1 / 10

Selection of Material and Shape

Selection of Material and Shape. Case Studies. Floor Joists: Wood or Steel?. Aim: Light, stiff and strong joist for supporting floors in buildings Traditionally, wood with rectangular section of aspect ratio 2:1 is used; steel I-beam with 15  B e 25 could be used instead

lily
Télécharger la présentation

Selection of Material and Shape

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Selection of Material and Shape Case Studies

  2. Floor Joists: Wood or Steel? • Aim: Light, stiff and strong joist for supporting floors in buildings • Traditionally, wood with rectangular section of aspect ratio 2:1 is used; steel I-beam with 15Be25 could be used instead • Which one is better?

  3. Floor Joists: Wood or Steel?

  4. Floor Joists: Wood or Steel?

  5. Floor Joists: Wood or Steel? • While M1 are more or less the same, M3 of pine wood is much better than that of steel • The cellular structure is the nature’s answer to bending! But steel can be standardized.

  6. Forks for a Racing Bicycle • Aim: light strong frame • Loading on frame is not obvious, but that on the fork is predominantly bending. • First maximize f2/3/, regardless of shape

  7. Forks for a Racing Bicycle Six materials are singled out and shown in the next page All except wood can be made into tubes

  8. Forks for a Racing Bicycle

  9. Efficient Spring • Consider a leaf spring, the stored energy • The bending stiffness • The force F is limited by yielding • Substituting F and SB into the equation for U • For torsion bars or helical springs

More Related