1 / 7

Pipette Calibration

Pipette Calibration. Procedure Pipette, water and balance Test the maximum volume or minimum volume Pre-wet tips Test 5 volumes per setting. The Best of Both Worlds Precision + Accuracy. Precision. Accuracy. Pipette calibration criteria. Calibration Acceptance Criteria

jonathanwilson
Télécharger la présentation

Pipette Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pipette Calibration • Procedure • Pipette, water and balance • Test the maximum volume or minimum volume • Pre-wet tips • Test 5 volumes per setting

  2. The Best of Both Worlds Precision + Accuracy Precision Accuracy

  3. Pipette calibration criteria • Calibration Acceptance Criteria • Accuracy (mean error): How close a measurement is to an accepted value. Difference between the dispensed mass and the selected volume of a pipette. • Precision (random error): Indicates how close together or how repeatable the pipette volumes are. A precise measuring instrument will give very nearly the same result each time it is used.

  4. Averages for Sample Weightsand correction factors • Mean weight = sum of sample weights • of samples number of samples • Mean volume = (ave. weight + e) x Z • of samples • w = mean weight in mg • v = mean volume ul • e = evaporation rate in mg • Z = factor for correction

  5. Introduction to Calibration Activity You will be given a pipet to calibrate Calibration will be done by using the equation Density = Mass/volume Using a balance that can weigh up to 0.001mg Place a weigh boat on the balance and tare it Adjust pipet to 100 ul and place this into

  6. Calibration Continued • Adjust pipet to 100 ul volume • Attach a fresh pipet tip to the end of the pipet • Press the top button down until you meet resistance • Place tip into water and slowly release button • Now place water into weigh boat on balance • Weigh the amount of water present to 1 mg

  7. Calibration Acceptance Criteria Accuracy The closeness of a dispensed volume to the expected volume as set on the pipette It can be determined by how close the volumes measured are to the values expected volumes Measure the weight of the water and

More Related