1 / 6

Flexural stiffness design using Miki’s diagram

Flexural stiffness design using Miki’s diagram. Flexural lamination parameters Boundaries of the domain What laminates have the same position on the Miki in-plane diagram as on the Miki flexural diagram?. Examples. (0/90) s : , h=4t ,. Stiffest laminate under lateral loads.

lucian
Télécharger la présentation

Flexural stiffness design using Miki’s diagram

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Flexural stiffness design using Miki’s diagram • Flexural lamination parameters • Boundaries of the domain • What laminates have the same position on the Miki in-plane diagram as on the Miki flexural diagram?

  2. Examples • (0/90)s : ,h=4t • ,

  3. Stiffest laminate under lateral loads • Recall displacement under sine load • To find stiffest laminate we need to maximize S= • From Table 2.1 • This implies that S is a linear function of the lamination parameters, and the stiffest laminate is an angle ply. Why?

  4. Example 8.2.1a • Design a 16-layer 20x15” laminated graphite epoxy plate to maximize its fundamental frequency. Material properties are: • Tsai-Pagano material properties (in Msi) are

  5. Normalized fundamental frequency • Normalized frequency • For our data • For maximum frequency we want negative and negative , so angles near 60-deg. • Why?

  6. Maximization of frequency • Iso-frequency contours on Diagram. • Maximum where iso-frequency line is tangent to diagram • Get • Text suggests • Can we do better? Should be omega21 in figure

More Related