1 / 25

Esci 203, Earthquakes & Earth Structure Gravity and isostasy

Esci 203, Earthquakes & Earth Structure Gravity and isostasy. John Townend EQC Fellow in Seismic Studies john.townend@vuw.ac.nz. Lumpy Earth. Image courtesy of GRACE, U. Texas. Overview. Galileo Galilei (1564 –1642. Newton’s Law of Gravitation Factors that influence gravity The geoid

hana
Télécharger la présentation

Esci 203, Earthquakes & Earth Structure Gravity and isostasy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Esci 203, Earthquakes & Earth StructureGravity and isostasy John Townend EQC Fellow in Seismic Studies john.townend@vuw.ac.nz

  2. LumpyEarth • Image courtesy of GRACE, U. Texas

  3. Overview Galileo Galilei (1564–1642 • Newton’s Law of Gravitation • Factors that influence gravity • The geoid • Measuring gravity • Gravity anomalies • Isostasy and ice-sheet loading

  4. Newton’s law of gravitation m2 r • Force exerted by m1 on m2, and vice versa • Gravitational acceleration of a mass due to m1 m1

  5. True shape Gravity on an oblate spheroid rpole < req, gpole > geq • Latitude effect due to Earth’s rotation rpole~6357 km req~6378 km Exaggerated shape!

  6. Reference gravity formula • The coefficients a and b are related to the Earth’s ellipticity and rate of rotation • About 40% of the variation in gravity with latitude is due to the Earth’s shape, and 60% is due to its rotation • In geophysics, we’re interested in departures from reference gravity g(l) = geq (1 + a sin2 l + b sin4 l)

  7. Describing the Earth’s shape Ellipsoid • Ellipsoid (“oblate spheroid of revolution”) • An idealised representation of the Earth’s shape, obtained by revolving an ellipse about the Earth’s rotation pole • Geoid (“equipotential surface”) • A surface of equal gravitational potential, equivalent to mean sea level over oceans Earth’s surface Geoid

  8. The geoid • The geoid is a gravitational equipotential surface: what is shown are differences between the geoid height (in metres) and the ellipsoid, which is an idealised model of the Earth’s shape

  9. Why measure gravity? • Measurements of gravitational acceleration (“gravity”) provide information about density • Exploration geophysics • Reconnaissance in sedimentary basins • Characterisation of ore bodies or groundwater aquifers • Solid earth geophysics • Determination of crustal/lithospheric structure • Measurement of the shape of the Earth • Investigations of glacial rebound and mantle viscosity

  10. Measuring gravity We usually measure relative differences in gravity LaCoste & Romberg Model “G” Could also use a pendulum: (T2/T1)2 = g2/g1 Zero-length spring L = mg/k

  11. Relative gravity meter’s response to density variations gravity high gravity low High density Low density Local gravity high can be related to a high-density body within the crust, while a gravity low can be related to a lower than average density.

  12. Typical densities

  13. Gravity reduction • Latitude • Temporal changes Tidal and drift corrections • Effect of elevation “Free-air correction” dgFA = gSL– gh = 2h/RgSL • Mass of intervening rocks “Bouguer correction” dgBouguer = 2GrBouguerh • Effect of topography “Terrain correction” Measurement point h rBouguer Datum (sea level)

  14. Tidal and drift corrections gobs Base station Drift curve time gobs • By resurveying several times at a base station, we can correct for tidal and instrumental drift time

  15. Bouguer anomaly BA = gobs– g(l)– dgFA– dgBouguer + dgterrain = gravity data corrected for latitude, elevation, mass beneath the measuring point and surrounding topography • Usually given in mgal (after Galileo) or “gravity units”: 1 g.u. = 0.1 mgal = 10–6 m s–2 • To obtain 0.1 g.u. accuracy (~10–8 times the gravitational acceleration at the Earth’s surface), you must know your latitude to within ~10 m and height to within ~10 mm!

  16. GRACE Gravity Recovery And Climate Experiment

  17. Local anomalies and models • Subtract a regional gravity field to obtain a local anomaly Skridulaitis (1997) B.Sc. Hons. Thesis Wellington fault … which we model in terms of subsurface density contrasts Alluvium Dr = –440 kg m–3 Basement

  18. h h d d rc r1 rd D rc t r’ r rm rm Archimedes and isostasy Airy’s hypothesis Variations in thickness Pratt’s hypothesis Variations in density

  19. Gravity profile in isostatic equilibrium High relief topography is compensated with a low density crustal root. First observed in India by Everest in the 1850’s.

  20. Non-isostatically compensated profile

  21. Non-isostatically compensated profile

  22. CW from TL: Bouguer Residual Model Gradient

  23. Using gravity to measure fault slip rates Davy et al., NZJGG, 2013

  24. Reading material • Mussett and Khan • Chapter 8: Sections 8.1–8.7 • Chapter 9: Sections 9.1 and 9.5 • Fowler (1992) • Chapter 5, especially sections 5.3–5.6

More Related