130 likes | 211 Vues
…… “ Delivering Green ”. WeCare Organics LLC 9289 Bonta Bridge Road Jordan, New York 13080 315-689-1937 www.wecareorganics.com. Market Driven Biosolids Management. Goal is to generate revenue and/or reduce cost.
E N D
……“Delivering Green” WeCare Organics LLC 9289 Bonta Bridge Road Jordan, New York 13080 315-689-1937 www.wecareorganics.com
Market DrivenBiosolids Management • Goal is to generate revenue and/or reduce cost. • Products are blended, shred, screened, loaded trucked, spread, dozed and seeded. • Product should have low plasticity, need to be friable. • Products need to be dry; > 50% solids. • Low solids biosolids require special handling considerations. “Not Third Party Friendly”.
Thin Film Drying for Enhanced Dewatering • Proposed to be used as extension of dewatering mechanism. • Simple, single pass, indirect drying application. • Can be run in line with existing dewatering facilities. • . • Reduce tonnage/volume by over 50%.
WeCare Thin Film Dryer • Dryer can be used as stand alone or in combination with alkaline technology, composting technology, incineration, anaerobic digestion, gasification or landfilling • Used to dry pasty, viscous materials that are difficult to dry ( no fouling) • Dryer can receive low solids cake without back mixing. • Dryer is used to “scalp” moisture to a range of 35% to 70% solids • Removes Water at 1250 btu / #H20 removed. • Fire not issue below 65% solids. • Indirect Dryer uses thermal oil, steam or hot water • Indirect dryer uses little CFM. Little air to treat.
WeCare Thin Film Dryer • Dryer can be run of off natural gas, propane, #2 bunker fuel, landfill gas or digester gas. • Dryer can utilize waste heat off of industry or CHP systems. • Dryer does not require digestion process prior to drying, however digestion may provide renewable energy. • There are more than 80 sludge drying installations with references in Europe, USA, China, Arabia…… • Dryers have been in operation for more than 20 years.
Conclusion • Stop hauling Water. • Higher solids means higher value per ton. • Higher solids means better physical properties. • Higher solids means less secondary processing. • Higher solids means higher organic content. • Higher solids means higher value/revenue.
Thank you • Michael Nicholson • mnicholson@wecareorganics.com • 419-349-5402