1 / 6

Finding fault(s)

Finding fault(s). How to evaluate whether a fault is present in the subsurface or an area of poor exposure. Abrupt lithologic change Abrupt change in orientation of bedding or foliation In both cases, look for evidence of fault-zone deformation with proximity to contact.

hgriffin
Télécharger la présentation

Finding fault(s)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Finding fault(s) How to evaluate whether a fault is present in the subsurface or an area of poor exposure

  2. Abrupt lithologic change Abrupt change in orientation of bedding or foliation In both cases, look for evidence of fault-zone deformation with proximity to contact Nonconformity - look for evidence such as basal conglomerate Angular unconformity (see above) or Fold (look for lithologic continuity) Fault ….but may be

  3. Use of stratigraphy • Faults can cut out (omit) or stack (repeat) stratigraphic intervals. Stratigraphic omission or repetition can be evident through mapping or drill core.

  4. Sense of slip in the absence of piercing points • Relative ages of hanging wall and footwall materials constrains sense of slip • Metamorphic grade of hanging versus footwall constrains kinematics

  5. Heterogeneity and anisotropy • Fractures typically nucleate on heterogeneities (e.g., fossil) • Low-angle reverse, or thrust, faults localize in mechanically weak layers such as shale and evaporite. They cut across stronger layers in short steps • As long as it is favorably oriented, it is apparently energetically easier to reactivate an existing fault than create a new one

  6. Pattern has meaning • Large-scale fault patterns reflect tectonic environments (plate movements) • Patterns reflect most energetically favorable response to imposed displacement • We will look at overall strains and patterns of faulting in a different order than indicated in syllabus: extensional, transcurrent, then contractional regimes

More Related