1 / 15

EE 345S Real-Time Digital Signal Processing Lab Fall 2008

EE 345S Real-Time Digital Signal Processing Lab Fall 2008. Lab #3 Generating a Sine Wave Using the Hardware & Software Tools for the TI TMS320C6713 DSP (Continued) Wael Barakat. Outline. Outputting Using Direct Memory Access (DMA) Sine Wave Generation Using Difference Equation. DMA.

ivy-cervantes
Télécharger la présentation

EE 345S Real-Time Digital Signal Processing Lab Fall 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EE 345S Real-Time Digital Signal Processing LabFall 2008 Lab #3Generating a Sine Wave Using the Hardware & Software Tools for the TI TMS320C6713 DSP (Continued)Wael Barakat

  2. Outline • Outputting Using Direct Memory Access (DMA) • Sine Wave Generation Using Difference Equation

  3. DMA • In polling and interrupts methods, usage of sin(.) function repeatedly consumes CPU cycles, which is computationally inefficient. • Solution: Use EDMA capabilities of the C6713 to read samples from a pre-computed table and load them into a McBSP DXR for transmission to a codec.

  4. EDMA • Idea is that, with EDMA, CPU can initiate data transfer and do other operations while transfer is in progress. • More efficient than using regular I/O which keeps CPU occupied during entire transfer. • EDMA controller: • Handles all data transfers between L2 cache and peripherals. • Can move data to and from any addressable memory spaces (internal memory, external memory and peripherals) independently of CPU operations.

  5. EDMA Features • Has 16 channels that can be assigned priorities. • Data transfers can be initiated by CPU or events. • Transfers can be 8-bit bytes, 16-bit half-words, or 32-bit words. • Can transfer 2-dimensional data blocks. • When an event occurs its transfer parameters are read from the Parameters RAM (PaRAM) and then sent to the address generation hardware.

  6. EDMA Features • After an element transfer, addresses at source/destination can stay the same, get incremented or decremented. • After a programmed transfer, EDMA can continue transfers by linking to another transfer programmed in the PaRAM for same channel, or chaining to a transfer for another channel • Can generate transfer completion interrupts to the CPU along with a transfer complete code, for it to take desired action based on that code. • EDMA has a Quick DMA mode (QDMA) for quick, one-time transfers.

  7. DMA • Each of the 16 channels has a default event (on peripheral devices) associated with it which triggers the data transfer. • User can change mapping by modifying EDMA Event Select registers ESEL0, ESEL1 and ESEL3.

  8. DMA • Event Processing Registers: • Event Register (ER): when event n occurs, bit n of ER is set. • Event Enable Register (EER): setting bit n of EER enables processing of that event. • Event Clear Register (ECR): setting a bit in ECR clears corresponding bit in ER, used by CPU to clear event flags. • Event Set Register (ESR): setting a bit in ESR sets corresponding bit in ER, used by CPU to submit event requests and for debugging.

  9. DMA • Parameter RAM (PaRAM): • Transfer parameter table for EDMA channels is stored in PaRAM. • It is a 2KB block of RAM located within EDMA. • Table consists of 24 bytes that contain all information about a transfer.

  10. DMA • The OPT field: • Sets the priority, • Sets the element size: 8, 16, or 32 bits, • Defines sources as 1- or 2-dimensional, • Enables/disables transfer complete interrupt, • Defines transfer complete code, • Sets source/destination address update modes.

  11. DMA • A 1-D block transfer consists of FRMCNT+1 frames. • Each frame consists of ELECNT elements. • Type 1 Transfer, if FS=0 in OPT field (sync event occurs, for example transition of McBSP XRDY flag from FALSE to TRUE for example) • A frame element is transferred from source to destination. • S/D Addresses are updated in parameter set after transfer. • ELECNT decremented by 1.

  12. DMA • When ELECNT reaches 1, i.e. final element in frame, • Element is transferred, • ELECNT is reloaded with value in ELERLD. • FRMCNT is decremented by 1. • EDMA continues to transfer data at sync events until no more frames are available. • Type 2 Transfer, if FS=1 in OPT field, each sync event causes all elements of a frame to be transferred as rapidly as possible.

  13. DMA • Linking EDMA Transfers: • When LINK bit of OPT is 0, EDMA stops after a transfer is complete. • If LINK=1 and transfer is completed, • Transfer parameters are reloaded with parameter set pointed to by 16-bit address located in LINK field. • EDMA continues with transfer of new set.

  14. DMA • EDMA Interrupts to CPU • If Transfer Complete Interrupt (TCINT) bit is set to 1 in OPT field for a channel and event mapped to that channel occurs, EDMA will set a bit in Channel Interrupt Pending Register (CIPR). • Then, if bit corresponding to channel in Channel Interrupt Enable Register (CIER) is set, EDMA generates EDMA_INT interrupt to CPU. • If EDMA_INT is enabled in IER, program execution will jump to ISR.

  15. Sine Wave Generation • Difference Equation: • Input x[n] is an impulse. • Output y[n] are cosine/sine values. • IC’s are all zero. • Computation: 2 multiplications and 3 or 2 additions • Memory Usage: 2 coefficients, 2 previous values of y[n] and 1 previous value of x[n] • Drawback is the build-up of error due to feedback sin(0n).u[n] ↔ y[n] = 2.cos(0).y[n-1] - y[n-2] - sin(0).x[n-1]

More Related