1 / 28

Reynolds Stress Constrained Multiscale Large Eddy Simulation for Wall-Bounded Turbulence

Reynolds Stress Constrained Multiscale Large Eddy Simulation for Wall-Bounded Turbulence. Shiyi Chen Yipeng Shi, Zuoli Xiao, Suyang Pei, Jianchun Wang, Yantao Yang State Key Laboratory of Turbulence and Complex Systems

haynesv
Télécharger la présentation

Reynolds Stress Constrained Multiscale Large Eddy Simulation for Wall-Bounded Turbulence

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Reynolds Stress Constrained Multiscale Large Eddy Simulation for Wall-Bounded Turbulence Shiyi Chen Yipeng Shi, Zuoli Xiao, Suyang Pei, Jianchun Wang, Yantao Yang State Key Laboratory of Turbulence and Complex Systems College of Engineering, Peking University and Johns Hopkins University

  2. Question: How can one directly use fundamental physics learnt from our research on turbulence for modeling and simulation? Conservation of energy, helicity, constant energy flux in the inertia range, scalar flux, intermittency exponents, Reynolds stress structures… Through constrained variation principle.. such as decimation theory, renormalized perturbation theory… physical space?

  3. Test of the Constrained-SGS Model • Forced isotropic turbulence: DNS: Direct Numerical Simulation. A statistically steady isotropic turbulence (Re=250) data obtained by Pseudo-spectral method with 5123 resolution. DSM: Dynamic Smagorinsky Model DMM: Dynamic Mixed Similarity Model CDMM: Constrained Dynamic Mixed Model Comparison of the steady state energy spectra. Comparison of PDF of SGS dissipation at grid scale (a posteriori)

  4. Large Eddy Simulation resolution challenge at high Re • Near-wall treatment is key to utility of LES in practice 106 108.5 (Piomelli 2002)

  5. Hybrid RANS/LES

  6. Detached Eddy Simulation S-A Model

  7. DES-Mean Velocity Profile

  8. DES Buffer Layer and Transition Problem Lack of small scale fluctuations in the RANS area is the main shortcoming of hybrid RANS/LES method

  9. Possible Solution to the Transition Problem Hamba (2002, 2006): Overlap method Keating et al. (2004, 2006): synthetic turbulence in the interface

  10. Reynolds Stress Constrained Large Eddy Simulation (RSC-LES) • Solve LES equations in both inner and outer layers, the inner layer flow will have sufficient small scale fluctuations and generate a correct Reynolds Stress at the interface; • Impose the Reynolds stress constraint on the inner layer LES equations such that the inner layer flow has a consistent (or good) mean velocity profile; (constrained variation) • Coarse-Grid everywhere LES Small scare turbulence in the whole space Reynolds Stress Constrained

  11. Control of the mean velocity profile in LES by imposing the Reynolds Stress Constraint LES equations Performance of ensemble average of the LES equations leads to where

  12. Reynolds stress constrained SGS stress model is adopted for the LES of inner layer flow: Decompose the SGS model into two parts: The mean value is solved from the Reynolds stress constraint: • K-epsilon model to solve • Algebra eddy viscosity: Balaras & Benocci (1994) and Balaras et al. (1996) where (3) S-A model (best model so far for separation)

  13. For the fluctuation of SGS stress, a Smagorinsky type model is adopted: The interface to separate the inner and outer layer is located at the beginning point of log-law region, such the Reynolds stress achieves its maximum.

  14. Results of RSC-LES Mean velocity profiles of RSC-LES of turbulent channel flow at different ReT =180 ~ 590

  15. Mean velocity profiles of RSC-LES, non-constrained LES using dynamic Smagorinsky model and DES (ReT=590)

  16. Mean velocity profiles of RSC-LES, non-constrained LES using dynamic Smagorinsky model and DES (ReT=1000)

  17. Mean velocity profiles of RSC-LES, non-constrained LES using dynamic Smagorinsky model and DES (ReT=1500)

  18. Mean velocity profiles of RSC-LES, non-constrained LES using dynamic Smagorinsky model and DES (ReT=2000)

  19. Error in prediction of the skin friction coefficient: (friction law, Dean)

  20. Interface of RSC-LES and DES (ReT=2000)

  21. Velocity fluctuations (r.m.s) of RSC-LES and DNS (ReT=180,395,590). Small flunctuations generated at the near-wall region, which is different from the DES method. RSC-LES DNS(Moser)

  22. Velocity fluctuations (r.m.s) and resolved shear stress:(ReT=2000)

  23. DES streamwise fluctuations in plane parallel to the wall at different positions:(ReT=2000) y+=6 y+=38 y+=200 y+=1000 y+=1500 y+=500

  24. DSM-LES streamwise fluctuations in plane parallel to the wall at different positions:(ReT=2000) y+=6 y+=38 y+=200 y+=1000 y+=1500 y+=500

  25. RSC-LES streamwise fluctuations in plane parallel to the wall at different positions:(ReT=2000) y+=6 y+=38 y+=200 y+=1500 y+=500 y+=1000

  26. Multiscale Simulation of Fluid Turbulence

  27. Conclusions • RSC-LES uses the same grids resolution as DES; • 2. The inner layer flow solved by RSC-LES possesses sufficient small scale fluctuations; • 3. The transition of the mean velocity profile obtained by the RSC-LES from the inner layer to the outer layer at the interface is smooth; • 4. RSC-LES is a simple method and may improve DES, and the forcing scheme… • 5. We have used time averaging scheme for non-uniform systems, RSC-LES works nicely.

More Related