1 / 8

Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)

Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [development of digital modulation system for 60GHz wireless signal evaluation] Date Submitted: [ 16 March, 2005] Source: [Hiroyuki Nakase, and Hiroshi Oguma]

iola-reeves
Télécharger la présentation

Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [development of digital modulation system for 60GHz wireless signal evaluation] Date Submitted: [16 March, 2005] Source: [Hiroyuki Nakase, and Hiroshi Oguma] Company [Research Institute of Electrical Communication, Tohoku University] Address [Katahira, Sendai, 980-8577, Japan] Voice:[+81.22.217.5531], FAX: [+81.22.217.5533], E-Mail:[nakase@riec.tohoku.ac.jp ] Re: [] Abstract:[Description of equipments for evaluation of 60Ghz digital communication] Purpose: [Contribution to mmW SG3c at March 2005 meeting.] Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15. Hiroyuki Nakase, Tohoku Univ.

  2. How to evaluate 60Ghz signals? • Design for multi-user wireless system • Measurement of delay profile • BER/FER evaluation using several modulation scheme • Device evaluation using modulation signal, not CW • Generator and evaluation equipment for 60Ghz band Hiroyuki Nakase, Tohoku Univ.

  3. Oscilloscope: TDS 7154 (Tektronix, 1.5GHz (20GSample/s)) Arbitrary Waveform Gen.: AWG520 (Tektronix, 1GHz/Sample x2ch, 10bit×4M word) Vector Signal Generator: Agilent ESG E8267C (low phase noise, 1GHz I/Q, freq.~20GHz) Local Source: Agilent PSG E8247C (20GHz) with mmWave Source Agilent 83557A (V band) Up Converter/Down Converter: Baseband design and demodulation: Advanced Design System(Agielnt technologies) Antenna: Horn type(23dBi), Omni antenna (6dBi) Hiroyuki Nakase, Tohoku Univ.

  4. LAN Tek AWG520 1GHz clock LAN Tek TDS7154 20Gs/s I,Q 2ch PSG E8267 IF 5GHz PSG E8257D PSG E8257D LO/4 Control line Control line LO/4 mmWave Source 83577A Down- Converter 61GHz mmWave Source 83577A Up-Converter 61GHz 1. Generate baseband waveform data using ADS. 2. Send the data to AWG520 using LAN 3. Generate5.1GHz modulated IF signal using E8267, and transmit up-converted 61GHz. 4. Down-convert received signal to 1GHz band. 5. Sampling using Oscilloscope TDS7154, and send to ADS using LAN Hiroyuki Nakase, Tohoku Univ.

  5. Example : generation of modulation signalOFDM (832 carrier, 225MHz BW) Hiroyuki Nakase, Tohoku Univ.

  6. Example : BER evaluation Hiroyuki Nakase, Tohoku Univ.

  7. Example : EVM evaluation Hiroyuki Nakase, Tohoku Univ.

  8. Spectrum and EVM measurementBasic characteristics of the system TX and RX are connected using wire Measured EVM : 3.967% Hiroyuki Nakase, Tohoku Univ.

More Related