1 / 4

Capacitance Measurements

Capacitance Measurements. Using the Digital Multimeter. Capacitor Marking. Polyester Capacitors use a 3 digit code + letter. Marked in pF 1 st digit is the 1 st number in the value 2 nd digit is the 2 nd number in the value 3 rd digit is the multiplier power of 10

jana-underwood
Télécharger la présentation

Capacitance Measurements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Capacitance Measurements Using the Digital Multimeter

  2. Capacitor Marking Polyester Capacitors use a 3 digit code + letter. • Marked in pF • 1st digit is the 1st number in the value • 2nd digit is the 2nd number in the value • 3rd digit is the multiplier power of 10 • Think of this as the number of zeros in the value • The last letter is the torerance • J = ± 5%, K = ± 10%, M = ± 20% • There may be manufacturer’s codes before the 3 digit value code (2A in the top photo) Electrolytic Capacitors are marked on the body • The value and voltage are marked • the – bar indicates the negative lead, which must be connected to a point lower in voltage than the other lead on the capacitor.

  3. Capacitor value measurement • Insert the capacitor leads into the Cx slots in the meter (yellow arrow). Many capacitor leads may not properly reach the internal meter terminals. Use the adapter (green arrow) that provides a better connection to the meter. (bottom right photo). • Take care. The adaptor tends to come apart. When it does, the metal prongs in the adapter fall out – they are not glued in place. The adapter can be reassembled. • Set the meter switch to somewhere in the F (Farad) range (red arrow).

  4. Range Selection • Adjust the range for best accuracy without overflow. • n = nanoFarads (10-9F) • μ = microFarads (10-6F)

More Related