1 / 11

Applying Product-Line Fault Tree Analysis to Build Safer Multi-Agent Systems

Applying Product-Line Fault Tree Analysis to Build Safer Multi-Agent Systems. Josh Dehlinger, Iowa State University Robyn R. Lutz, Iowa State University & Jet Propulsion Lab ISSRE 2005 Fast Abstract November 8 – 11, 2005

junius
Télécharger la présentation

Applying Product-Line Fault Tree Analysis to Build Safer Multi-Agent Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Applying Product-Line Fault Tree Analysis to Build Safer Multi-Agent Systems Josh Dehlinger, Iowa State University Robyn R. Lutz, Iowa State University & Jet Propulsion Lab ISSRE 2005 Fast Abstract November 8 – 11, 2005 This work was supported by NSF 0204139, NSF 0205588 and by the Iowa Space Grant Consortium

  2. Problem Statement Problem: How can reusable safety analysis techniques be incorporated into agent-oriented software engineering (AOSE)? Problem: How can safety analysis techniques be used to develop more dependable, safe multi-agent systems?

  3. Context • AOSE does not adequately address safety analysis • Some agent-based software systems will be developed that are safety/mission-critical • e.g., satellite constellations (TechSAT21, 3CornerSat, etc.) * Image courtesy of www.nasa.gov/goddard

  4. Addressing Safety • Difficult to adequately capture safety analysis of dynamically changing variation points in multi-agent systems • Ideally want to capture safety analysis in a reusable format • PL-SFTA is a tool-supported approach that addresses both of these issues

  5. Product-Line Engineering • Product Lines • Set of products sharing a common, managed set of variations that satisfy a selected market or mission within a single company • Set of systems that are very similar but with a few key differences (variations)

  6. PL-SFTA of a Multi-Agent System • A fault tree is a directed AND/OR graph that represents contributing causes to a hazard/failure • A PL-SFTA associates the individual variations in a system to the leaf nodes of a fault tree

  7. SFTA Derivation • Create a PL-SFTA in PLFaultCAT • For each role in an agent: • Select the variation points to include in the role for a specific agent • PLFaultCAT will automatically prune the PL-SFTA and provide a product-line member SFTA

  8. Safety Analysis of a Multi-Agent System • Identifying failure points • SFTA allows for easy identification of single-point failures • Allows for the identification of combinations of variation points that frequently contribute to hazards • Performs single point failure identification on PL-SFTA reduces the time of safety analysis

  9. Safety Analysis of a Multi-Agent System • Mitigating failure points • For single-point failures • Introduce new safety requirements into the multi-agent system to prevent single-failures • i.e., turn the OR gates into AND gates in the PL-SFTA • For risky variation point combinations • Introduce dependencies into the product-line multi-agent system • i.e., restricting the selection of risky combinations

  10. Conclusion • Incorporated ideas from safety analysis into multi-agent software engineering • Showed how an existing tool can support PL-SFTA for multi-agent systems • Described how the PL-SFTA can be used to identify and mitigate potential hazards to develop safer, more reliable multi-agent systems

More Related