1 / 19

THE COOLING SYSTEM

THE COOLING SYSTEM. Purpose. To regulate the engines internal temperature To remove excess heat from the engine To provide heat to the passenger compartment. The Water Pump. Centrifugal-type, rotates faster than crank, up to 10,000 gal. per hour

jerry-massey
Télécharger la présentation

THE COOLING SYSTEM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. THE COOLING SYSTEM

  2. Purpose • To regulate the engines internal temperature • To remove excess heat from the engine • To provide heat to the passenger compartment

  3. The Water Pump • Centrifugal-type, rotates faster than crank, up to 10,000 gal. per hour • Pulley driven, belt, chain drive or direct drive

  4. The Cooling Fan • Provides air flow with vehicle stopped • Provides increased air flow at low RPM or vehicle speeds • Belt driven or Electric

  5. Belt Driven Cooling Fan Clutch • Limits actual fan speed no more than 2000 rpm • Engaged at low speeds • Disengaged at high speeds • Thermostatic (temp. sensitive)

  6. Flex Blade Fan • Fan blades flatten out at high speeds, reducing noise, increasing horse power

  7. Electric Cooling Fan • Electric – 12v DC motor driven fan • Controlled in several ways • Engine coolant temp (ECT) switch • A/C select switch • PCM controlled based on various inputs • Fan turns on/off at specific temps.

  8. Electro-Viscous Fan Clutch • PCM Controlled fan speed • Sensors monitored to control speed: • ECT, A/C request, VSS, IAT, Trans Fluid Temp, AAT • Solenoid controls fluid flow, regulating fan speed • Internal hall effect sensor monitors fan speed

  9. The Radiator • Transfers heat from coolant to the atmosphere • Two types – Vertical & cross flow • Aluminum, brass, copper core; brass, copper or plastic tanks • Air movement through radiator created by a mechanical fan or by vehicle movement (ram air) dissipates heat

  10. How a Radiator Works

  11. Radiator Pressure Cap • Regulates pressure in the cooling system • Rated in psi – always replace with same rating • Pressure valve – allows liquid or vapor to escape • Vacuum valve – as system cools, coolant can reenter the system

  12. The Thermostat • Regulates engine coolant temperature • Rated in degrees – 195 degrees most common • Solid Expansion design – wax pellet expands as temp increases, valve begins opening at rating & is completely open within 20 degrees

  13. Coolant • Provides freeze & boil over protection, corrosion prevention & good heat transfer • Ethylene Glycol based – recommended 50/50 mixture with water, poisonous • Dex-Cool – used by GM, 5 year 150,000 mile protection, doesn’t contain silicate & phosphate additives

  14. The Heater Core • Small size radiator located in the dash, coolant circulates through it. A blower motor passes fresh air over it, heat transfers to the cooler air and into the cabin • Many vans & SUV have rear heating units

  15. OLD NEW

  16. Overview

More Related