1 / 24

AP Topic 15: Electrochemistry

Goes with chapter 21: Silberberg’s Principles of General Chemistry Mrs. Laura Peck, 2013. AP Topic 15: Electrochemistry. Objectives/Study guide. Identify and compare the two types of electrochemical cells: galvanic and electrolytic

hosea
Télécharger la présentation

AP Topic 15: Electrochemistry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Goes with chapter 21: Silberberg’s Principles of General Chemistry Mrs. Laura Peck, 2013 AP Topic 15: Electrochemistry

  2. Objectives/Study guide • Identify and compare the two types of electrochemical cells: galvanic and electrolytic • Draw and label a galvanic cell, including labeling the electrodes, the flow of electrons, and the flow of ions • Write half-reactions and determine which reaction occurs at the anode and which reaction occurs at the cathode. • Give the line notation for a galvanic cell or write a balanced redox reaction from the given line notation. • Calculate the cell potential for a galvanic cell and an electrolytic cell. • Determine if a reaction is spontaneous from its cell potential. • Calculate the cell potential under nonstandard conditions when the solutions are not 1M. This involves the use of the Nernst equation. • Determine the strengths of oxidizing agents and reducing agents. • Draw and label an electrolytic cell. • Determine the reactions which occur at the anode and the cathode during electrolysis. • Perform stoichiometric calculations involving electrolysis.

  3. Basic differences in cells. • Electrochemistry is the study of the interchange of electrical and chemical energy. • There are two types of electrochemical cells, galvanic and electrolytic. • In galvanic cells, spontaneous redox reactions generate electric current. • In electrolytic cells, a nonspontaneous chemical reaction occurs with the application of an electric current.

  4. Line Notation • A galvanic cell can be abbreviated with line notation. • Reactant/product II reactant/product (anode reaction) (cathode reaction) • The salt bridge is indicated by the symbol II Example #1: Give the correct line notation for the Galvanic cell pictured. Zn/Zn2+ II Cu2+/Cu

  5. AP tips: • Here are some mnemonic devices to help you remember some facts about electrochemistry and redox reactions. • ‘LEO’ goes ‘GER’ means Loss of Electrons is Oxidation and Gain of Electrons is Reduction. • To recall what happens at the anode and the cathode: RedCat and AnOx means Reduction Occurs at the cathode and oxidation occurs at the anode. • To know the migration of ions toward the electrodes for both types of cells, ‘Cat’ ions move to the ‘Cat’ode and ‘An’ ions move to the ‘An’ode. • You will be provided with a table of standard reduction potentials on the AP test. • You should be able to sketch a galvanic cell and label the electrodes, the flow of electrons, and the flow of ions.

  6. Standard reduction potentials • The cell potential, Ecell, is the potential of the cell to do work on its surroundings by driving an electric current through a wire. • By definition, a potential of 1 volt is produced when 1 joule of energy moves 1 coulomb of electric charge across a potential. • The magnitude of the cell potential is a measure of the driving force behind an electrochemical reaction. • Sometimes it is referred to as the electromotive force or emf. • Tables of reduction potentials give standard voltages for reduction half-reactions measured at standard conditions of 1 atm, 1 molar solution, and 25*C • The reaction occurring in a galvanic cell can be broken down into an oxidation half-reaction and a reduction half-reaction. • Using the table of standard reduction potentials in your text, you can calculate the cell potential of the overall reaction.

  7. Example #2: consider a galvanic cell based on the reaction: Al + NI2+  Al3+ + Ni Give the balanced cell reaction and calculate the cell potential, E0cell For the reaction. Step 1: Write the oxidation & reduction Half-reactions. Step 2: For the reduction half-reaction Look up the potential in your book. Step 3: For the oxidation half-reaction, E0ox = -E0red Step 4: the cell potential for the overall Reaction is equal to the sum of the Reduction potential, E0red, and the Oxidation potential, E0ox. Step 5: to obtain the balanced cell Reaction, you must make sure that the Electrons lost equal the electrons gained. When multiplying the half-reactions through By a coefficient, do not change the value of E0 Oxidation: Al  Al3+ + 3e- Reduction: Ni2+ + 2e-  Ni Ni2+ + 2e-  Ni E0red = -0.23V Oxidation: Al Al3+ + 3e- E0ox= -E0red  -(-1.66V) = +1.66V E0cell= E0ox + E0red E0cell = -0.23V + 1.66V = 1.43V 3[Ni2+ + 2e-  Ni] E0red = -0.23V 2[Al  Al3+ + 3e-] E0ox = +1.66V 3Ni2+ + 2Al  3Ni + 2Al3+ E0cell = 1.43V

  8. Spontaneous Reactions • Gibbs free energy, ΔG°, can be calculated from the cell potential, E0cell. • ΔG° = -nFE0cell • Faraday’s constant, F, has a value of 96,485 C/mol e- • The number of moles of electrons transferred in a redox reaction is represented by n • A spontaneous reaction is one that has a negative value for ΔG° or a positive value for E0cell • You may be asked if an element or ionic species is capable of reducing another element or ion. • To determine if the reaction will occur, write the half-reactions and calculate the cell potential .

  9. Write half-reactions and Calculate E0cell • Example #3: Will 1M HCl dissolve silver metal and form Ag+ solution? 2H+ + 2e-  2H2 E0red = 0.00V 2Ag  2Ag+ + 2e- E0ox = -0.80V 2H+ + 2Ag  H2 + 2Ag+ E0cell = -0.80V The negative value for E0cell indicates that the reaction will not occur.

  10. Begin by writing the appropriate Half-reactions. Then calculate The cell potential for the overall Reaction. First, the reaction in which Br2 Oxidizes I- Then the reaction in which Br2 Oxidizes Cl- • Example #4: Bromine, Br2, can oxidize iodide, I-, to iodine, I2. However, Br2 cannot oxidize chloride, Cl-, to chlorine, Cl2. Explain why the first reaction occurs yet, the second one does not. Br2 + 2e-  2Br- E0red = 1.09V 2I-  I2 + 2e- E0ox = -0.54V Br2 + 2I-  2Br- + I2 E0cell = 0.55V This reaction occurs, E0cell is + Br2 + 2e-  2Br- E0red = 1.09V 2Cl-  Cl2 + 2e- E0ox = -1.36V Br2 + 2Cl-  2Br- + Cl2 E0cell = -0.27V This reaction does not occur, E0cell is negative

  11. Cell Dependence on Concentration • The galvanic cell represented by the reaction: • 3Ni2+ + 2Al  3Ni + 2Al3+ • Has a cell potential, E0cell, equal to 1.43V under standard conditions (all solutions are 1M) • Increasing the concentration of Ni2+ will shift the reaction to the right by Le Chatelier’s principle, increasing the driving force on the electrons and increasing the cell potential. • The relationship between the cell potential and concentrations at 25°C is given by the Nernst equation: • Ecell = E0cell – (0.0591/n)log Q • The cell potential, Ecell, is for nonstandard conditions. • The moles of electrons transferred are represented by n • The mass action quotient is represented by Q

  12. Example #5: Calculate the cell potential for the reaction: • 3Ni2+ + 2Al  3Ni + 2Al3+ • In which [Al3+] = 2.00M and [Ni2+] = 0.750M • (you already know the E0cell = 1.43V and the number of moles of electrons transferred, n, equals 6) Q = [Al3+]2 / [Ni2+]3 = (2.00)2 / (0.750)3 = 9.48 Ecell = 1.43V – (0.0591/6) log 9.48 = 1.33V

  13. Determining the Strength of Oxidizing and Reducing Agents. • You may be asked to list atoms or ions in order of increasing strength as reducing agents or oxidizing agents. • For a substance to be oxidized, it must lose electrons and another substance must gain electrons because oxidation and reduction always occur together. • The substance that causes another substance to be oxidized is called an oxidizing agent. • An oxidizing agent is reduced; it is the reactant in the reduction half-reaction. • The larger (more positive) E0red, the stronger the oxidizing agent. • A reducing agent is oxidized; it is the reactant in the oxidation half-reaction. • The larger (more positive) the E0ox, the stronger the reducing agent.

  14. Oxidizing: Fe2+<Cu2+<I2<Br2 Reducing: Cl-<Fe2+<Mg • Example #6: classify each of the following as an oxidizing agent, reducing agent, or both. Within each list, arrange in order of increasing strength as oxidizing agents and reducing agents. • Br2, Mg, Fe2+, I2, Cl-, Cu2+ To be an oxidizing agent, a substance must be capable of gaining Electrons or being reduced. Of the species listed, Mg and Cl- are The only ones listed that cannot have a lower oxidation state. For The oxidizing agents listed above, the respective reduction potentials Are -0.44V, 0.16V, or 0.34V for Cu2+ (which can be reduced to Cu0 Or Cu+), 0.54V, and 1.09V. The more positive the cell potential, the Stronger the oxidizing agent. Reducing agents must be capable of being oxidized to a higher Oxidation state. Cl- and Mg can go the Cl0 and Mg2+. Fe2+ can Exist as Fe3+ or Fe0 so it can act as an oxidizing agent or reducing Agent. For the reducing agents listed above, the corresponding Oxidation potentials are -1.36V, -0.77V, + 2.37V. The more positive The cell potential, the stronger the reducing agent.

  15. Electrolytic cells • In an electrolytic cell, a nonspontaneous reaction is made to occur by forcing an electric current through the cell. • In an earlier example, it was shown that the following reaction is spontaneous: • 3Ni2+ + 2Al  3Ni + 2Al3+ • The reverse of this reaction: 3Ni + 2Al3+  3Ni2+ + 2Al is nonspontaneous and can be made to occur by the addition of an external power source. • This electrolytic cell can be set up with two compartments just like the galvanic cell, with the replacement of a power supply for the voltmeter. • In the process of electroplating, the electrolytic cell can also be set up using only one compartment • For example, if an object is to be plated with copper, make it the cathode and immerse it into a copper(II)sulfate solution. • At the cathode, the reaction that will occur and deposit copper onto the object is Cu2+ + 2e-  Cu. • The anode can also be made of copper. • The oxidation of copper occurs at this anode.

  16. Reactions that occur in an electrolytic cell • To determine which reaction occurs at the anode and the cathode during electrolysis, you must consider all possible reactions and their reduction and oxidation potentials. • If the reaction takes place in an aqueous solution, the oxidation and reduction of water must be considered.

  17. Example #7: A solution of copper(II)sulfate is electrolyzed. Calculate the cell potential of the reaction, E0cell. possible reactions Cell potential, Eo(V) Cathode Cu2+ + 2e-  Cu 0.34 SO42- + 4H+ + 2e-  H2SO3 + H2O 0.20 2H2O + 2e-  H2 + 2OH- -0.83 anode Cu  Cu2+ + 2e- -0.34 2H2O  O2 + 4H+ + 4e- -1.23 For each electrode, the reaction with the more positive potential Will occur. At the cathode, Cu2+ will be reduced. At the anode, Cu Will be oxidized. Cu2+ + 2e-  Cu Cu  Cu2+ +2e-

  18. AP Tip • Frequently, the electrodes are inert for electrolysis. • For example, during the electrolysis of KI(aq) - K+, I-, and H2O are the only species present. • Only I- and H2O are present to be oxidized at the anode. • Note: In aqueous KI, there is no K(s) to be oxidized.

  19. Stoichiometry of electrolytic processes. • Lets review how much chemical change occurs with the flow of a given current for a specified time. • You might be asked how much metal was plated (formed) or how long an electroplating process will take or how much current is required to produce a specified amount of metal over a period of time. • Some units to be familiar with include A, amperes; 1A = 1C/s; coulombs, C; Faraday’s constant is 96,4895 C = 1mol e-

  20. Example #8: A current of 10.0A is passed through a solution containing M2+ for 30.0 min. It produces 5.94 g of metal, M. Determine the identity of metal, M. 10.0A = 10.0C/s x 30.0 min x 60 s/min = 1.80x104 C 1.80x104 C x 1 mol e- /96,485C x 1 mol M/2 mol e- = 9.33x10-2 mol M Molar mass of M = g M/mol M = 5.94gM / 9.33x10-2 mol M = 63.7g/mol 63.7 g/mol is the molar mass of Cu. You can also do this is one step 5.94g M x 2 mol e- x 96485C x 1 s x 1 min x 1 = 63.7g/mol 1 mol M 10.0C mole e- 60 s 30.0 min

  21. Comparison of Galvanic and Electrolytic cells • Galvanic and electrolytic cells have few features in common. • For both types of cells, reduction always occurs at the cathode and oxidation at the anode. • In an electrolytic cell, electrons travel from the battery to the cathode. • In both cases, electrons travel in the wire, but you wouldn’t say the electrons travel from the anode to the cathode in an electrolytic cell. • Positive ions are always attracted to the cathode whether the cell is electrolytic or galvanic.

  22. Comparison cont… In both types of cells, the + ions or cations move toward the cathode Because there is an excess of negative ions at the cathode caused by The reduction of + ions in solution. Likewise, oxidation at the anode produces + ions, so negative ions or anions in the salt bridge must move to the anode to maintain electrical Neutrality.

  23. The end…

More Related