1 / 14

Gigabit Ethernet PMD

Gigabit Ethernet PMD. Opto-Link Inc. – Presentation 6. Bryan Justice March 10, 2005. Converted schematic into board layout using ExpressPCB software. Board layout review Complete ordering of passives. First written report Follow-up on backordered parts Receive parts

jimsalazar
Télécharger la présentation

Gigabit Ethernet PMD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gigabit Ethernet PMD Opto-Link Inc. – Presentation 6 Bryan Justice March 10, 2005

  2. Converted schematic into board layout using ExpressPCB software. Board layout review Complete ordering of passives First written report Follow-up on backordered parts Receive parts If all parts are received, we can build our first board and begin testing Website Spring break fun Gigabit Ethernet:Progress Summary Completed Tasks Next Week’s Tasks

  3. Gantt Chart

  4. Transmitter Schematic

  5. Receiver Schematic

  6. Board Layout • Bottom left: Common cathode layout • Bottom right: Common anode layout • Top: Aggressive layout • We opted for a third layout on the board instead of implementing a reversible common anode/cathode layout. We can use this board with both the AOC and Emcore VCSELs.

  7. Keys to design • Good design practice and saving space allowed us to fit three layouts onto one miniboard. • We may use both our primary AOC VCSEL or our secondary Emcore VCSEL with the two bottom layouts.

  8. Design Elements (Continued) • The use of 06x03 passive components allowed for shorter lines, which is critical for avoiding large transmission lines with the high-frequency signal. • We determined that the 06x03 sized parts would not be significantly more difficult to solder than the 08x05 parts.

  9. Estimated Budget

  10. Ordering final components • The 06x03 capacitors were backordered, but should be in and shipped in time for our return for break. • The PCBs will be ordered before break and should also be in our possession after break. • The intention is for all components to have arrived for our return from break.

  11. Next Week • Order PCBs • First written report • Follow-up on backordered parts • Receive parts • If all parts are received, we may build our first board and begin testing • Complete website • Spring break fun

  12. References • ECE164 Group 2 Presentations. (April 17, 2004). ECE164 Group 2 Website. Retrieved February 24, 2005 from http://www.ee.duke.edu/~mbrooke/EE164.02/Spring_2004/group_2/presentations.html • http://www.expresspcb.com • Various vendor and manufacturer websites

More Related