SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

How to Increase Production and Decrease Costs with Artificial Lifts

liftingsolutions avatar
liftingsolutions
14 diapositives · 185 Views · Mar 22, 2018

Artificial lifts are designed with a purpose to reduce the over-cost of production. For this, several factors must be considered in mind like early planning on how to maximize production with the right type, design & right functionality of lift. For complete details on the factors, read the given presentation.

How to Increase Production and Decrease Costs with Artificial Lifts - slide 1
01 / 14How to Increase Production and Decrease Costs with Artificial Lifts
1 / 17

Télécharger la présentation

How to Increase Production and Decrease Costs with Artificial Lifts
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. How to Increase Production and Decrease Costs with Artificial Lifts

  2. Artificial lifts, systems and operations are designed to save money. They do this by increasing production and decreasing costs. However, there’s a science to ensuring your system achieves the proper results. This includes taking several factors into account, including how to maximise production in a mature field.

  3. And artificial lifts are one of the best ways to address production requirements. Below is an explanation of how this can be accomplished.

  4. Artificial Lift Systems and Types Whether a lift system optimises production, depends on the type of lift and system used. The lift chosen will depend on the field scale and on the well’s parameters. On the other hand, the lift system or method chosen will depend on production needs.

  5. Production needs are determined by assessing the current field productivity, drilling, completions and reservoir. There are two main lift systems: gas-assisted and pump-assisted. Additionally, there are eight artificial lift types. These types include:

  6. Rod pump • Progressive cavity pump (PCP) • Gas lift • Hydraulic piston pump

  7. Electrical submersible pump (ESP) • Linear lift system • Plunger lift • Pump-assisted plunger lift

  8. The Function of Lift Systems Lift systems have different designs, but they all perform the same types of jobs, including: downhole or surface volumes, accurately predicting production rates, choosing downhole equipment, accurately collecting well data and predicting total dynamic head (TDH).

  9. A system that performs all these jobs and more should deftly increase production while decreasing production costs. However, once again, choosing the right lift and system will depend on several factors or parameters. These parameters include:

  10. The type of fluid produced • Bottom hole pressure • Total well depth • The onshore or offshore surface location • Wellbore geometry • Amount of fluid production

  11. All the parameters must be known before a system is chosen. Unknown parameters can make the selection process difficult or impossible. This means some early, strategic planning before a lift system is even needed. When choosing a system, you must also keep mind that pumps perform differently.

  12. For example, plunger lifts are used in gas wells and use the well’s energy to pump small amounts of liquid. ESPs or centrifugal pumps are dynamic displacement pumps displace unfixed amounts of fluid. Positive displacement pumps (PDPs), like progressive cavity, hydraulic piston and carbon rod pumps hold a fixed amount of fluid in a cavity until itmoves in a certain direction (usually towards the surface).

  13. Keys to Optimising Production Strategic design and early planning are the keys to increasing production and decreasing costs. A design based on the characteristics of a well and a lift system’s operations will ensure the best lift and system are selected. Improper selection can cause excessive work oversleading to higher operational costs, decreased production caused by pump failure, tubing wear issues, and excessive pump maintenance.

  14. So, selecting and implementing the wrong lift design and system can cause the opposite of the desired effect. It can cause increased costs due to frequent pump maintenance and downtime for work oversand decreased production.