Enhance Your Lift Mate with the Additional Limit Switch Sensor

1. Boost Your Lift Mate with the Additional If you own a Lift Mate — the smart controller for boat lifts, garage lifts, or cargo elevators — you can enhance its functionality with the optional Additional Limit Switch Sensor. What Is the Additional Limit Switch Sensor? The sensor is not a limit switch itself. It communicates with your Lift Mate to detect when your existing mechanical limit switches are triggered. Every Lift Mate comes with one sensor for the upper (storage) position, enabling the “down to service position” function. Adding the additional sensor lets you connect the lower limit switch, enabling the “up to service position” feature. This gives full awareness of both upper and lower limits, allowing automation in both directions.

2. Benefits of Adding the Sensor 1. Bi-directional Automation— Move the lift automatically to the service position, both up and down. 2. Improved Safety— Ensures the lift stops at mechanical limits, preventing over-travel and damage. 3. Greater Convenience— The lift behaves like a fully automated system, useful for boats, garages, or cargo lifts where precise positioning matters. 4. Cost-effective Upgrade— Small investment for automation, convenience, and safety improvements. Who Should Consider It? • Frequent lift users who move between service and storage positions • Those wanting hands-free automation • Lift owners aiming to reduce wear and protect equipment • Users needing precise stopping points for boats, vehicles, or cargo Installation & Setup 1.Wire the sensor to the lower limit switch input on Lift Mate 2.Enable and configure it in the Lift Mate app 3.Set the service position height for upward movement 4.Ensure all mechanical limit switches are properly installed Final Thoughts The Additional Limit Switch Sensor transforms a basic Lift Mate into a fully automated, safer, and more convenient system. For boat lifts, garages, and cargo elevators, this small upgrade makes a big difference.