1 / 3

Configuration of U232R FTDI USB Chip for Thermal Denuder with Omega Controllers

This document details the programming of the U232R FTDI USB chip for use in a thermal denuder system controlled by CN7500 Omega controllers. The CBUS0 function is set to TXDEN (transmit enable) and is programmed in the EEPROM for RS485 communication. The utility MProg.exe is utilized to program the EEPROM settings. Different CBUS pins can be configured for various controls, including fan control. Refer to the provided documentation for further details on pin options and programming specifics.

lis
Télécharger la présentation

Configuration of U232R FTDI USB Chip for Thermal Denuder with Omega Controllers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Nov 14, 2009. revisiting programming U232R FTDI USB chip for Thermal Denuder with CN7500 Omega controllers Blue trace is CBUS0 TXDEN Red is TX “T” character CBUS0 is programmed in EEPROM as TXDEN for RS485 use Use this utility to program EEPROM. D:\John\VS_FTDI_Example\MProg 3.5 Release\MPROG.exe

  2. See D:\John\VS_FTDI_Example\RS485_DS_FT232R_V204.pdf pg 27 TxDEN defaults on CBUS2 Seems I don’t need to use PWREN# (CBUS3) But I have reprogrammed CNUS0 to be TxDEN Use CBUS1, 2, 3 for GPIO, fan control, etc

  3. See D:\John\VS_FTDI_Example\RS485_DS_FT232R_V204.pdf pg 12 for CBUS pin options

More Related