1 / 26

Sampling Inspection

Sampling Inspection. Inspection ’ s role and type. Although the modern QM emphasizes the principle of prevention in advance, sampling inspection has still its special role, especially in inspecting the quality of raw material , WIP and finished goods. Inspection: a. no inspection

illiana-mclaughlin
Télécharger la présentation

Sampling Inspection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sampling Inspection

  2. Inspection’s role and type • Although the modern QM emphasizes the principle of prevention in advance, sampling inspection has still its special role, especially in inspecting the quality of raw material, WIP and finished goods. • Inspection: a. no inspection b. Acceptance sampling c. 100% inspection

  3. When touseacceptance sampling? • When testing is destructive. • When the cost of 100% inspection is high. • When 100% inspection is not technologically feasible or would require so much calendar time and/or expenses. • When there are many items to be inspected and the inspection error rate is high. • When the vendor has an excellent quality history, and some reduction in inspection from 100% is desired. • When there are potentially serious product liability risks.

  4. Acceptance Sampling • Purposes • Determine quality level • Ensure quality is within predetermined level

  5. Advantages of Acceptance Sampling • Less expensive because of less inspection. • There is less handling damage of the product. • It is applicable to destructive testing. • Fewer personnel are involved in inspection activities. • It often greatly reduces the amount of inspection error. • The rejection of entire lots often provides a stronger motivation to the vendor for quality improvement.

  6. Disadvantages of Acceptance Sampling • Risks of accepting ”bad” lots and rejecting “good” lots. In the “good” lot, there might be nonconformities. • Sample provides less information than 100-percent inspection • Acceptance sampling requires more time on planning and documentation of the acceptance sampling procedure.

  7. Data Type • Attribute Data：Only conformity and nonconformity • Variable Data ：length,widthetc. -- Liberman, G. J., and G. J. Resnikiff(1955).”Sampling plans for Inspection by variables”Journal of Quality Technology, Vol. 29, No.2.

  8. Types of Acceptance sampling Plans Single-sampling plan Double-sampling plan Multiple-sampling plan Sequential-sampling plan

  9. (N, p) Single-sampling plan Total number ：N The proportion of defects :P Acc the lot Sn≦C (n,c) Reject the lot Sn>C Where Sn is the number of the actual defects in the sample.

  10. Acc the lot Acc the lot S(n1+n2) ≦c2 Sn1≦c1 c1<Sn1<r1 (n,c1 ,r1) (N, p) (n1+n2, c2) Reject the lot S(n1+n2) >c2 Sn1>c1 Reject the lot Double-sampling plan

  11. Acc the lot Acc the lot S(n1+n2)<r2 Sn1≦c1 c2<S(n1+n2)<r2 (n1+n2+n3) c1<Sn1<r1 (n,p) (n1+n2) S(n1+n2)≧r2 Sn1>c1 Reject the lot Reject the lot Multiple-sampling plan ……..

  12. Sequential Sampling Plan

  13. Risk • Acceptable Quality Level (AQL) • Max. acceptable percentage of defectives agreed by the producer and user. • a (Producer’s risk) • The probability of rejecting a good lot. • Lot Tolerance Percent Defective (LTPD) • Percentage of defectives that defines consumer’s rejection point. •  (Consumer’s risk) • The probability of accepting a bad lot.

  14. Decision Law

  15. Operating Characteristic (OC) Curve • Probability of acceptance for the lot to be inspected under different percentage of defectives. OC (p)=Pr(Accept the lot |p) ≡P (Sn ≦C |p)

  16. OC Curve

  17. Operating Characteristic Curve 1 0.9 a = .05 (producer’s risk) 0.8 0.7 n = 99 c = 4 0.6 0.5 Probability of acceptance 0.4 =.17 (consumer’s risk) 0.3 0.2 0.1 0 1 2 3 4 5 6 7 8 9 10 11 12 LTPD AQL Percent defective

  18. Example: AQL=1 % LQL=6 % OC (1%)=0.95 OC(6 %)=0.10 (n,c)=(89, 2)

  19. OC-Curve’s calculation for attribute data Type A (Hyper-Geometric approach)： Type B (Binomial approach)： Type C (Poisson approach)：

  20. （n ,c）’s effect on OC-Curve

  21. Acceptance Sampling: Single Sampling Plan A simple goal Determine (1) how many units, n, to sample from a lot, and (2) the maximum number of defective items, c, that can be found in the sample before the lot is rejected.

  22. Example: Acceptance Sampling Problem Zypercom, a manufacturer of video interfaces, purchases printed wiring boards from an outside vender, Procard. Procard has set an acceptable quality level of 1% and accepts a 5% risk of rejecting lots at or below this level. Zypercom considers lots with 3% defectives to be unacceptable and will assume a 10% risk of accepting a defective lot. Develop a sampling plan for Zypercom and determine a rule to be followed by the receiving inspection personnel.

  23. Example: Step 1. What is given and what is not? In this problem, AQL is given to be 0.01 and LTDP is given to be 0.03. We are also given an alpha of 0.05 and a beta of 0.10. What you need to determine your sampling plan is “c” and “n.”

  24. Exhibit TN 7.10 c LTPD/AQL n AQL c LTPD/AQL n AQL 0 44.890 0.052 5 3.549 2.613 1 10.946 0.355 6 3.206 3.286 2 6.509 0.818 7 2.957 3.981 3 4.890 1.366 8 2.768 4.695 4 4.057 1.970 9 2.618 5.426 Example: Step 2. Determine “c” First divide LTPD by AQL. Then find the value for “c” by selecting the value in the TN7.10 “n(AQL)”column that is equal to or just greater than the ratio above. So, c = 6.

  25. Example: Step 3. Determine Sample Size Now given the information below, compute the sample size in units to generate your sampling plan. c = 6, from Table n (AQL) = 3.286, from Table AQL = .01, given in problem n(AQL/AQL) = 3.286/.01 = 328.6, or 329 (always round up) Sampling Plan: Take a random sample of 329 units from a lot. Reject the lot if more than 6 units are defective.

More Related