1 / 29

Chapter 1 The Adventure Begins

liam
Télécharger la présentation

Chapter 1 The Adventure Begins

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Chapter 1 The Adventure Begins Creating the first project and saying Hello to the world

    3. Preparation The following tools will be used in this lesson: MPLAB IDE, Integrated Development Environment (v8.00 or later, free) MPLAB SIM, free software simulator (included in MPLAB installation) MPLAB C32, C compiler (free Student Edition) The following pieces of documentation will be used during this lesson: PIC32MX Datasheet DS61143 (latest rev.) PIC32MX Family Reference Manual DS61120 Section 12. I/O Ports Make sure they are available and/or installed and ready to use on your computer. You can download them from Microchip web site at: http://www.microchip.com/mplab And http://www.microchip.com/c32

    4. The New Project Set Up Launch MPLAB IDE Follow the New Project Set Up Checklist to create a new project using the Project Wizard

    5. The New Project Setup Checklist Select the PIC32MX360F512L device and click Next. Select the PIC32 C-Compiler Tool Suite and click Next Click the Browse button and create a new folder. Name the new folder Hello, and inside it create the project file Hello World, then click Next. Click Next to proceed to the following dialog box since there is no need to copy any source files from any previous projects or directories. Click on Finish to complete the project set up

    6. The Project Window If not automatically visible, open the Project Window: Select View-> Project from the main menu

    7. The Output Window If not automatically visible, open the Output Window: Select View-> Output from the main menu

    8. The Editor Window Open a new editor window by selecting File->New, or CTRL+N keyboard shortcut, or by clicking on the corresponding button in MPLAB standard toolbar.

    9. Creating a Source File Type the following three lines: /* ** Hello Embedded World! */ Select File ->Save As Save the file as: Hello1.c. Now right click with your mouse on the editor window to bring up the editors context menu Select the Add To Project item. This will make the Hello1.c file the main source file in your project

    10. Saving the Project Select Project ->Save Project Save the project as Hello World.mcp

    11. The First Statement: #include Add a first C statement: #include <p32xxxx.h> Which will actually include a file called p32mx360f512l.h whose content looks like: ... extern volatile unsigned int WDTCON __attribute__((section("sfrs"))); typedef union { struct { unsigned WDTCLR:1; unsigned WDTWEN:1; unsigned SWDTPS0:1; unsigned SWDTPS1:1; unsigned SWDTPS2:1; unsigned SWDTPS3:1; unsigned SWDTPS4:1; unsigned :7; unsigned FRZ:1; unsigned ON:1; }; ...

    12. The main() function Add the following lines of code: main() { } There can be only one main() function The curly {} brakets When is it executed What happens after it is executed

    13. I/O PINS I/O pins can be configured as: Digital Inputs Digital Ouputs (Push Pull) Digital Outputs (Open Drain) Analog Inputs Dedicated inputs or outputs for a number of peripherals

    14. PORTA and PORTB Different PORTs group pins with different functions PORTB for example contains a number of pins that can be configured as analog inputs to the Analog to Digital Converter (ADC) . PORTA contains a number of pins that can be used for the JTAG interface, TRACE function, and the I2C interface Refer to the specific device datasheet for a detailed list of each PORT/pin capabilities

    15. TRIS registers TRIS registers control the direction of each pin (Input/Output) TRISA, TRISB each port has a corresponding tris register Setting a bit to 1 configures a pin as Input Clearing a bit to 0 configure the corresponding pin as an output

    16. The Watch Window

    17. Compiling and Linking A compiler transforms the C source code (.c) and all inlcuded (.h) files into a relocatable code object (.o) The linker takes all the relocatable code objects (.o) and libraries (.lib) and assembles them into an executable (.hex) file

    18. Using the Simulator Follow the SetUp Checklist Learn the basic debugging options offered by the Simulator Reset Single Step (Over/In) Animation Running Halting

    19. Debugging: Hello World #include <p32xxxx.h> main() { // configure all PORTB pins as output TRISB = 0; // all PORTB as output AD1PCFG = 0xffff; // all PORTB as digital PORTB = 0xff; }

    20. Analog Pin Functions Multiplexing The Analog Pins control: AD1PCFG

    21. Summary In this lesson we learned: How to create a new project How to create our first C source file How to build a project using the MPLAB C32 compiler About PINs and PORTs How to configure and control simple digital output pins How to configure and use the MPLAB SIM simulator

    22. Advanced Material

    23. The Disassembly Window If you want to see what happens at the machine instruction level: Open the disassembly window

    24. The Memory Gauge If you want to see how much memory RAM and FLASH is being used by the project Open the Memory Gauge Window

    25. Notes for the PIC MCU Experts The PIC32 PORTS are not necessarily 32-bit large. In fact most PORTS are 16-bit at the most. The PIC32 PORTS are designed to be compatible with the 8-bit and 16-bit PIC PORTS I/O PORT control in C is easy Use the LATx registers to control directly the output latches

    26. Tips and Tricks Interfacing to 5V input and output signals is possible with some caution: Digital Input pins are 5V tolerant Digital Output pins can be configured as Open Drain Use the ODCx registers to configure an output pin for Open Drain mode. Watch Out! Pins that are multiplexed with analog functions are NOT 5V tolerant!

    27. Suggested Excercises If you have the Explorer16 board and an in circuit debugger: Use the MPLAB REAL ICE Debugging or the MPLAB ICD2 Debugging checklists to help you prepare the project for debugging. Insert the instructions required to disable the JTAG port. Test the PortA example, connecting the Explorer16 board and checking the visual output on LED0-7. If you have the PIC32 Starter Kit: Use the PIC32 Starter Kit Debugging checklist to help you prepare the project for debugging. Modify the code to operate on PortD, but do NOT disable the JTAG port. Test the code by checking the visual output on LED0-2 on the PIC32 Starter Kit itself. In both cases you can: Test the PortB example by connecting a voltmeter (or DMM) to pin RB0, if you can identify it on your board, and watching the needle move, between 0 and 3.3V, as you single step through the code.

    28. Recommended Readings Kernighan, B. & Ritchie, D. The C Programming Language Prentice-Hall, Englewood Cliffs, NJ When you read or hear a programmer talk about the K&R they mean this book! Also known as the white book, the C language has evolved quite a bit since the first edition was published in 1978! The second edition (1988) includes the more recent ANSI C standard definitions of the language The MPLAB C32 compiler adheres to the ISO/IEC 9899:1990 (also known as C90) standard

    29. Online Resources http://en.wikibooks.org/wiki/C_Programming This is a Wiki-book on C programming and as such it is a bit of a work in progress. Its convenient if you dont mind doing all your reading online. Hint: look for the chapter called A taste of C to find the omnipresent Hello World! example.

More Related