1 / 16

Watt-Class Beamstoppers for ALS

Watt-Class Beamstoppers for ALS. 01/26/2011 Tom Swain & Mike Kritscher. 01032-UE41-AUP1. Features: DN40 Version Series 01 variant 01032-UE41-AUP1 2.75” CF flanges w/ 1.5” CA Meets OP 02-30 requirements LOTO Function Double position limit switches D-sub connector termination.

landis
Télécharger la présentation

Watt-Class Beamstoppers for ALS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Watt-Class Beamstoppersfor ALS 01/26/2011 Tom Swain & Mike Kritscher

  2. 01032-UE41-AUP1 Features: DN40 Version Series 01 variant 01032-UE41-AUP1 2.75” CF flanges w/ 1.5” CA Meets OP 02-30 requirements LOTO Function Double position limit switches D-sub connector termination

  3. 2.75” CF version (DN40 clear-aperture)

  4. ES PSS Assembly Safety Requirements: Established OP 02-30

  5. LOTO Features Lockable “Closed” position Visible indication of locked position Locking pin is retained by Leash Leash Helical spring not shown

  6. Section Views

  7. Limit Switch Reliability • There have been no reported failures of this switch in the field for the past 10 years (several thousands sold). These are featured on several types of valves that we sell. • This valve is designed for 50,000 cycles. The individual switch reliability is far better than this. And there are two of them. • There are dozens of these in service right now at ALS with no reports of limit switch failures with thousands of cycles of operation.

  8. Limit Switch Assembly senses true close and open (tri-state feedback) Slot for position indicator tang Open and Closed visual position indication

  9. Switch Dimensions / Details 43 mm paddle travel 41 mm switch gap 2 mm over travel 2 mm Fabrication tolance 3.2 mm (1/8” overlap ) 7.2 mm total overlap 43 -7.2 = 35.8 eff. opening 40.1 ID – 35.8 = 4.3 over hang

  10. Solid Stainless Gate Details Paddle in “Closed Position” Clear-aperture: 40.1 mm Gate overlap: 7.2 mm

  11. Gate Failure scenarios Thermal Loading Information: At 1 Watt, the paddle should not exceed 70 C. We expect design to be suitable for steady state gate temperatures up to 250C. VAT has not tested maximum absorbed power capabilities. Steady state FEA radiation models might be available on request. Pin Joint Failure: If fixation pin comes out halfway, it will interfere with the bushing and the Open limit switches will not be asserted VAT has never experienced this failure mode and considers it extremely unlikely. Paddle Pin or Web Failure If the paddle were to become disconnected it would fall to the bottom of the body and it is large enough to ensure the clear aperture is covered with out gaps. Overlap in ‘fallen’ condition

  12. Quote and Contact Information DN40 Version Series 01 variant 01032-UE41-AUP1 2.75” CF flanges with double set of limit switches, closing spring, LOTO function, D-sub common connector termination $4,900 each for 2+ pcs Delivery 12 Weeks ARO

More Related