1 / 63

Vision Based Motion Control

Vision Based Motion Control. Martin Jagersand University of Alberta CIRA 2001. Vision Based Motion Control. Martin Jagersand University of Alberta CIRA 2001. Content. Vision based motion control Programming and solving whole human tasks Software systems for vision and control

kathleen-andrews
Télécharger la présentation

Vision Based Motion Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Vision Based Motion Control Martin Jagersand University of Alberta CIRA 2001

  2. Vision Based Motion Control Martin Jagersand University of Alberta CIRA 2001

  3. Content • Vision based motion control • Programming and solving whole human tasks • Software systems for vision and control • Discussion

  4. 1. How to go from Visual sensationto Motor action?> • Camera -> Robot coord Robot -> Object

  5. Closed loop traditional visual servoing • This talk: focus on estimating the geometric transforms EE

  6. Camera Frame at projection center Many different models Robot Base frame End-effector frame Object frame Lots of possible coordinates Traditional modeling: P=P1(<params>) P2(<params>)… Pn(<params>)

  7. Hand-Eye system Motor-Visual function: y=f(x) Jacobian: J=( dfi / dxj )

  8. Recall:Visual specifications • Point to Point task “error”: Why 16 elements?

  9. Visual Servoing • Observed features: • Motor variables: • Local linear model: • Visual servoing steps: 1 Solve: 2 Move:

  10. Find J Method 1: Test movements along basis • Remember: J is unknown m by n matrix • Assume movements • Finite difference:

  11. Find J Method 2:Secant Constraints • Constraint along a line: • Defines m equations • Collect n arbitrary, but different measures y • Solve for J

  12. Find J Method 3:Recursive Secant Constraints • Based on initial J and one measure pair • Adjust J s.t. • Rank 1 update: • Consider rotated coordinates: • Update same as finite difference for n orthogonal moves

  13. Trust region of J estimate • Let be the trust region at time t • Define a model agreement: • Update the trust region recursively: Where dupperand are dlower predefined constants

  14. Visual Servoing Steps • Solve: • Update and move: • Read actual visual move • Update Jacobian: repeat

  15. Visual Servoing Steps • Solve: • Update and move: • Read actual visual move • Update Jacobian: repeat

  16. Jacobians = Spline model of underlying non-linear function • Over time acquires several Jacobians J • Each J a hyperplane • Collection of J’s form a (sparse) piecewise linear spline

  17. Jacobian based visual model • Assume visual features m>>n motor freedoms • All visual change restricted to n freedoms by: • Can predict visual change • Can also parameterize x visually

  18. e1 Related visual model:Affine model O e2 e3 • Affine basis • Image projection of origin: • Image basis:

  19. e1 q Find affine coordinates O e2 e3 • Observe (track) y through time • Solve an equation system to find q • Reprojection: Have q,want y

  20. Relation Affine – Jacobian image models • Rewrite affine model

  21. Composite affine and Jacobian model • Chain the affine and Jacobian model • Represents rigid objects in arbitrary motor frame

  22. Transforms Affine-Jacobian model • Measurement matrix • Affine coordinate equation:

  23. Experiment:Affine animation of rigid structure

  24. Affine vs. Visual-Motor

  25. Other sensory modalities: Force and contact manipulation • Accuracy is limited by: Visual tracking and Visual goal specification • Specifying well defined visual encodings can be difficult • Limited to non-occluded settings • Not all tasks lend themselves to visual specification.

  26. Constraint Geometry • Impact force along surface normal: • Sliding motion: • 3rd vector:

  27. Constraint Frame • With force frame = tool frame we get: Assume frictionless => Can update each time step P2 P1 P3

  28. Hybrid Control Law • Let Q Joint -> Tool Jacobian • Let S be a switching matrix, e.g. diag([0,1,1]) • Velocity control u: Visual part Force part

  29. Accounting for Friction • Friction force is along motion direction! • Subtract out to recover surface normal:

  30. Motion Sequence

  31. Motion Sequence

  32. Summary of model estimation and visual motion control • Model estimation is on-line and requires no special calibration movements • Resulting Jacobians both model/constrain the visual situation and provide visual motor transf. • Motion control is direct from image based error functions to motor control. No 3D world space.

  33. 2. How to specify a visual task sequence? • Grasp • Move in • Cut Grasp Reach close Align Turn

  34. E (y) = wrench y - y y - y 4 2 5 7 y • (y  y ) y • (y  y ) 8 6 2 4 3 1 Recall: Parallel Composition Example: Visual error function “spelled out”:

  35. Serial CompositionSolving whole real tasks • Task primitive/”link” • Acceptable initial (visual) conditions • Visual or Motor constraints to be maintained • Final desired condition • Task =

  36. “Natural” primitive links • Transportation • Coarse primitive for large movements • <= 3DOF control of object centroid • Robust to disturbances • Fine Manipulation • For high precision control of both position and orientation • 6DOF control based on several object features

  37. Example: Pick and place type of movement 3. Alignment??? • To match transport final to fine manipulation initial conditions

  38. More primitives 4. Guarded move • Move along some direction until an external contraint (e.g. contact) is satisfied. 5. Open loop movements: • When object is obscured • Or ballistic fast movements • Note can be done based on previously estimated Jacobians

  39. Solving the puzzle…

  40. Teaching and Programming in Visual Space • Tele Assistance • A tele-operator views the scene through stereo cameras • Objects to be manipulated are pointed out on-line • Visual Programming • Off-line • Like xfig, macpaint, but with a palette of motor actions. • Teaching by Showing • A (human) manipulation is tracked in visual space • The tracked data is used to (automatically?) generate a sequence of visual goals

  41. HCI: Direct manipulationExample: xfig drawing program • Icons afford use • Results visible • Direct spatial action-result mapping matlab drawing: • line([10, 20],[30, 85]); • patch([35, 22],[15, 35], C); • % C complex structure • text(70,30,'Kalle'); • % Potentially add font, size, etc

  42. Example:Visual programming

  43. Task control summary • Servoing alone does not solve whole tasks • Parallel composition: Stacking of visual constraints to be simultaneously satisfied • Serial composition: Linking together several small movements into a chain of continuous movements • Vision-based user interface • Tele-assistance • Visual Programming • Teach by showing

  44. Types of robotic systems Preprogrammed systems Autonomy Programming by demonstration Tele-assistance Supervisory control Generality

  45. 3. Software systems for vision-based control

  46. Hand-EyeSystem

  47. System requirements • Solve many very different motion tasks • Flexible, teachable/re-programmable • Real time • On special embedded computers or general workstations • Different special HW • Multiprocessors

  48. Toolbox

  49. System design • Interpreted “scripting” language gives flexibility • Compiled language needed for speed and HW interface. Examples Matlab Haskell PVM Dyn linking (mex) Greencard C, C++, fortran C, C++

  50. Usage example: • Specialize robot • projandwait(zero3,’robotmovehill’,A3D,’WaitForHill’); • Initialize goals and trackers • [TrackCmd3D,N] = InitTrackers([1 1],[0,1]); • PU = GetGoals([1 1],[0,1]); • Servo control • J3s = LineMove(‘projandwait’,TrackCmd3D,J3i,PU,Ndi,err)

More Related