1 / 15

Types Of Buttweld Fittings

A buttweld fitting is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment.

kkpipefittings
Télécharger la présentation

Types Of Buttweld Fittings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Types of Buttweld Fittings Presented By www.kkfittings.com

  2. About Buttweld Fittings A buttweld fittingis a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. Forged Steel buttweld fittings are manufactured in accordance with ANSI / ASME B16.9.  Buttweld fittings use seamless or welded pipe as the starting material and are formed to get the shape of elbows, tees and reducers etc. Buttweld Pipe Fittings which are broadly used in instrumentation, piping and process control and many other industrial applications, etc. www.kkfittings.com

  3. 45 Degree Elbow 45 Degree Elbow is found in long radius and short radius version. The center to face distance for a long radius is nominal pipe size, while the center to face distance for 45 Degree Short Radius Elbow even is to nominal pipe size. www.kkfittings.com

  4. 90 Degree Elbow 90 Degree Elbow is found in long radius and short radius version. The centre to face distance for a long radius is nominal pipe size, while the centre to face distance for 90 Degree Short Radius Elbow even is to nominal pipe size. www.kkfittings.com

  5. Tee Tee is used in construction, electricity, shipbuilding and chemical Industry. The Buttweld Tee Fitting helps to connect auxiliary equipment to a pipe as it is welded on both sides of the pipe, leaving the branch open for branch off. www.kkfittings.com

  6. Reducing Tee Reducing Teeis required as the branch has the same diameter as the pipe whereas, reducing tee is used as the branch has a smaller diameter as the run-pipe. The Buttweld Reducing Tee Fitting is used in ultra- high purity systems, waste and water supply, they provide smooth flow paths. www.kkfittings.com

  7. Equal Tee Equal tee is required as the branch has the same diameter as the pipe whereas, reducing tee is used as the branch has a smaller diameter as the run-pipe. The Buttweld Equal Tee Fitting is used in petrochemical, oil, natural gas, liquefied gas, power plant, nuclear power, pharmacy, and food sanitation. www.kkfittings.com

  8. Equal Cross Buttweld Equal Cross has the outlet of the same diameter, one inlet, and three outlets. They are used to join pipes and are welded to the pipes. It is required to distribute the flow of a fluid in three different directions. www.kkfittings.com

  9. Reducing Cross Reducing Cross Fittings is used for multiple connections of pipes. It has four ends of the cross in reducing diameter. It is suitable for interlinked plumbing systems and it can handle any high or low pressure flow of liquid through it.  www.kkfittings.com

  10. Reducer There are two main types of Reducers concentric and eccentric reducers. An Eccentric Reducer is used in piping systems between pipes of different sizes. It has an edge that is parallel to the connecting pipe.  www.kkfittings.com

  11. End Cap Pipe Cap Fittings is used for protecting the end of pipe and other fittings. It also provides an increased diameter range and wide tolerance delivers a reduction in stock holding costs. They are made with a new design based on proven technology to deliver total peace of mind. www.kkfittings.com

  12. Pipe Nipple Pipe Nippleare suitable for connecting two pipes with no risk leakage to ensure obstruction free flow of liquids and gases in oil, gas and petrochemical industries. www.kkfittings.com

  13. Plug These are widely used for various industrial applications.These Pipe-Plugsarrests the flow of liquid in particular chambers effectively which also are very much efficient in the performance of fluid pumping machines. www.kkfittings.com

  14. Union These Pipe Unionsare a very useful tool in pipelining and are used for connecting two pipes of different materials. These are highly reckoned among our clients due to their various attributed such as quality, reliability, consistency, and durability etc. www.kkfittings.com

  15. Thank You! Follow us : Facebook| Twitter +91  22 66394167 sales@kkfittings.com www.kkfittings.com

More Related