1 / 15

US CMS Silicon Tracker Project Regina Demina KSU Florida State University May 11, 2002

US CMS Silicon Tracker Project Regina Demina KSU Florida State University May 11, 2002. CDF SVX installation. A bit of history. December 1999 – CMS made a decision to go with all silicon tracker = 68m 2 (inner barrel and disks) + 164m 2 (outer barrel and disks) = 232m 2

leon
Télécharger la présentation

US CMS Silicon Tracker Project Regina Demina KSU Florida State University May 11, 2002

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. US CMS Silicon Tracker Project Regina Demina KSU Florida State University May 11, 2002

  2. CDF SVX installation A bit of history • December 1999 – CMS made a decision to go with all silicon tracker = • 68m2(inner barrel and disks) + 164m2(outer barrel and disks) = 232m2 • 5.1 M + 5.6 M = 10.7 M channels • End of 1999 – CDF and DØ silicon detectors (~10 m2 of silicon, ~2M channels) out of SiDet to be installed in collision halls A naturaldecision for US institutions to join the silicon effort.

  3. Si Tracker Group • Fermilab • B. Flaugher, R. Lipton, P. Rapidis, L. Spiegel, S. Tkaczyk • Kansas State University • T.Bolton,R.Demina,W.Kahl,S.Korjenevski, • W.Reay, R.Sidwell, N.Stanton • Northwestern University • D. Buchholz • Texas Tech University • A. Sill • University of California, Riverside • Gail Hanson • University of California, Santa Barbara • C.Campagnari, D. Hale, J.Incandela • University of Illinois, Chicago • L. Chabalina, C. Gerber • University of Kansas • P. Baringer, A. Bean, L. Christofek, X. Zhao • University of Rochester • R. Eusebi, E. Halkiadakis, A. Hocker, P. Tipton Two new groups Will provide important support for the UCSB production line

  4. Silicon tracker in Spring 2000 • Single sided, low resistivity silicon sensors as a baseline technology • extensively tested by RD20 – rad hard to >10 Mrad • Several vendor qualified (6” production lines) • Working front end chip – APV25, some issues to be resolved with multiplexer chip – MUX PLL • Hybrids – two technologies considered • Mechanics in excellent state – a lot inherited from MSGC’s • Plan to start production in fall 2001

  5. Outer Barrel Space Frame Spring 2000

  6. Outer Barrel Rods Spring 2000 Silicon modules

  7. Automated assembly 3 TOB modules/ 30 min Gantry at CERN Spring 2000

  8. SiTrkr Organization

  9. Schedule Issues Schedule slipped by ~ a year • Hybrid schedule is a concern • Decision on technology was made in September 2000  prototyping was semi-successful  might change the technology • FEDs • Initial models for testing of large quantities of FE hybrids and modules expected to be ready in late 2002 • Optical models for rod testing will be available 6/03 • Optical hybrids for assembly of modules into Rods will be available in late 2002 Other critical items are performing better • Gantries • PC based test stands • Probe stations • Sensors

  10. FE Hybrid status • Industrial hybrid (V0 – unpackaged chips on ceramics) production started with 1st Producer. 160 Hybrids delivered (yield 65%) They also say that “the feature size” of hybrid is too small for mass production. • The 2nd producer has still problems with shorts. • Design of the V1 version of the hybrid (packaged chips on ceramic- easier to produce) done. Send order to 1st producer. • 40 substrates hybrids V2 (packaged chips on FR4) received, some 10 populated. Hybrids and substrates distributed for mechanical and electrical tests. They look ok. Likely change in technology choice.

  11. HIP and pinhole effects on APV25 • Highly Ionizing Particles • produced in nuclear interactions, a rare phenomenon) • can saturate entire APV for ~200 ns • Results in inefficiency of ~1.3% • Pinholes • Leakage current directly into APV25 • Typically disconnected from readout • Signal inefficiency of >=2 connected pinholes/APV • Rate of new pinhole development <10/(few 100 wafers=1000 APV’s) • Fixes • Change resistor value on hybrid (100W 50W) • APV inverter off – reduces dynamic range PSI test beam planned at the end of May to further study the effect US to provide modules

  12. TOB Module 2 sensors bonded together  PA hybrid (4 APV25 chips) ~20 cm Build 6,000 TOB modules Current plan 2/3:1/3 at FNAL:UCSB

  13. CMS module production • Sensors probed at K-State • Automated module assembly system – Gantry - is fully commissioned at Fermilab • Placement accuracy <5um • 4 (+3) fully functional modules were delivered to CERN for test beam studies at PSI.

  14. Module Testing at FNAL ARCS CMS DAQ Two test systems are now in operation at SiDet

  15. From R&D to Production CMS Tracker R&D production

More Related