1 / 18

MATSE 259

MATSE 259. Lecture 2: Introduction to Aluminum Alloys Christopher L. Muhlstein, Ph.D. Department of Materials Science and Engineering The Pennsylvania State University University Park, PA. Last Lecture. Fundamentals of materials science and engineering Classes of materials properties

gjohnson
Télécharger la présentation

MATSE 259

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MATSE 259 Lecture 2: Introduction to Aluminum Alloys Christopher L. Muhlstein, Ph.D. Department of Materials Science and Engineering The Pennsylvania State University University Park, PA

  2. Last Lecture • Fundamentals of materials science and engineering • Classes of materials properties • Three classes of materials • Steel nomenclature

  3. Lecture 2: Key Concepts and References • Aluminum alloy nomenclature • Introduction to phases • Reference (Callister) • sects. 3.12, 4.3, 5.1 • pps. 261-262 • chapter 6

  4. Al Structural Alloys Lotus Elise 190 hp 1984 lbs 0-60 mph - 4.9 sec top speed - 150 mph 27 mpg highway $46K

  5. Automotive Application of Al Alloys • Lotus versatile vehicle architecture system (VVA) • Almost all “aluminum high pressure die-castings, stampings, and extrusions Advanced Materials & Processes, July 2005, p 29

  6. Which “aluminum” is it? 1050 1145 2014 2024 2219 2618 3003 3004 3105 4032 4043 5005 5052 5083 5154 5182 5262 5652 6010 6061 6262 6463 7005 7050 7072 7075 7175 7178 7475 7229

  7. Aluminum Alloy Overview • Low density (~34% of steel) • High thermal and electrical conductivity • Corrosion resistant in ambient air • Low melting point (660°C) • Modified mechanical properties via cold work, alloying, and heat treating

  8. Aluminum Alloy Nomenclature • Aluminum Association Number • 4 digit number + temper designation (letter and sometimes numbers) • Wrought vs. cast designation • 4 digits, no punctuation (e.g. 6061) • 4 digits, decimal point between last two digits (e.g. 295.0)

  9. Wrought Aluminum Alloy Nomenclature • First digit indicates alloy group • 1XXX Aluminum ≥99.00% • 2XXX Copper • 3XXX Manganese • 4XXX Silicon • 5XXX Magnesium • 6XXX Magnesium + Silicon • 7XXX Zinc • 8XXX other elements • 9XXX Unused series

  10. 1XXX Series Wrought Aluminum Alloys • 10XX are unalloyed • Last two digits give minimum aluminum percentage • 1035 contains 99.35% aluminum • The second digit indicates control over specific impurities (e.g. silicon)

  11. Cast Aluminum Alloy Nomenclature • First digit indicates alloy group • 1XX.X Aluminum >99.00% • 2XX.X Copper • 3XX.X Silicon with added copper and/or magnesium • 4XX.X Silicon • 5XX.X Magnesium • 7XX.X Zinc • 8XX.X Tin • 9XX.X Other elements • Second two digits identify specific alloy • Last digit indicates casting (0) or ingot (1) • Letter may be appended, in some cases

  12. 1XX.X Series Cast Aluminum Alloys • Second two digits indicate minimum aluminum percentage • 135.0 Aluminum is a 99.35% aluminum casting • 135.1 Aluminum is a 99.35% aluminum ingot

  13. Material Structure • Amorphous materials • Single crystal materials • Polycrystalline materials • Grain boundaries • Isotropic and anisotropic properties Small crystalline nuclei Growth of crystallites Solidified Optical micrograph Schematic of stages of solidification of a polycrystalline material; the square grids depict unit cells Callister, Materials Science and Engineering: An Introduction (2003)

  14. Names? Crystal structure(s)? Microstructure? Structural Materials are Complicated! Transmission electron micrograph of 7150-T651 Optical micrographs of various cast irons. Callister, Materials Science and Engineering: An Introduction (2003)

  15. Microstructural Evaluation (Optical) • Optical Microscopy • Grind • Polish • Etch/stain/anodize • Image

  16. Etchants Reveal Microstructure Polished Gray Iron Polished and Etched Gray Iron

  17. Wrought Aluminum Microstructures 10% Reduction 40% Reduction 5457-O plate, Barker’s reagent 80% Reduction ASM, Metals Handbook Volume 9 (1995)

  18. Steel Microstructures Pearlite Tempered Martensite Martensite Spheroidite Callister, Materials Science and Engineering: An Introduction (2003)

More Related