1 / 12

Cryo and AFE IIt Update

Cryo and AFE IIt Update. MICE Collaboration Meeting October 22, 2005 RAL A. Bross. Cryo Update I. The cryo-system for the VLPCs has been operated extremely reliably and stably from May through the end of the KEK TB However, it was felt that the thermal-link design could be made more robust

haines
Télécharger la présentation

Cryo and AFE IIt Update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cryo and AFE IIt Update MICE Collaboration Meeting October 22, 2005 RAL A. Bross

  2. Cryo Update I • The cryo-system for the VLPCs has been operated extremely reliably and stably from May through the end of the KEK TB • However, it was felt that the thermal-link design could be made more robust • A bolted concept has now been detailed and will be used in all subsequent systems • The drawing package has been “marked-up” for update • The drawing package is currently in the Fermilab drafting queue. • There are a few outstanding issues that still need some thought • Is the top plate stiff enough against atmospheric pressure? • Can the new thermal link design permit non-positive clamping of the cassette so that a cassette could be removed from the cryostat without having to break the cryo-vacuum

  3. Cryo Update II

  4. AFE IIt Update • The AFE IIt prototypes (10) have arrived and are under test • The production run of Tript chips is complete, and approximately 8200 die have been packaged. • Enough for about 500 boards

  5. AFE IIt

  6. AFE IIt test Status • The AFE IIt board test is making very good progress • All power applied (AFEI power supply values) • 1553 communications functional • JTAG programming chain working • RT1553 FPGA operating properly • PIC microcontroller operating properly using new C code (at least for those tests we have performed so far) • HELPER FPGA operating properly for the functions we have checked so far • CLOCKGEN FPGA operating properly, clocks being generated, phase control from the PC, through 1553 is working properly. • Program and read the FLASH memory • Use the FLASH to program the DFPGAs • Use the FLASH to program the AFPGAs • ADC for measuring bias and temp is working • Bias DACs, heater DACs are working • Next Steps • Test the slow communications to AFPGAs and DFPGAs • Apply power to TriP-t chips and ADCs • Run the TriP-t and ADCs through the ACQUIRE/DIGITIZE/READOUT cycle • Lots of FPGA programming to Do!

  7. TriPt • We now have all the packaged TriPts that will be needed • Preliminary testing: • Linearity problem at small charge input has indeed been fixed

  8. TriPt II • Bandwidth performance looks good

  9. TriPt III • Discriminator Performance as expected • Likely not an issue with MICE

  10. TriPt IV • TDC Gain has large spread • This was expected and can be taken out (calibration) off-line

  11. TriPt V • Time-walk as expected.

  12. Issues that will Need some Thought • AFE IIt board temperature and bias calibration • Does MICE need a test stand (like D0 has) to do this operation? • LED pulser data • Plan to dismount wavguides and mount a LED pulser or excite the fibers with blue LEDs? • New LVSB Board • AVNET (timing) board incorporated into LVSB or possibly the AFE IIt can be programmed to take over the functionality of the AVNET board • Rate • If we keep analog and timing information we are limited to: • 1/(150 X 19 ns) @350 muons per msec of spill • It is possible that clever (extreme) programming of the AFE IIt can push this up a bit – 400-450 or so. • If we drop analog and timing and only use discriminators, we can run at 7 MHz.

More Related