1 / 29

Memory and Stack

Memory and Stack. Memory. In SPARC, there are only 32 registers. Not enough to hold all data for computation. We use memory to store variables. Variables in memory can be: C SPARC bits char byte 8 short halfword 16 int, long word 32. Memory.

leanna
Télécharger la présentation

Memory and Stack

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Memory and Stack Assembly Language

  2. Memory • In SPARC, there are only 32 registers. • Not enough to hold all data for computation. • We use memory to store variables. • Variables in memory can be: C SPARC bits char byte 8 short halfword 16 int, long word 32 Assembly Language

  3. Memory • All variables in memory must be “aligned”. • A “short” variable is 16-bit long or halfword (2 bytes) • It must be stored in the addressed that are divisible by “two”, or “even address” (aligned to two-byte boundary) • For example, 0, 2, 4, …, 1024, 1026, etc. • An “int” variable is 32-bit long or one word (4 bytes) • It must be stored in the addressed that are divisible by “four”. (aligned to four-byte boundary). • For example, 0, 4, 8, …, 1024, 1028, etc. • This is for efficiency in hardware. Assembly Language

  4. Memory • The SPARC architecture is big endian. • Store LSB (the smallest-numbered byte) at the first address. • For example: to store a short variable containing 0x0932 at address 1026 (must be aligned!) • 0x32 (LSB) is stored at address 1026. • 0x09 (MSB) is stored at address 1027. • Note: an instruction must be word-aligned. Why ? Assembly Language

  5. The Stack • We store automatic or “local” variables in the memory called “Stack”. • An automatic variable is a variable that is accessible only inside a function. int g; int main() { int i, j; ... } Global var Local vars Assembly Language

  6. The Stack Pointer • The stack is last-in-first-out (LIFO). • Each program has its own private stack. • %o6 aka. %sp is the stack pointer. • Stack is located near the top of memory (biggest addressed). • When the stack grows, the %sp decreases. • When the stack shrinks, the %sp increases. • Thus to get more spaces in the stack, we subtract the number of bytes from the stack pointer. Assembly Language

  7. To get 64 bytes more: Sub %sp, 64, %sp The Stack Pointer Assembly Language

  8. The Stack Pointer • The stack must be doubleword (8-byte) aligned. • Thus, the address must be divisible by eight. • If we want 94 bytes, we must ask for 96 bytes to keep the stack aligned. • Thus: sub %sp, 96, %sp • Or we can: add %sp, -94 & -8, %sp • Why -94&-8 ? Check out two’s complement. Done by assembler* Assembly Language

  9. The Frame Pointer • The stack pointer is always changed as more variables are needed. • How can we refer to a variable ? • Use the frame pointer, %fp or %i6. • The frame pointer remains fixed for each subroutine. • At the beginning of the program, we execute a “save” instruction to allocate space in the stack. Assembly Language

  10. Frame and Stack Pointers • Subroutine A calls B: int A() { ... B(); ... } int B() { ... } Before Call After Call Assembly Language

  11. Save Instruction • The save instruction must allocate space for both local variables and registers. • Must allocate 64 bytes + spaces for variables. save %sp, -64-bytes_for_vars, %sp • Suppose we want to store five “int” (4-byte) variables (var0 - var4): save %sp, (-64-(5*4)) & -8, %sp • This is actually: save %sp, -88, %sp Assembly Language

  12. Save Instruction Assembly Language

  13. Addressing Stack Variables • As SPARC is the load-store architecture, we cannot compute variables data from the stack directly. • We must load them to registers, compute, and then store back to the stack. • Remember all variables must be aligned based on its size. • SPARC has different load/store instructions for each type. Assembly Language

  14. Load Instructions • ldsb - load signed byte, propagate sign. • ldub - load unsigned byte, clear high 24 bits of register. • ldsh - load signed halfword, propagate sign. • lduh - load unsigned halfword, clear high 16 bits of register. • ld - load word • ldd - load double, register number even, first four bytes into register n, next four into register n+1. Assembly Language

  15. Load Instructions ld [%fp - 4], %l1 ! Load var0 into %l1 ld [%fp - 8], %o2 ! Load var1 into %o2 mov -16, %l4 ld [%fp + %l4], %l3 ! Load var3 into %l3 ldd [%fp - 16], %g2 ! Load var3 into %g2 ! and var2 into %g3 ldd [%fp - 16], %l5 ! Illegal, why ? Assembly Language

  16. Store Instructions • stb - store low byte of register, bits 0 - 7 into memory. • sth - store low two bytes of register, bits 0 - 15 into memory. • st - store register. • std - store double, register number even, first four bytes from register n, next four from register n+1. Assembly Language

  17. Store Instructions st %l1, [%fp - 4] ! Store %l1 into var0 st %o2, [%fp - 8] ! Store %o2 into var1 sth %l4, [%fp - 6] ! Store halfword of %l4 sth %l4, [%fp - 9] ! Illegal, why ? st %o2, [%fp - 4 + %l2] ! Illegal, why ? st %o2, [%fp - 5120] ! Illegal, why ? Assembly Language

  18. Variable Offsets in Stack • We use the frame pointer as the base reference to variables in the stack. • All variables must be properly aligned. • Example: int a, b; // 4 bytes each char ch; // 1 byte short c, d; // 2 bytes each unsigned e; // 4 bytes Assembly Language

  19. Variable Offsets in Stack a: %fp - 4 b: %fp - 8 ch: %fp - 9 c: %fp - 12 d: %fp - 14 e: %fp - 20 Assembly Language

  20. Actual Addresses Assembly Language

  21. Offsets and Stack Allocation • Use macro to arrange the offsets define(a_s, -4) define(b_s, -8) define(ch_s, -9) define(c_s, -12) define(d_s, -14) define(e_s, -20) • Allocate spaces on stack: save %sp, ((-64 - 20) & -8), %sp ==> save %sp, -84 & -8, %sp ==> save %sp, -88, %sp Assembly Language

  22. Manipulate Variables in Stack • To load and store ld [%fp + a_s], %l0 ldub [%fp + ch_s], %l1 ! char type is unsigned. ldsh [%fp + d_s], %l2 ! short type is signed. ld [%fp + e_s], %l3 • To compute: b = a + c; ld [%fp+a_s], %l0 ldsh [%fp+c_s], %l1 add %l0, %l1, %l2 st %l2, [%fp+b_s] Assembly Language

  23. Variables in Registers • Some variables are used very often. • Loop counters • We can use registers to hold their values instead of using stack. • In C, we use a keyword “register”. register int i; // i is in a register. • When referred to these variables, we use values from registers directly. Assembly Language

  24. Variables in Registers int a, b; register int j, k; int x, y; • Only a, b, x, and y are in the stack. • j and k are in registers. define(a_s, -4) define(b_s, -8) define(x_s, -12) define(y_s, -16) define(j_r, l0) define(k_r, l1) Assembly Language

  25. Variables in Registers • To compute: j = 19; a = 8; y = j - 3 + a; • Note: we use %l2 and %l3 as temporary registers. mov 19, %j_r mov 9, %l2 st %l2, [%fp+a_s] sub %j_r, 3, %l2 ld %l3, [%fp+a_s] add %l2, %l3, %l2 st %l2, [%fp+y_s] Assembly Language

  26. main() { int a, b, c; register int i; i = 0; a = 100; b = 15; c = 0; while(i < 20) { c += a - b; a--; i = i + 2; } } Our Fourth Program Assembly Language

  27. Our Fourth Program define(a_s, -4) define(b_s, -8) define(c_s, -12) define(i_r, l0) .global main main: save %sp, (-64 + -12) & -8, %sp clr %i_r ! i = 0; mov 100, %l1 st %l1, [%fp + a_s] ! a = 100; mov 15, %l1 st %l1, [%fp + b_s] ! b = 15; Assembly Language

  28. Our Fourth Program clr %l1 st %l1, [%fp + c_s] ! c = 0; loop: cmp %i_r, 20 bge done nop ld [%fp + a_s], %l1 ld [%fp + b_s], %l2 sub %l1, %l2, %l3 ! a - b ld [%fp + c_s], %l1 add %l1, %l3, %l1 ! c + a - b st %l1, [%fp + c_s] ! c += a - b; Assembly Language

  29. Our Fourth Program ld [%fp + a_s], %l1 sub %l1, 1, %l1 st %l1, [%fp + a_s] ! a--; add %i_r, 2, %i_r ! i = i + 2 ba loop nop done: mov 1, %g1 ta 0 Assembly Language

More Related