1 / 16

SIMULATION

ON. SIMULATION. BROADBAND NETWORK TECHNOLOGY. Network Research Group Universiti Sains Malaysia. Table of Contents. BNT ATM ATM Building Blocks Physical Layer ATM Layer Transmission Delay System Works. OBJECTIVE.

kueng
Télécharger la présentation

SIMULATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ON SIMULATION BROADBAND NETWORK TECHNOLOGY Network Research Group Universiti Sains Malaysia

  2. Table of Contents • BNT • ATM • ATM Building Blocks • Physical Layer • ATM Layer • Transmission Delay • System Works

  3. OBJECTIVE • This simulator will be developed to provide the user to analyze the factors that should be considered when a packet is sent from one node (source) to another node (destination)in broadband network.

  4. Broadband Network Technology BNT IS BASICALLY A DIGITAL VIRTUAL CIRCUIT FOR MOVING FIXED SIZED PACKETS (CELLS) FROM SOURCE TO DESTINATION AT VARIOUS SPEEDS. BASED ON ATM TECHNOLOGY

  5. ATM Asynchronous Transfer Mode • Fast Packet Switching Technology • Information Transmission Technology • Supports Variable Bit Rate (VBR) & Constant Bit Rate (CBR) information • Connection-Oriented -> Uses pre-established “virtual channels” which are like telephone calls • Requires all end stations to convert information into small, fixed- sized “cells” • Cells are placed on appropriate virtual channel

  6. Plane Management Layer Management Control/User Plane Control User ATM Adaptation Layer ATM Layer Physical Layer ATM BUILDING BLOCKS B-ISDN Reference Model

  7. Physical Layer • Is concerned with transmitting raw bits over a communication channel. • The physical transmission medium • Copper • Fiber

  8. ATM Layer • Has the same function as the Network layer in OSI model • Deals with moving cells from source to destination • It has the characteristic of a network layer protocol:- • End to end virtual circuit • Switching • Routing • It is connection oriented • Four main area will be covered in this layer : • Cell format • Header • Connection Setup • Routing and Switching

  9. Cell Format • Cells are 53bytes (5bytes header and 48bytes payload) • 2 interfaces I) UNI II) NNI • User Network Interface is between a host and an ATM Network • Network Network Interface is between two ATM switches

  10. AAL 5 BYTES 48 BYTES ATM HEADER PAYLOAD ATM Cell Format PHYSICAL ATM Layer

  11. Connection Setup • A connection must be established before a packets is sent (connection-oriented) • A setup message is sent to setup a connection and a release message is to release the connection

  12. Routing • To determine the path taken by a message (virtual path and virtual circuit) • Takes place in ATM Layer • There are many routing techniques :- • Fixed • Flooding • Adaptive Isolated • Distributed • Centralized

  13. Transmission Delay • When packets are sent from source to destination, a transmission time is taken which is the transmission delay. • Transmission delay, T is the time period between the time that the first bit of the message enters to the fiber and the time the last bit of message exits from the other end. • Transmission delay is given by the formula below:- T = L/C + 8N/B + X

  14. L/C - Propagation delay (time taken to send packets from source to destination) 8N/B - Time period the first bit of message exits from the other end and the time that the last bit of message exits there X - Delay in ATM switch ( in most cases the delay is estimated to be less than 10 milisec) • Since it is based on TCP/IP protocols, the propagation delay will be 2 x L/C. This is the time taken to send packets and receive acknowledgement (ACK) from the receiver.

  15. System Works • The user will be allowed to create nodes (transmitter and ATM switch) throughout Malaysia • User are allowed to send packets through any path based on the bandwidth provided

  16. BNT PROGRESS REPORT Preliminary Studies : Research Studies & Information Gathering Phase I : Physical Layer Transmission Of Data Over Communication Channels Phase II : ATM Layer ATM Simulation based on the layer 2 Final Phase : TCP/IP Implementation & Simulation In Putra Jaya

More Related