1 / 24

Airbag Inflator Laser Weld Failure: Analysis and Minimization

Airbag Inflator Laser Weld Failure: Analysis and Minimization. Team Cleanweld , University of Idaho: Ken Bean, David Hewitt, Tess Howell, Nathan Jerred , Erik Shallman Advisor: Dr. David Drown May 1, 2009. Overview. Client Project Introduction Prior Analysis and Scope Objectives

kanan
Télécharger la présentation

Airbag Inflator Laser Weld Failure: Analysis and Minimization

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Airbag Inflator Laser Weld Failure:Analysis and Minimization Team Cleanweld, University of Idaho: Ken Bean, David Hewitt, Tess Howell, Nathan Jerred, Erik Shallman Advisor: Dr. David Drown May 1, 2009

  2. Overview • Client • Project Introduction • Prior Analysis and Scope • Objectives • Stored Gas Inflator • Wash Process • Spectrometry and Microscopy • Methods and Results • Recommendations

  3. Client • Autoliv Inc. • A worldwide leader in automotive safety • Products include seatbelts, airbags, child restraints, etc. • Products used by all major auto manufacturers • Based in Brigham City, Utah

  4. Project Introduction • Stored Gas Airbag Inflator • Three-Step Cleaning Cycle • “Leakers” • Represent loss of product • Autoliv’s Prior Analysis • Inflators are leaking due to failing laser welds • Failures not caused by welding parameters • Failure possibly due to surface contamination from the wash process • Scope of Research • Focus on burst disk laser welds • Includes a study of weld surfaces and wash process

  5. Objectives • Determine the effects of wash and rinse compositions on laser-weld failure • Identify surface contaminants present on inflators • Explore existing failures to determine leak rates • Examine the laser weld using optical microscopy • Analyze the composition of the wash detergent and rinse solutions • Recommend strategies to reduce weld failures and operational costs

  6. Stored Gas Inflator Inconel™ Disk The Diffuser The Initiator The Body

  7. Stored Gas Inflator

  8. Current Wash System • JenFab Drum Washer Part Flow Wash Rinse 1 Rinse 2 Dry Send Return Send Return Rinse + RP Wash Tap Water + RP Wash Solution

  9. Helium mass spectrometry • HMS confirmed inflators were leaking • Sniffer wand confirmed leaks from initiator burst disks only

  10. Scanning electron microscopy • Two inflators tested: • “As received” – taken directly off Autoliv’s wash process assembly line • “Clean” – washed in the lab with acetone and ethanol • Identified surface residue with EDS analysis • Compared the cleanliness of the inflators

  11. Scanning electron microscopy “As Received” “Clean”

  12. Optical Microscopy • Laser weld with Porosity • Laser weld without porosity

  13. Methods & Results • Inductively Coupled Plasma (ICP) • Provides the elemental composition of the solutions • pH • Enable us to compare the basicity of the solutions with their respective leaker data and draw important conclusion • Potassium Ion Selective Electrode (ISE) • Converts the activity of a specific ion dissolved in a solution into an electrical potential which can be measured • Conductivity • In solution, current flows by ion transport. Therefore, an increasing ion concentration in the solution will result in higher conductivity values

  14. ICP-RESULT

  15. PH-RESULTS

  16. Conductivity-Results

  17. ISE-Results

  18. ISE-Results

  19. Solution vs. Leakers

  20. [K+] vs. Conductivity

  21. Recommendations • Further research suggested • Current data is inconclusive • Solution Monitoring Methods • Conductivity and K-ISE viable methods • Counter Current Wash Modifications

  22. Suggested Wash Flow Revision • JenFab Drum Washer Tap Water + RP Dirty Rinse Wash solution Waste Water

  23. Acknowledgements • Autoliv Inc. • Mark Bunker • Dr. David Drown • Dr. Yanko Kranov • Dr. Karl Rink • Dr. Daniel Choi • Branden Poulsen

  24. Thank you for your attention. Questions?

More Related