1 / 32

Comprehensive Guide to Enrolling and Configuring Devices on the Security Controller

This guide outlines the steps to access the installer's menu and enroll various devices to a security controller, including wired and wireless sensors. Learn how to manage device deletion, diagnostic testing, and zone configurations. Key procedures include observing the LCD display after enrolling magnetic contacts, performing diagnostic tests on wireless devices, and modifying zone settings such as name and type. This resource ensures proper installation and optimization of your security system.

hallie
Télécharger la présentation

Comprehensive Guide to Enrolling and Configuring Devices on the Security Controller

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Accessing the Installer’s Menu

  2. The entire cycle

  3. Enrolling a Device • To enroll a device means to link a device to the controller, eg, enroll a wired contact, enroll a wireless sensor, etc • When asked to Delete using the OFF key,Use the Disarm button

  4. Once a device is enrolled, the controller can detect it. • If you have enrolled the magnetic contacts, open the contacts and observe what is displayed on the LCD display, such as, “ Back Door Open”

  5. Observe this • After Enroll

  6. How to delete

  7. Observe this After Delete

  8. Diag. Testing 10. Diagnostics WL Sensors Test Open door Z01 NOT-OK Front Door Perform Diagnostic Test of Wireless Devices Fail PASS Open door Z01 STRONG Front Door

  9. 01 Zone no: 3. Define Zone Zone No : 01 Z01: TYPE -- 2. Perimeter Done! Z01: NAME -- Back door Done! How to change Zone Type How to change Zone Name How to change Chime Z01: CHIME Chime OFF Done! Partition 1 Z01: PARTITION Done!

  10. Enrol Proximity Tag • EnrolEnrolProg Tag <ok> • Tag No 1 <ok> Present Tag: Tag No 1 <next> • To return clich “home” <ok> to exit

  11. Define Control Panel • Installer Mode <next> • Define Panel <Ok> • Entry Delay 1

  12. After Enroll After Delete Observation

  13. How to stop alarm

  14. Panel Buttons

  15. What different Arm means

  16. How to Arm Away

  17. How to Arm Home

  18. From Installer Manual

  19. Basic

  20. Warning !

More Related