1 / 11

Competency: 206.00 Draw wall sections and details

Competency: 206.00 Draw wall sections and details. Objective: 206.03 Apply concepts of wood frame wall construction. Wood Frame Wall Construction Materials. Wood studs should Be straight Have good stiffness #2 grade or better Moisture content of 15-19% .

leighna
Télécharger la présentation

Competency: 206.00 Draw wall sections and details

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Competency: 206.00Draw wall sections and details Objective: 206.03 Apply concepts of wood frame wall construction.

  2. Wood Frame Wall ConstructionMaterials • Wood studs should • Be straight • Have good stiffness • #2 grade or better • Moisture content of 15-19%

  3. Wood Frame Wall ConstructionMaterials • 2x4 and 2x6 lumber are most popular sizes for wall construction • 2x6 materials can be used for exterior walls for additional insulation thickness • 2x4 materials used for most interior walls • 2x6 and 2x8 materials used to allow plumbing to pass through wall

  4. Wood Frame Wall ConstructionMaterials

  5. Wood Frame Wall ConstructionComponents • Sole Plate/Bottom Plate • Holds studs together in a wall unit • Anchors wall to subfloor • Wall studs • Spaced 16” or 24” O.C. • Length based on ceiling height • Top plate • Ties intersecting walls together • Provides additional strength between studs where ceiling joists/rafters do not bear directly above the stud

  6. Wood Frame Wall ConstructionComponents • Headers • Size depends on its span and loading • Carries load of the roof where studs have been removed from the wall to create an opening

  7. Wood Frame Wall ConstructionComponents • Solid headers • Fill the space above the opening • Header formed by turning two units of framing lumber on edge with a ½” spacer between the members • For 2x4 stud wall a 3-½” thick unit

  8. Wood Frame Wall ConstructionComponents • Solid headers • Studs are not full length • Fill the space above the header • Headers are supported by trimmers or jack studs

  9. Wood Frame Wall ConstructionComponents • Corner Bracing • Plywood, OSB, or similar material may be used in place of the let-in brace • Diagonal metal straps may be used

  10. Wood Frame Wall ConstructionExterior Finishing • Wall sheathing • Typically ½” thick • May be a structural material and/or an insulating material • Often applied to frame wall prior to wall being raised from the subfloor • Often applied to frame wall prior to wall being raised from the subfloor

  11. Wood Frame Wall ConstructionExterior Finishing • Wall ties • Masonry wall is not a load bearing wall • Frame wall carries the load of the structure • Ties are bent to fit between mortar joints • Corrugated metal ties • Placed 16” O.C. vertically • Placed 32” O.C. horizontally

More Related