1. Tool Identification By: Johnny M. Jessup Agriculture Instructor/FFA Advisor

2. Adjustable Wrench • Turning various size nuts and bolts.

3. Allen Wrench • Turning hex head socket screws.

4. Aviation Snips • Cutting sheet metal.

5. Ball Pein Hammer • Hammering metal.

6. Bar Clamp • Clamping large sections of wood together.

7. Bent Nose Pliers • Reaching obstructive or awkward places.

8. Bolt Cutters • Cutting bolts & steel rods.

9. Bolt Die • Cutting threads on bolts and rods.

10. Bolt Die Stock • Holder for bolt tie.

11. Bolt Tap • Cutting inside threads.

12. Box End Wrench • Turning hex head nuts and bolts.

13. Brick Jointer • Smoothing and designing masonry joints.

14. Brick Trowel • Placing and spreading mortar.

15. Bulb Planter • Planting and transplanting bulbs.

16. Bush Axe • Cutting bushes and under growth.

17. Butt Hinge • Hinge for narrow fencing.

18. C Clamp • Clamping two or more pieces of metal together.

19. Carriage Bolt • Bolting wood to wood or wood to metal.

20. Castrator • Tool for sterilizing male animals.

21. Center Punch • Starting holes in metal.

22. Chain Saw File • Sharpening chain saw file.

23. Chalk Line Reel • Making straight lines.

24. Chipping Hammer • Removing slag from welds.

25. Circuit Breaker • Protection from overload in electrical circuits.

26. Circular Carbide Saw Blade • Blade used on portable electric saw.

27. Cold Chisel • Cutting metal.

28. Combination Oil Stone • For sharpening and honing cutting tools.

29. Combination Square • Determining 45o and 90o angles.

30. Combination Wrench • Turning hex and square nuts and bolts.

31. Common Nail • Nailing boards together where holding power is desired.

32. Compass • Drawing circles.

33. Compass Saw • Cutting wood in close places.

34. Concrete Finishing Trowel • Smoothing concrete.

35. Concrete Float • Leveling concrete.

36. Coping Saw • Cutting curves and irregular cuts.

37. Cordless Drill • Drilling holes with a tool that uses a battery pack.

38. Countersink • Flaring top of hole for recessing head for flathead screw or bolt.

39. Cutting Torch • Cutting metal with heat.

40. Deep Socket • Turning nuts and bolts in depressed areas.

41. Dehorner • Removing horns from cattle.

42. Diagonal Cutting Pliers • Surface and diagonal wire cutting.

43. Drift Punch • Aligning holes.

44. Drill Press Vise • Holding stock while drilling.

45. Duplex Receptacle • To plug electrical units.

46. Dust Mask • Protects the respiratory system from airborne particles.

47. Ear Tagger • Labels individual animals for identification.

48. Electrical Multimeter • Performs various tests on electrical circuits.

49. Emery Dresser • Smoothing face of grinding wheel.

50. End Cutting Nippers • Cutting ends of wire, nails and small bolts.