1 / 52

Comparing DC Line Scan and MOKE Line Scans for Hysteresis Analysis

Analyzing separate lines scans for hysteresis per point, comparing DC line scan with MOKE line scans. Includes raw data, cleaned and normalized 2ω R and Phi data, and fitting analysis.

guy-pruitt
Télécharger la présentation

Comparing DC Line Scan and MOKE Line Scans for Hysteresis Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DC Line Scan comparison1 DC line scan3 MOKE line scans:1 hysteresis per point3 separate lines scans

  2. 1st line: y=855 Start of ROI: y=1655 Slight position shift ~75μm

  3. 2ω R Raw Data

  4. 2ω Phi Raw Data

  5. DC input and output Raw data DC output is Red DC input is Black

  6. Cleaned and Normalized 2ωR(by input)

  7. Cleaned 2ωPhi

  8. Average of normalized 2ωR

  9. Fitted 2ωR and subtracted

  10. Fits

More Related