1 / 24

Modeling and Analysis of PSRR in Analog PWM Class D Amplifiers

Tong Ge; Chang, J.S.; Wei Shu; Circuits and Systems, 2006. ISCAS 2006. Proceedings. 2006 IEEE International Symposium on 0-0 0 Page(s):4 pp. Digital Object Identifier 10.1109/ISCAS.2006.1692853 指導教授：易昶霈 學 生：杜彥諴 學 號： 98662006.

london
Télécharger la présentation

Modeling and Analysis of PSRR in Analog PWM Class D Amplifiers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tong Ge; Chang, J.S.; Wei Shu; Circuits and Systems, 2006. ISCAS 2006. Proceedings. 2006 IEEE International Symposium on0-0 0 Page(s):4 pp. Digital Object Identifier 10.1109/ISCAS.2006.1692853 指導教授：易昶霈 學 生：杜彥諴 學 號：98662006 Modeling and Analysis of PSRR in Analog PWM Class D Amplifiers

  2. NCUE-Graduate Insititute of Integrated Circuit Design OUTLINE • INTRODUCTION • MODELING OF PWM CDAS • INVESTIGATION INTO THE PARMETERS AFFECTING PSRR • RESULTS • CONCLUSIONS

  3. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • Power Efficiency • CDA modulation method • PSRR

  4. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION Power Efficiency note : CDA’s MOS operate in triode and cut-off regions that have low quiescent power.

  5. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • CDA modulation method • Pulse Width Modulation • Sigma-Delta Modulation • Bang-Bang Control Moudlation

  6. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • CDA modulation method • Pulse Width Modulation

  7. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • CDA modulation method • Sigma-Delta Modulation(Pulse-Density-Modulated-like)

  8. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • CDA modulation method • Bang-Bang Control Modulation (Pulse-Density-Modulated-like)

  9. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • CDA modulation method • Digital CDA modulation method

  10. NCUE-Graduate Insititute of Integrated Circuit Design INTRODUCTION • PSRR(Power Supply Rejection Ratio) 嚴格來說就是電源IC對輸入電壓所挾帶來的雜訊(Vin Ripple)清除的能力 • 電源斥拒比(PSRR)影響輸出訊號的因素除了電路本身之外還有電源級. PSRR 是一個用來描述輸出訊號受電源影響的量. PSRR 越大輸出訊號越不受電源影響. Critical parameter • Gain of integrator • Gain of PWM • Gain of feedback factor

  11. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling an open-loop PWM CDA • Modeling a close-loop PWM CDA

  12. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling an open-loop PWM CDA

  13. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling an open-loop PWM CDA Gpwm = gain of PWM stage N = noise in supply rail

  14. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling a close-loop PWM CDA 積分器 Feedback network(R1 and Rfb)

  15. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling a close-loop PWM CDA

  16. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling a close-loop PWM CDA G1=amp input to inverting input of integrator H1= feedback factor Aop = op-amp open –loop gain

  17. NCUE-Graduate Insititute of Integrated Circuit Design MODELING OF PWM CDAs • Modeling a close-loop PWM CDA

  18. NCUE-Graduate Insititute of Integrated Circuit Design INVESTIGATION INTO THE PARMETERS AFFECTING PSRR • The gain of integrator • The gain of PWM stage • The feedback factor

  19. NCUE-Graduate Insititute of Integrated Circuit Design INVESTIGATION INTO THE PARMETERS AFFECTING PSRR • The gain of integrator Eq10中Gint可以大幅的增加PSRR,所以Aop越大越好.會在fig6再一次看到

  20. NCUE-Graduate Insititute of Integrated Circuit Design INVESTIGATION INTO THE PARMETERS AFFECTING PSRR • The gain of PWM stage

  21. NCUE-Graduate Insititute of Integrated Circuit Design INVESTIGATION INTO THE PARMETERS AFFECTING PSRR • The feedback factor Increasing H1 results in twomajor shortcomings • reduced dynamic range of the amplifier • reduced amplifier gain

  22. NCUE-Graduate Insititute of Integrated Circuit Design RESULTS

  23. NCUE-Graduate Insititute of Integrated Circuit Design CONCLUSIONS 這篇PAPER表現了,一個分析CDA中PSRR的方法 探討了影響PSRR的三個因素

  24. NCUE-Graduate Insititute of Integrated Circuit Design Thanks for pay attention.

More Related