1 / 61

Matter: Properties and Changes

Matter: Properties and Changes. Chapter 3 Chapter 15.1, 15.3 Chapter 12.4. Chapter Objectives. Distinguish between physical and chemical changes Define and classify matter by composition Define properties of liquids, solids, and gasses

Télécharger la présentation

Matter: Properties and Changes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Matter: Properties and Changes Chapter 3 Chapter 15.1, 15.3 Chapter 12.4

  2. Chapter Objectives • Distinguish between physical and chemical changes • Define and classify matter by composition • Define properties of liquids, solids, and gasses • Identify observable characteristics of a chemical reaction • Explain and apply the fundamental law of conservation of mass

  3. Vocabulary – Ch. 3.1 – 3.2 • Physical property • Extensive property • Intensive property • Chemical property • States of matter • Solid • Liquid • Gas • Vapor • Physical Change • Chemical Change • Law of Conservation of Mass • Phase Change

  4. Vocabulary – Chapter 15.1, 15.3 • Energy • Heat • Joule • Specific Heat • Specific Heat Equation (q = mC∆T) • Heat of Vaporization (∆Hvap) • Heat of Fusion (∆Hfus) • Heating Curve

  5. Vocabulary – Ch. 12.1, 12.4 • Pressure • Barometer • Atmosphere • Melting Point • Vaporization • Evaporation • Vapor Pressure • Boiling Point • Sublimation • Freezing point • Condensation • Deposition • Phase diagram • Triple Point

  6. Ch. 3.1 - What is Matter?? • Matter as defined from Ch. 1 is: • Anything that takes up space and has mass • Mass – measure of the amount of matter in an object.

  7. What is a Pure Substance? • Matter that has a uniform and unchanging composition • Table salt is ALWAYS Sodium Chloride • Water is always made of 2 Hydrogen atoms and 1 Oxygen atom • Is seawater a substance?

  8. Properties of Matter • Chemistry is the study of matter. • Matter is classified according to its physical and chemical properties. • Physical Properties: Can be observed without changing the identity of substance.

  9. Some Physical Properties • State at Room temp (liquid, solid or gas) • Melting point • Boiling Point • Viscosity (resistance to flow) • Density • Color • Odor • Brittle/ductile • Electrical/thermal conductivity

  10. Physical Properties • Intensive Properties – Independent of amount of material. They property is the same no matter how much is there. • Example: Density • Extensive Properties – Dependent of the amount of material present. • Example: Length, mass, volume

  11. Properties of Matter • Chemical Properties: the ability to combine or change into other substances. • Examples: flammability, oxidation, rotting

  12. States of Matter • State of Matter: Its physical form. • There are three physical states: Solid: • Definite shape • Definite volume • Closely packed particles

  13. States of Matter Liquid: • particles move past each other (flow) • definite volume • takes the shape of its container (indefinite)

  14. States of Matter Gas: • flows • takes the shape of its container (indefinite shape) • Fills the container completely. (indefinite volume) • Note: A vapor refers to a gaseous state of a substance that is a solid or liquid at room temperature.

  15. Physical or Chemical Property? • Bending of aluminum • Salt dissolving in water • Magnesium burning in air • Baking soda is a white powder • Fluorine is a highly reactive element

  16. Ch. 3.2 - Changes in Matter • Physical changes are those which alter the substance without altering its composition. • Change of phase  one physical state to another Melting of ice - composition unchanged, i.e. ice is water in solid form (H2O) They generally require energy, the ability to absorb or release heat (or work).

  17. Phase Changes (Ch. 12.4) • What are the phase changes of water? 1. Melting – changing of a solid to a liquid (heat of fusion = ∆Hf) 2. Vaporization – changing from a liquid to a gas (heat of vaporization = ∆Hvap) 3. Sublimation – Changing from a solid to a gas (heat of sublimation = ∆Hsub) What do these processes have in common?

  18. Phase Changes • Phase changes in the opposite direction have names too. • liquid to a solid: • gas to a liquid: • gas to a solid: What do these have in common? Answer:

  19. James Joule 1818-1889 UNITS OF ENERGY 1 calorie = heat required to raise temp. of 1.00 g of H2O by 1.0 oC. 1000 cal = 1 kilocalorie = 1 kcal 1 kcal = 1 Calorie (a food “calorie”) But we use the unit called the JOULE 1 cal = 4.184 joules (exactly)

  20. Heats of Fusion & Vaporization • Heat of Fusion (∆Hfus) – The amount of heat (in joules) needed to melt 1 g of substance. • For ice: 334 J/g • q (heat) = ∆Hfus*m (m= mass of ice/water) • Heat of Vaporization (∆Hvap) – The amount of heat (in joules) needed to vaporize 1 g of substance • For water: 2260 J/g • q (heat) = ∆Hvap*m (m= mass of water/steam)

  21. Example Problems • How much heat does it take to melt 20.5 g of ice at 0⁰C? • q = 334 J/g * 20.5 = 6850 J (6.85 kJ) • How much heat is released when 50.0 g of steam at 100 ⁰C condenses to water at 100 ⁰C? • q = - 2260 J/g * 50.0 g = -113,000 J (-113 kJ)

  22. Specific Heat Capacity • Specific Heat Capacity – amount of heat (q) required to raise the temperature of one gram of a substance by 1 degree. • C = J (energy gained or lost) mass (g) * Temp Change(⁰C)

  23. Heat Capacity Values Substance Spec. Heat (J/g•⁰C) Water 4.184 Ethylene glycol 2.39 Al uminum 0.897 glass 0.84

  24. Calculating Heat Gained or lost • The heat, q, gained or lost by a substance can be calculated by knowing the mass of the object, the temperature change, and the heat capacity. • q = mC∆T

  25. Calculations involving Heat • Example 1: A 5.00 g piece of aluminum is heated from 25.0⁰Cto 99.5⁰C. How many joules of heat did it absorb? • q = m * C * ∆T = 5.00 g * 0.897 J/g*⁰C * 74.5⁰C = 334 J

  26. Calculations involving Heat • Example 2: 10.2 g of cooking oil at 25.0 ⁰C is placed in a pan and 3.34 kJ of heat is required to raise the temperature to 196.4 ⁰C. What is the specific heat of the oil? • q = m*C*∆T • C = q/(m ∆T) • C = 3340 J/(10.2 g * (196.4-25.0) ⁰C) • C = 1.91 J/g* ⁰C

  27. Calculations involving Heat • Important Points! • q (heat) is a positive quantity. The sign (+ or -) refers to whether the system you’re looking gained it (+) or lost it (-). • From the previous example, the oil would lose 3340 J of heat upon cooling back to 25.0 ⁰C. (-3340 J heat lost) • Specific heat capacity is like a bucket. It is a measure of how much energy an object absorbs before the temperature changes.

  28. Heating Curve for Water Note that T is constant as ice melts

  29. Heating/Cooling Curve for Water

  30. +333 J/g +2260 J/g Heat & Changes of State What quantity of heat is required to melt 500. g of ice (at 0oC) and heat the water to steam at 100oC? Heat of fusion of ice = 333 J/g Specific heat of water = 4.2 J/g•K Heat of vaporization = 2260 J/g

  31. Heat & Changes of State What quantity of energy as heat is required to melt 500. g of ice (at 0⁰C) and heat the water to steam at 100 oC? 1. To melt ice at 0⁰C q = (500. g)(333 J/g) = 1.67 x 105 J 2. To raise water from 0 oC to 100oC q = (500. g)(4.2 J/g•K)(100 - 0)K = 2.1 x 105 J 3. To vaporize water at 100oC q = (500. g)(2260 J/g) = 1.13 x 106 J 4. Total energy = 1.51 x 106 J = 1510 kJ

  32. Practice problem If we add 6050 J of heat to 54.2g of ice at -10.0⁰C, whatwillit be at theend? Whattemperaturewillit be? Thespecificheat of ice is 2.03 J/g*⁰C.

  33. Pressure • Pressureis the force acting on an object per unit area: • Gravity exerts a force on the earth’s atmosphere • A column of air 1 m2 in cross section exerts a force of about 105 N (101,300 N/m2). • 1 Pascal (Pa) = 1 N/m2 . So, 101,300 N/m2 = 101,300 Pa or 101.3 kPa. • Since we are at the surface of the earth, we ‘feel’ 1 atmosphere of pressure.

  34. Barometer Vacuum • A barometer measures atmospheric pressure • The pressure of the atmosphere at sea level will hold a column of mercury 760 mm Hg. • 1 atm = 760 mm Hg 760 mm Hg 1 atm Pressure

  35. Units of pressure • 1 atmosphere (atm) = 760 mm Hg = 760 torr • 1 atm = 101,300 Pascals = 101.3 kPa • Can make conversion factors from these. • What is 724 mm Hg in atm ? • What is 724 mm Hg in kPa

  36. Phase Changes Vapor pressure is the pressure exerted by a vapor over a liquid. The vapor pressure increases with increasing temperature. This is why water evaporates even though it’s not 212˚F.

  37. Phase Changes However, when the vapor pressure of the water is the same as the atmospheric pressure the water is … boiling.

  38. Phase Diagram A phase diagram is a graph of pressure vs temperature that shows in which phase a substance exists under different conditions of T & P.

  39. Solid Liquid Gas Phase Diagram for water Boiling Pressure 1 Atm Melting Condensation Freezing Sublimation Deposition Temperature

  40. Ch. 3.2 - Chemical Properties and Changes • Chemical Properties – the ability to combine or change into other substances. • Example: Water won’t react with aluminum, but reacts with sodium and potassium (violently) and iron (slowly but surely). • A chemical property always relates to a chemical change – the changing of one or more substances into other substances. • A chemical change is also known as a chemical reaction.

  41. Signs of a Chemical Change • Color change • Odor • Gas • Formation of a precipitate (solid) • Heat

  42. Chemical Properties and Changes • Chemical changes are a rearrangement of atoms in the substance. • Chemical changes follow the Law of Conservation of Mass. • This means that when there is a chemical change, matter is neither created or destroyed, just changed in form. Massreactants = Massproducts

  43. Conservation of Mass Example • Reactants are the substances you start with. • Started with sugar and sulfuric acid • alcohol and air (O2) • Products are the new substances that are made. - Carbon, water vapor, and heat - water & carbon dioxide

  44. Conservation of Mass Example • Example: 10.00 g of red mercury (II) oxide powder is placed in an open flask. It is heated until it has fully converted to liquid mercury and oxygen gas. • Written as: • Mercury oxide  mercury + oxygen • The liquid mercury has a mass of 9.26 grams • The mass of oxygen formed in this reaction is 10.0 g (total) – 9.26 g (mercury) = 0.74 g oxygen

  45. Practice • 57.48 g of sodium reacts with chlorine gas to form 146.10 g of sodium chloride. • Sodium + Chlorine  sodium chloride • How much chlorine gas was used in the reaction?

  46. Elements • An element is a pure substance that cannot be broken down into simpler substances • Each element has a symbol and they are arranged in a periodic table

  47. Elements • Each element has it’s own symbol in the periodic table. • Either a single capital letter: H is for hydrogen • Or two letters, the first is capital the second is ALWAYS small: He is for helium. • Co is different than CO.

  48. Practice Name the element or symbol. • C • Calcium • Cl • Iodine • K • Mercury

  49. Compounds • Compounds are pure substances that are combinations of elements in a fixed ratio. • Example: Table salt is a combination of sodium and chlorine! NaCl (1:1 ratio)

More Related