1 / 30

Implementing Spanning Tree

Spanning Tree Protocol Enhancements. Implementing Spanning Tree. STP Standards. 802.1D-1998: The legacy standard for bridging and STP. CST: Assumes one spanning-tree instance for the entire bridged network, regardless of the number of VLANs.

iliana-briggs
Télécharger la présentation

Implementing Spanning Tree

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Spanning Tree Protocol Enhancements Implementing Spanning Tree

  2. STP Standards • 802.1D-1998: The legacy standard for bridging and STP. • CST: Assumes one spanning-tree instance for the entire bridged network, regardless of the number of VLANs. • PVST+: A Cisco enhancement of STP that provides a separate 802.1D spanning-tree instance for each VLAN configured in the network. • 802.1D-2004: An updated bridging and STP standard. • 802.1s (MST): Maps multiple VLANs into the same spanning-tree instance. • 802.1w (RSTP): Improves convergence over 1998 STP by adding roles to ports and enhancing BPDU exchanges. • PVRST+: A Cisco enhancement of RSTP using PVST+.

  3. Comparison of Spanning-Tree Protocols

  4. About STP

  5. About STP (Cont.)

  6. Spanning-Tree Cost and Priority • Cost determines root port determination. • For ports with equal costs, priority is used.

  7. Default Spanning-Tree Configuration • Cisco Catalyst switches support three types of spanning tree: • PVST+ – Cisco default. • PVRST+. • MSTP. • Default spanning-tree configuration: • PVST+. • A separate STP instance for each VLAN. • Same switch is root bridge for all VLANs. • No load sharing between links.

  8. PVRST+ Configuration • Enable PVRST+ globally. • Should be configured on all switches in the broadcast domain. • Configure a switch as the root bridge for each VLAN. • Configure a switch as the secondary root bridge for each VLAN. • Load sharing on uplinks.

  9. PVRST+ Configuration (Cont.) • In this example scenario, bridge priority, cost, and priority are manipulated.

  10. RSTP Port Roles • Ports in forwarding mode: • Root: chosen path to root bridge • Designated: port that sends the best BPDU on the segment to which it is connected • Ports in blocking mode: • Alternate: receives more useful BPDUs from another bridge • Backup: receives more useful BPDUs from the same bridge

  11. Spanning-Tree Port Types and States

  12. RSTP State Transitions • Standard spanning-tree state transitions: • Standard spanning tree has no mechanism to determine when network has converged, blocking all transmissions for twice the forward delay.

  13. RSTP State Transitions (Cont.) • RSTP state transitions: • Because RSTP relies on local negotiations, transition occurs as soon as the negotiation is completed.

  14. RSTP Proposal-Agreement Sequence • Ports negotiate locally as soon as different BPDUs are received. • Transition occurs as soon as negotiation is completed. • Negotiation is then immediately started on other ports.

  15. RSTP Link Types

  16. RSTP Edge Ports • Will never have a switch connected to it • Immediately transitions to forwarding • Functions similarly to PortFast • Is configured with spanning-tree portfast command

  17. PortFast Configuration • Configure PortFast on edge ports connected to nonswitch devices. • Ports transition directly to forwarding, bypassing listening and learning states of spanning tree. • Configures PortFast on an interface. • Use trunk parameter for trunk interfaces with no switches connected (e.g., routers or servers with trunks).

  18. Bridge Priority with Extended System ID • Only four high-order bits of the 16-bit Bridge Priority field carry actual priority. • Therefore, priority can be incremented only in steps of 4096, onto which will be added the VLAN number. • Example: For VLAN 11: If the priority is left at default, the 16-bit Priority field will hold 32768 + 11 = 32779. Priority Values (Hex)Priority Values (Dec) 0 0 1 4096 2 8192 . . 8 (default) 32768 . . F 61440

  19. Verifying PVRST+

  20. Verifying PVRST+ (Cont.)

  21. Introducing MSTP • In some scenarios, many VLANs are spanning several switches. • PVRST+ would need six instances. • Grouping instances simplifies the tree structure.

  22. MST Regions • MST configuration on each switch: • Name • Revision number • VLAN association table

  23. Extended System ID in Bridge ID Field

  24. Implementing MST

  25. Implementing MST (Cont.)

  26. Implementing MST (Cont.)

  27. Verifying MSTP • Displays MSTP configuration switch# show spanning-tree mst configuration • switch# show spanning-tree mst configuration • Name [XYZ] • Revision 1 Instances configured 2 • Instance Vlans mapped • -------- -------------------------------------------------------- • 0 1-10,13-20,23-30,34-4094 • 11,21,31 • 12,22,32 • ------------------------------------------------------------------

  28. Verifying MSTP (Cont.) • Displays configuration information for a specific MSTP instance switch# show spanning-tree mst instance_number switch# show spanning-tree mst 1 ##### MST1 vlans mapped: 11,21,31 Bridge address 001a.e372.ab00 priority 24577 (24576 sysid 1) Root this switch for MST1 Interface Role Sts Cost Prio.Nbr Type --------------- ---- --- --------- -------- ------------------------ Fa0/1 Mstr FWD 200000 128.1 P2p Fa0/8 Desg FWD 200000 128.9 P2p • Forces renegotiation with neighboring switches during migration process switch# clear spanning-tree detected-protocols [interface interface-id]

  29. Summary • Enhancements now enable STP to converge more quickly and run more efficiently. • RSTP provides faster convergence than 802.1D STP when topology changes occur. • RSTP configuration includes enabling RSTP and designing the root and secondary root bridges. • RSTP allows several additional port roles to increase the efficiency of the overall mechanism. • show spanning-tree is the main family of commands used to verify RSTP operations. • MSTP reduces the encumbrance of PVST by allowing a single instance of spanning tree to run for multiple VLANs. • MSTP BPDUs carry the MST instance number in the extended system ID field.

More Related