1 / 32

ME 475/675 Introduction to Combustion

ME 475/675 Introduction to Combustion. Lecture 14. Announcements. HW 5 Due Now Midterm 1 September 29, 2014 In-class review Today Tutorial: Sunday morning, Sept 25, 9 to 10 am, in PE 113 (who will come?). Midterm. Open book with bookmarks, 1 page of notes 3-4 HW-like problems

kane-cobb
Télécharger la présentation

ME 475/675 Introduction to Combustion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ME 475/675 Introduction to Combustion Lecture 14

  2. Announcements • HW 5 Due Now • Midterm 1 • September 29, 2014 • In-class review Today • Tutorial: Sunday morning, Sept 25, 9 to 10 am, in PE 113 (who will come?)

  3. Midterm • Open book with bookmarks, 1 page of notes • 3-4 HW-like problems • Coverage • Chapter 1-3, HW 1-5 • All examples in class and book • Handout • Applicable problems from an only Midterm 1 • Intended to show problem style (like HW) • Please do not ask Rachel or me to work them for you

  4. Likely Problem Types • Mixtures and their properties • Heat of Combustion • for a specified temperature, TProd = TReact • Adiabatic Flame Temperature • no dissociation • constant Pressure or Volume • Chemical Equilibrium • for specified T and P • Simple Combustion Equilibrium Products • water/shift reaction • Diffusion • Stefan (planar) or radial • mass flow rates and mass fraction profiles • Boundary mass fraction • Dependence of diffusion coefficient on T and P

  5. Stoichiometric Hydrocarbon Combustion air • CxHy + a(O2+3.76N2)  (x)CO2 + (y/2) H2O + 3.76a N2 • a = number of oxygen molecules per fuel molecule • Number of air molecules per fuel molecule is a(1+3.76) • If a= aST = x + y/4, then the reaction is Stoichiometric • No O2 or Fuel in products • This mixture produces nearly the hottest flame temperature • If a < x + y/4, then reaction is fuel-rich (oxygen-lean) • If a> x + y/4, then reaction is fuel-lean (oxygen-rich) • Air to fuel mass ratio [kg air/kg fuel] of reactants • (generally ~20) • Need to find molecular weights

  6. Equivalence Ratio • Stiochiometric • Fuel Lean • CxHy + a(O2+3.76N2) • % Stoichiometric Air (%SA) • % Excess Oxygen (%EO) = (%SA)-100%

  7. x x Molecular Weight of a Pure Substance x x x x x x x • Only one type of molecule: • AxByCz… • Molecular Weight • MW = x(AWA) + y(AWB) + z(AWC) + … • AWi = atomic weights • Inside front cover of book • Hint: put in front cover of book • Fuels • Bookmark page 701 for fuels

  8. x o x Mixtures containing n components x x x x x x x o o o • number of moles of species • Total number of moles in system • Mole Fraction of species i • mass of species • Total Mass • MassFraction of species i • Useful facts: • but • Mixture Molar Weight: • Put inside front cover of book • Relationship between and

  9. Ideal Gas Equation of State • Universal Gas Constant • Inside book front cover • kJ = kPa*m3 • Specific Gas Constant • R = • MW = Molecular Weight of that gas • Number of molecules • N*NAV • Avogadro's Number,

  10. Thermodynamic Systems (reactors) • Closed systems • Open Steady State, Steady Flow (SSSF) Systems • How to find changes, and , for mixture when temperatures and composition change due to reactions (not covered in Thermodynamics I) m, E Inlet i Outlet o Dm=DE=0

  11. For a pure substances • Mass and Molar () Bases • N number of moles in the system • and • Tabulated: Appendix A, pp. 687-699, for combustion gases • bookmark • = • =; = • For mixtures • , • ,

  12. Standardized Enthalpy and Enthalpy of Formation • Needed to find and for chemically-reacting systems because energy is required to form and break chemical bonds • Standard Enthalpy at Temperature T = • Enthalpy of formation from “normally occurring elemental compounds,” at standard reference state: Tref = 298 K and P° = 1 atm • Sensible enthalpy change in going from Trefto T = • Normally-Occurring Elemental Compounds • Examples: O2, N2, C, He, H2 • Their enthalpy of formation at are defined to be = 0 • Use these compounds as bases to tabulate the energy to form other compounds

  13. Enthalpy of Combustion (or reaction) Products Complete Combustion CCO2 HH2O 298.15 K, 1 atm Reactants 298.15 K, P = 1 atm Stoichiometric • How much energy is released from a reaction if the product and reactant temperatures and pressures are the same? • 1st Law, Steady Flow Reactor • and Enthalpy of Reaction (< 0 for combustion) • Dependent on T and P of reaction • Heat of Combustion

  14. Example: Stoichiometric Methane Combustion • CH4 + 2 (O2 + 3.76 N2)  1 CO2 + 2 H2O + 7.52 N2 • @ 25C and 1 kmol CH4 p 688 p 692 p 701 (Heat into system for TR = TP) Water Vapor

  15. Other Bases • Per kg fuel • Heat of Combustion • (Heat out for TR = TP) • See page 701, LHV = Lower Heating Value • Corresponds to water vapor in the products p 692 p 692 • p. 701: Higher Heating Value = HHV = 55,528 (slightly larger than book, not due to dissociation since temp is low)

  16. Per kg of reactant mixture • LHV =

  17. Adiabatic () Flame Temperature, Complete Combustion Products CCO2 HH2O PP = PR, T = TAd Stoichiometric Reactants TR PR • 1st Law, Steady Flow Reactor • All chemical energy goes into heating the products • To find adiabatic flame temperature use • PP = PR and • Lower if we include dissociation

  18. Constant Volume Adiabatic Flame Temperature V, m • Use definition: (since standard internal energy U is not tabulated, and Ideal ga)

  19. Find equilibrium composition (reactants and products) for a given Temperature, Pressure & Mass Q T,P • aA + bB + …  eE + fF + … • Use Q and boundary work to achieve P and T • Equilibrium Constant • , • since • Standard State Gibbs Function Change • ) • In terms of Gibbs functions of formation (tabulated in App. A and B) • Products are “favored” • As increases, which happens when decreases • If NProd > NRact , as P decreases

  20. Equilibrium Products of Combustion • Combine Chemical Equilibrium (2nd law) & Adiabatic Flame Temperature (1st law) • For Example: Propane and air combustion • Ideal Stoichiomectric • Four products for a range of air/fuel ratios: • Now consider seven more possible dissociation products: • What happens as air/fuel (equivalence) ratio changes minor

  21. Simple Product Calculation method • No minor species • Assume and are known • What is a good assumption for lean or stoichiometric mixtures ? • c = e = 0 (no CO or H2), but now include • Mole Fractions • ; ; ;

  22. For Rich combustion • ; no (or fuel) • 4 unknowns: b, c, d and e • 3 Atom balances: C, H, O • Need one more constraint • Consider “Water-Gas Shift Reaction” equilibrium • Not dependent on P since number of moles of products and reactants are the same • ; • See plot from data on page 51 • KP = 0.22 to 0.1635 for T = 2000 to 3500 K

  23. Solution • Since , use “-” root

  24. Stefan Problem (no reaction) x L- • One dimensional tube (Cartesian) • Gas B is stationary: • Gas A moves upward • Want to find this • but treat as constant YB YA B+A Y A

  25. Mass Flux and fraction of evaporating liquid A For =0.99 =0.9 =0.5 =0.1 =0.05

  26. Liquid-Vapor Interface Boundary Condition • At interface need • Saturation pressure at temperature T • For water, tables in thermodynamics textbook • Or use Clausius-Slapeyron Equation (page 18 eqn. 2.19) • If given , we can use this to find • Page 701, Table B: , at A+B Vapor Liquid A

  27. Spherical Droplet Evaporation • A is evaporating, find and • B is stagnant • If and do not change with time • Then decreases as decreases

  28. Droplet Diameter versus time • Mass Conservation • , • Evaporation Const. • Constant slope for versus • Confirmed by experiment • Droplet life

  29. Dependence of on Temperature and Pressure • Fairly independent of T and P

  30. Extra Slides

  31. Flame temperature and major mole-fractions vs Tad[K] • Equivalence Ratio • At , O2, CO, H2 all present due to dissociation. Not present in “ideal” combustion • at .15 • at .05 • and decrease for • For decreases faster • For decreases faster % “Old” “New” Fuel Rich Get CO, H2 Fuel Lean O2

  32. Minor-Specie Mole Fractions • NO, OH, H, O • < 4000 ppm = 0.4% • Peak near ppm

More Related