1 / 56

A Presentation on

A Presentation on. Dr.S. Kanmani Phone:044 – 22359027 Professor in Civil Engineering skanmani@hotmail.com Centre for Environmental Studies Anna University Chennai, Chennai – 600 025. Reverse Osmosis. TDS. TDS Ranges. TDS Concentrations. History of Membrane Treatment.

lovie
Télécharger la présentation

A Presentation on

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Presentation on Dr.S. KanmaniPhone:044 – 22359027 Professor in Civil Engineering skanmani@hotmail.com Centre for Environmental Studies Anna University Chennai, Chennai – 600 025

  2. Reverse Osmosis

  3. TDS

  4. TDS Ranges

  5. TDS Concentrations

  6. History of Membrane Treatment • 1748, Osmosis • 1948, Reverse Osmosis (RO) • Membrane classification MF, UF, NF & RO.

  7. RO Removes Ionic Non ionic Particulate Microbiological

  8. Osmosis Reverse Osmosis

  9. OSMOSIS & its REVERSE Po= P -- Po<P -- -- Po>P --

  10. Reverse Osmosis Water Flow Product Feed Concentrate Ions

  11. TYPES OF MEMBRANES • Cellulose acetate • Polyamide hydrocarbon (PAH) • Sulfonated polysulfone (SPS) • Hollow fibre • Spiral bound • Tubular • RO membranes degraded by chlorine. • SPS membranes are resistant to Cl2 attack. • Chlorine-resistant membranes would eliminate the • need for de-chlorination of the RO feed and re- • chlorination of permeate. • Reducing the overall cost of RO.

  12. MEMBRANES They are made of different materials - Cellulose acetate/triacetate - Cellulose acetate blends - Poly amides - Ceramics etc They are in different forms - Hollow fibre - Thin film composite spiral wound They have different characteristics -capabilities to remove impurities and operating pressures

  13. Hollow fibre Configuration

  14. Hollow-fiber membranes

  15. RO ELEMENT

  16. RO ELEMENT

  17. RO ELEMENT

  18. RO Membrane Sizes Recent Advancement:Extra large RO Membranes: 18 in dia x 60 in long

  19. Reverse Osmosis:What It Cannot Do Cannot concentrate to 100% Cannot separate to 100% Not always the most cost effective method

  20. Typical Operating PressuresPressure Driven Membrane Processes 1 bar = 1 atm = 100 kPa = 100 kN/m2 = 1 kg/m.s2 = 10 m H2O = 760 mm Hg=14.5 psi

  21. Rule of Thumb 100 mg/L TDS » 1 psi (0.07 atm) osmotic pressure 1,000 mg/L TDS » 10 psi (0.7 atm) osmotic pressure 35,000 mg/L TDS » 350 psi (25 atm)osmotic pressure

  22. SINGLE MODULE RO Module : Pressure vessel containing 1 -10 RO elements

  23. MODULES IN SINGLE ARRAY M-1 Pre- Treatment M-2 Permeate P M-3 Reject

  24. MODULES IN MULTIPLE ARRAY M-1 Permeate Pre- Treatment M-3 P M-2 Reject

  25. MODULES IN MULTIPLE STAGE M-1 Permeate Pre- Treatment M-2 P Reject

  26. Membrane Operational Terminology • Influent/Feed Water • Effluent/Permeate • Concentrate/Retentate/Reject • Flux – Volume of water that passes through a membrane per unit of time & per unit of surface area of the membrane (L/h/m2) • Recovery-%of feed that is converted to permeate • Contaminant removal – % of a contaminant removed from the feed stream.

  27. Membrane Operational Terminology (Contd.) • 7.Size exclusion – Removal of PM by sieving • 8. Molecular Weight Cutoff (MWCO), measured in Daltons – A Dalton is a non-SI unit of mass equal to 1/2th of mass of a carbon – 12 atom. • Membrane Fouling : Reduction of flux through a membrane caused by the build-up of contaminants (Macro (i.e surface) & Micro (pore) fouling, Reversible/Irreversible Fouling). • Transmembrane Pressure – (Average feed pr. - Permeate pr.)

  28. Membrane Classifications

  29. Terminology • Membrane Module : A complete unit consisting of membranes, support frame & ports (feed inlet, reject, outlet permeate) • Array/Train : Assembly of catridges in pressurised systems • Catridge: A manufactured canister of membranes with feed, permeate & reject connections. • Module: A collection of membranes intended to be mounted & replaced as a unit.

  30. Membrane Materials & Configurations • Physical structure of membrane – Microporous or Asymmetric • Pore size – uniform (isotropic), Varied (anisotropic) • Membrane materials – Organic (cellulose- based) & Inorganic (metals/ceramics) • Types of membranes – Flat sheet, Hollow fibres, Tubes, spiral-wound cylinders & Rotating flat plates

  31. NF & RO for Advanced Treatment • Fouling potential may be estimated based on SDI (<5), turbidity (<NTU). • Pretreatments steps for RO include • MF/UF • SMBS addition • Chloramination • H2SO4addition • Scale inhibitor chemical addition • Catridge filtration.

  32. Design Criteria

  33. RO Feed Water Quality

  34. PRE-TREATMENT Pretreatment; TDS < 10,000 No microorganisms No oil Turbidity < 1 NTU Particle size < 25 micron pH = 4.5 prevents scale formation

  35. PRE-TREATMENT • Screening of solids: prevent fouling of the membranes by fine particle or biological growth, and damage to pump. • Cartridge filtration : polypropylene filters to remove 1 - 5 µm particles. • Biocidal Treatment: biocides such as chlorine to kill bacteria. • De-chlorination: bisulfite dosing to remove the chlorine which can oxidize membrane.

  36. Factors Which Affect Performance of Membranes Feedwater Pressure Feedwater Temperature Feedwater Concentration Increased Recovery

  37. Fouling • Biological or colloidal fouling • Sulphate salts (CaSO4) • Silica fouling can be more difficult to predicted & control than other types of fouling. • Soluble silica is concentrated to insoluble levels in RO process • Effluent organics can adsorb onto membrane element surface, causing pore clogging & even a change in membrane surface charge.

  38. THANK YOU Dr.S. Kanmani, B.E., M.E.,Ph.D. Professor in Environmental Engineering Centre For Environmental Studies, Anna University Phone: 044-22359027 email : skanmani@hotmail.com

  39. Membrane Technology • Desalination Technologies (Membrane Processes / Distillation Technologies / Chemical Processes (IX)). • Most common desalination technology – Membrane Processes • A membrane is a thin porous material that allows water molecules to pass through it, but rejects viruses, bacteria, metals, salts , etc. • Wide variety of polymeric materials : Cellulose, Acetate, Nylon. • Non – polymeric materials: Ceramics, Metals, Composites.

  40. Two types of Membrane processes: • Pressure Driven (RO, NF, UF, MF) • Electrical – Driven (Electrodialysis)

  41. Application of Pressure – Driven Membrane Processes

  42. Application of Membrane Processes

  43. Reverse Osmosis • A physical process. • Osmotic pressure difference bt. Salt water & pure water is used. • A pressure greater than osmotic pressure is applied on feed water. • A con. Salt soln is rejected. • TDS upto 45,000 mg/L could be treated. • Pump is used to raise the pressure applied to sea water.

  44. For brackish water, pump pressure ( 140 – 400 psi) • For sea water , pump pressure ( upto 1200 psi) • Two common Membrane Types (Cellulose Acetake, CA & Non – CA Membranes) • CA membranes are used in desalination process. They have smooth surface that is resistant to fouling. • Non – CA members, Thin – film Composite Membranes ( eg. Polyamide & Composite Membranes) use Organic materials (eg Polysulphone)

  45. They have high Flux – Rate (Volume of fresh water per membrane surface area). • Non – CA membranes are stable over wide pH range than CA membranes, but susceptible to Cl2. • In order to meet RO feed water quality requirements , pretreatment is needed (for removal of large particles, Organics & adding Chemicals to prevent Formation of precipitates & scales). • CO2 & soda ash are added to increase alkalinity of treated water. • Recovery is the vol. of fresh water produced as a % of vol. feed water processed. • Typical recovery rates (30 – 80 %)

  46. General Membrane Operation & Maintenance Procedures • Back washing of the membrane is a common technique used with low-pressure, hollow-fiber membranes to maintain the design operating flux of the system. • Standard solutions of acids, bases & detergents are used to clean most membrane. • Cl2 in the form of sodium hypochlorite is used to remove biological foulants. • Critic acid (C6H8O7) is a common acid used to clean membrane is effective in removing iron scales & mineral scales (CaCO3, CaSO4, MgSO4) resulting from hard water • Caustic could be used to remove biological fouling when Cl2 cannot be applied • Other chemicals used to clean low-pressure membranes include H2O2, HCl & EDTA.

  47. Membrane Post Treatment System • Degasification to remove H2S, CO2 from permeate. • NaOH is used to increase pH.

  48. Scale Prevention • To prevent formation of CaCO3, pH of RO feed water is lowered by adding mineral acid. • Solubility of CaCO3 salt depends on pH & bicarbonate ion, thus converting bicarbonate ion to CO2 & lowering pH will increase its solubility. • Mineral acid can be used to control biofouling (i.e HCl, H2SO4) • Antiscalants are required when con. of salt exceeds its solubility. • Polymeric scale inhibitors (polyacrylates or poly acrylic acid) have been developed.

More Related