frequency Bandwidth Min. Rx Power Interoperability 1575.42 MHz GPS-like supplemental signals with minimum modifications from GPS signals QZS-L1C L1CD 24 MHz –163.0 dBW L1CP 24 MHz – 158.25 dBW QZS-L1-C/A 24 MHz – 158.5 dBW QZS-L2C 1227.6 MHz 24 MHz – 160.0 dBW QZS-L5 L5I 1176.45 MHz 25 MHz – 157.9 dBW L5Q 25 MHz – 157.9 dBW QZS-L1-SAIF 1575.42 MHz 24 MHz – 161.0 dBW SBAS-like augmentation signal (250bps) QZS-LEX 1278.75 MHz 42 MHz – 155.7 dBW QZSS-specific augmenta-tion signal (2kbps) Frequency Plan Find detail in IS-QZSS document.

  8. QZSS L1-SAIF Signal • QZSS broadcasts wide-area augmentation signal: • Called L1-SAIF (Submeter-class Augmentation with Integrity Function); • Augmentation signal for mobile users designed and developed by ENRI. • L1-SAIF signal offers: • Wide-area differential correction service for improving position accuracy; Target accuracy: 1 meter for horizontal; • Integrity function for safety of mobile users; and • Ranging function for improving position availability. • Augmentation to GPS L1C/A based on the SBAS specifications: • Broadcast on L1 freq. with RHCP; Common antenna and RF front-end; • Modulated by BPSK with C/A code (PRN 183); • 250 bps data rate with 1/2 FEC; Message structure is identical with SBAS; • Differences from SBAS: PRN, large Doppler, and some additional messages. • Developed easily if one has the experience to develop SBAS-capable receiver; • Specification of L1-SAIF: See IS-QZSS document (Available at JAXA HP).

  9. Ranging Function QZS satellites GPS Constellation Error Correction Ranging Signal Integrity Function L1-SAIF Signal Functions 3 Functions by L1-SAIF • Three functions by a single signal: ranging, error correction (Target accuracy: 1m), and integrity; • User receivers can receive both GPS and L1-SAIF signals with a single antenna and RF front-end; • Message-oriented information transmission: Flexible contents. User GPS/L1-SAIF Receivers SAIF： Submeter-class Augmentation with Integrity Function

  10. Clock Correction • Same contribution to any user location; • Not a function of location; • Needs fast correction. Ionospheric Correction • Function of user location; • Up to 100 meters; • Vertical structure may be described as a thin shell. Orbit Correction • Different contribution to different user location; • Not a function of user location; but a function of line-of-sight direction; • Long-term correction. Ionosphere Tropospheric Correction • Function of user location, especially height of user; • Up to 20 meters; • Can be corrected enough by a fixed model. Troposphere • Broadcast separate corrections to each error factor to enlarge the service area; • User receivers reconstruct pseudorange corrections with regard to its location. WADGPS Concept

  11. Preamble 8 bits Message Type 6 bits Data Field 212 bits CRC parity 24 bits Transmitted first Sync to GPS epoch L1-SAIF Message Structure 250 bits per second Note: Message Types 29 to 61 have no definitions in the current specification of SBAS. • Message structure is identical with SBAS; • Basic function is supported by only SBAS-compatible messages; Easy to develop!

  12. GPS Satellites QZS Ranging Signal L1-SAIF Signal K-band Uplink Ranging Signal Measure- ments L1-SAIF Message GEONET L1SMS QZSS MCS GSI Server (Tokyo) ENRI (Tokyo) JAXA TKSC (Tsukuba) L1-SAIF Master Station • L1-SAIF Master Station (L1SMS): • Generates L1-SAIF message stream in realtime and transmits it to QZSS MCS developed by and installed at JAXA; • Installed at ENRI, Tokyo; 90km from JAXA Tsukuba Space Center; • Dual frequency GPS measurements at some locations in Japan necessary to generate L1-SAIF messages are sent from GEONET in realtime.

  13. Message Generator Ionosphere Processor I/F Storage Storage Storage Router to GEONET/JAXA GEONET Server UPS UPS L1SMS at ENRI

  14. System Horizontal Error Vertical Error Standalone GPS L1-SAIF Augmentation Standalone GPS RMS 1.45 m 2.92 m Max 6.02 m 8.45 m L1-SAIF RMS 0.29 m 0.39 m Max 1.56 m 2.57 m Preliminary Result 6 reference stations User location for this test L1-SAIF expe- rimental area • Example of user position error at Site 940058 (Takayama); • Realtime operation with MSAS-like 6 reference stations in Japan; • Period: 19-23 Jan. 2008 (5 days). Note: Results shown here were obtained with geodetic-grade antenna and receivers at open sky condition.

  15. Realtime Operation using GEO GPS Satellites ETS-VIII Satellite L1-SAIF L1SMS in Tokyo GPS/L1-SAIF Rx in Sendai Airport 350 km Separation • ENRI joined communication experiment of ETS-VIII geostationary satellite; • L1SMS transmitted L1-SAIF message to ETS-VIII; Received L1-SAIF message was input to the GPS/L1-SAIF receiver and processed in realtime; No ranging function; • Successfully completed in Feb. 2009.

  16. Resulted Position via GEO 2009/2/17 01:21:39 to 07:23:14 (6 hours) Standalone GPS L1-SAIF Augmentation H Error RMS = 1.221m V Error RMS = 4.043m H Error RMS = 0.412m V Error RMS = 0.464m

  17. Experiment by Car GPS+IMU • L1-SAIF technical verification experiment: • L1-SAIF is originally planned as an augmentation for mobile users; • Conducted experiment with a car; • Location: urban/suburban environment, freeway; • Experiment period: Dec. 2010 to March 2011. • Experiment setup: • Reference: GPS+IMU sensor; • Post-processing with GEONET stations (20- 30 km separation) for accurate reference; • GPS/L1-SAIF receiver and PC in cabin; • Receives L1-SAIF signal on PRN 183; • Applies L1-SAIF corrections in realtime and outputs position fix. GPS/L1-SAIF Receiver

  18. GEONET Ichinomiya 2 km GEONET Nakamichi On the Freeway Plan View of the Route Typical Situation • On Dec. 14, 2010; QZS near the Zenith; • About 10 km drive at the Kofu Basin on Chuo Freeway going westward from Tokyo; • Plain ground with less bridges across the Freeway.

  19. Freeway: No Augmentation Chuo Freeway: GPS without Augmentation Horizontal Position Error, m 1.2m UTC Time 1:22:08 to 1:37:08 15min

  20. Freeway: L1-SAIF Augmented Chuo Freeway: L1-SAIF Augmentation Horizontal Position Error, m 0.5m UTC Time 1:22:08 to 1:37:08 15min

  21. GEONET Tsukuba 1 1 km In the City Plan View of the Route Typical Situation • On Dec. 16, 2010; QZS near the Zenith; • About 6 km drive in West part of Tsukuba City in Ibaraki Pref.; • Road on the ground level with less tall buildings around.

  22. City: No Augmentation Tsukuba: GPS without Augmentation Horizontal Position Error, m 2.0m UTC Time 5:30:01 to 5:45:01 15min

  23. City: L1-SAIF Augmented Tsukuba: L1-SAIF Augmentation Horizontal Position Error, m 0.6m UTC Time 5:30:01 to 5:45:01 15min

  24. Ranging by L1-SAIF 2011-08-18 02:18:45 to 21:16:20 L1-SAIF (PRN183) Ranging ON L1SMS Configuration: 6 DF GPS GMS (GEONET) 4 SF GPS/QZS GMS (JAXA) User location: @ENRI, Tokyo Receiver: JAVAD ALPHA-G3T Processing by ENRI Mask 5deg, Smoothing 100s

  25. Conclusion • ENRI has developed L1-SAIF augmentation signal: • Planned as an augmentation for mobile users; • Signal design: SBAS-like message stream on L1 C/A code (PRN 183); • The first QZSS satellite “Michibiki” has been broadcasting L1-SAIF signal. • Experiments for L1-SAIF: • ENRI has implemented L1-SAIF Master Station (L1SMS) which generates augmentation message stream in realtime and transmit it to QZSS MCS; • Preliminary tests have shown promising performance; • Technical verification experiments confirmed the performance for mobile users. • Ongoing work: • Continue experiments regularly (two weeks per month); • Define messages to be used to broadcast regional information; • Support augmentation to GLONASS satellites for further improvement of availability; • Support dual frequency operations. • Information available at: http://www.enri.go.jp/sat/qzss_e.htm

More Related