1 / 10

RAD 254 Chapter 15 Radiographic Technique

RAD 254 Chapter 15 Radiographic Technique. 4 primary exposure factors are: kVp, mA, time, distance. In the next 10 minutes:. Write down “bullets” about what happens when one raises kVp. Memory jerk for grids. Write the following: 5 2 8 4 12 5 16 6. Now what???. kVp.

jalia
Télécharger la présentation

RAD 254 Chapter 15 Radiographic Technique

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RAD 254 Chapter 15Radiographic Technique 4 primary exposure factors are: kVp, mA, time, distance

  2. In the next 10 minutes: • Write down “bullets” about what happens when one raises kVp

  3. Memory jerk for grids • Write the following: • 5 2 • 8 4 • 12 5 • 16 6

  4. Now what???

  5. kVp • Beam quality • Primarily responsible for quality, BUT increases in kVp also make x-ray production slightly more productive • Penetrability • Beam intensity • HVL • Biggest exposure factor affecting CONTRAST

  6. mA • Directly responsible for amount of radiation produced (Quantity) As mA is doubled, so is the number of photons produced and so is PATIENT DOSE • mA stations also are responsible for focal spot size selection

  7. Time • Exposure times should be practical and short enough to stop patient motion but the shortest times also result in the most radiation output per unit of time – thus more wear and tear on the x-ray tube • mAs = time X mA • mAs is only measured by tube current • Responsible for Optical Density (OD)

  8. Distance (SID) • The most forgotten exposure factor but perhaps the most important • Inverse square law • Primarily affects Optical Density (OD) • No affect on quality • Other distance related terms: • FFD, FOD, OFD, FRD, ORD, SSD • Other geometric factors (focal spot size, patient size, part orientation to CR and film)

  9. Filtration • Inherent (.5 mm al equiv) • Added (2.0 which may also include some filtration from localizer light apparatus, etc) • Total filtration: inherent + added (2.5 mm al equivalent)

  10. Generators • Half wave (120 cycles/sec = 60 impulses per second) – 100% ripple • “self rectified” is also a half wave unit where the X-RAY TUBE is the rectifier (no diodes) • Full wave rectification (120 cycles per second = 120 impulses per second) – 100% ripple • 3 phase, 6 pulse = 14% ripple (33% more radiation produced per exposure over full wave) • 3 phase, 12 pulse = 4% ripple (40% more radiation produced per exposure over full wave) • Hi frequency = <1% ripple

More Related