1 / 16

DVA-1 Baseline Optical Design Lynn Baker USSKA Consortia Meeting Washington DC June 3,4, 2010

DVA-1 Baseline Optical Design Lynn Baker USSKA Consortia Meeting Washington DC June 3,4, 2010. DVA-1 Optics Parameters Feed opening angle of 55 degrees, nominally -16 db. feed taper on secondary Compromise value to accommodate some wideband feeds

king
Télécharger la présentation

DVA-1 Baseline Optical Design Lynn Baker USSKA Consortia Meeting Washington DC June 3,4, 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DVA-1 Baseline Optical Design Lynn Baker USSKA Consortia Meeting Washington DC June 3,4, 2010 Lynn Baker USSKA Consortia Washington, DC

  2. DVA-1 Optics Parameters • Feed opening angle of 55 degrees, nominally -16 db. feed taper on secondary • Compromise value to accommodate some wideband feeds • Will accommodate a corrugated horn of appropriate design • Low edge taper reduces spillover and reduces wide angle sidelobes • Wider opening angles increases the primary size • Possible to design a different subreflector, different angle, for a given primary • Shaping controls distribution of power in the aperture • Trades aperture efficiency versus near in sidelobe levels • Different shaping has different caustic sizes, effects the accommodation of a PAF • Shaping gives high efficiency, while maintaining very low wide angle sidelobes Lynn Baker USSKA Consortia Washington, DC

  3. Lynn Baker USSKA Consortia Washington, DC

  4. General Optical Configuration • Subreflector location is a compromise between support frame and primary size • Lower minimizes secondary / feed framing height • Higher makes the primary smaller • Larger opening angle shifts the subreflector lower, primary grows • Effectively favors higher gain feeds • Feed high is tentatively chosen for mechanical advantages • Feed low has advantages for system noise temperature • Shielding is needed to mitigate ground noise pickup Lynn Baker USSKA Consortia Washington, DC

  5. Optics Option For DVA-1, #1 Lynn Baker USSKA Consortia Washington, DC

  6. Optics Option For DVA-1, #2 Lynn Baker USSKA Consortia Washington, DC

  7. Optics Option For DVA-1, #3 Lynn Baker USSKA Consortia Washington, DC

  8. Optics Option For DVA-1, #4 Lynn Baker USSKA Consortia Washington, DC

  9. Optics Option For DVA-1, #5 Lynn Baker USSKA Consortia Washington, DC

  10. Lynn Baker USSKA Consortia Washington, DC

  11. Lynn Baker USSKA Consortia Washington, DC

  12. Lynn Baker USSKA Consortia Washington, DC

  13. Lynn Baker USSKA Consortia Washington, DC

  14. Lynn Baker USSKA Consortia Washington, DC

  15. Physical Optics Analysis, Gaussian Feed Lynn Baker USSKA Consortia Washington, DC

  16. Final Choice Of Optics • Interaction with CPG is critical • Provide detailed antenna patterns for science performance evaluation • Include various feeds including corrugated horn for evaluation • Compare model results for ATA feed with ATA measured results • Feed limitations should not effect optics design • “Hardware is destiny” • Multiple feeds can exploit different features of the optics • Accomodating a PAF at “prime caustic” is under study • Preliminary analysis suggests a modestly larger PAF will work Lynn Baker USSKA Consortia Washington, DC

More Related