420 likes | 644 Vues
HOW TO CREATE AN AUTOMATION SYSTEM. I NTERFACES. ACCESSORYES. How is composed the My home automation system. COMMANDS. ACTUATORS. LOADS. How is composed the My home automation system. LOADS. Lamps. Halogen. Incandescent. Fluorescent. LED. Discharge. LOADS. Motors. ON/OFF.
E N D
I NTERFACES ACCESSORYES How is composed the My home automation system COMMANDS ACTUATORS LOADS
How is composed the My home automation system
LOADS Lamps Halogen Incandescent Fluorescent LED Discharge
LOADS Motors ON/OFF UP/DOWN RIGHT/LEFT
CENTRALIZED INSTALLATION PERIFERICAL INSTALLATION
ACTUATORS CENTRALIZED INSTALLATION
ACTUATORS PERIFERICAL INSTALLATION
1 Study the project and locate the loads 2 Select the actuators 3 Configure the actuators 4 Select the commands 5 Configure the commands How to organize a My Home automation system 5 RULES
1 Study the project and locate the loads
2 Select the actuators CENTRALIZED INSTALLATION PERIFERICAL INSTALLATION RADIO? DIMMER RELAY
If do you use DIMMER is better! SOFT START
If do you use DIMMER, consider the extra space in the cabinet
PL A 3 Configure the actuators TO CONFIGURE = TO GIVE A NAME STANDARDCONFIGURATION
Use SLAVE Can not exist 2 actuators with same address ROMEO and ROMEO
3 Configure the actuators VIRTUAL CONFIGURATION
AREA 6 AREA 7 AREA 5 AREA 5 AREA 1 AREA 2 AREA 4 AREA 3 AREA 8 You can share the same AREA in 2 rooms You can use 2 AREAS for one room
4 Select the commands LIGHT EVER WITH RADIO?
Software Configure the Scenarios 1: using the commands EXISING VIRTUAL 2: pushing the blue buttons 3: using the software
5 Configure the commands
GR1 GR1 GR1 G E N E R A L AREA 3 AREA 5 AREA 4 AREA 1 AREA 2 GR2 GR2 Point to Point: shutter, light Area command 31 32 Room 3 12 11 21 51 33 15 24 53 34 52 23 14 Room 5 Room 1 Room 2 13 22 42 Room 4 41 Group command General command
3 To configure the commands VIRTUAL CONFIGURATION
System limits DISTANCE PHYSICAL LIMIT ABSORPTION LOGICAL LIMIT ADDRESS
PHYSICAL LIMIT 250m MAX 500m MAX Power supply Actuator Command
PHYSICAL LIMIT 1200 mA available from the power supply Table of absorption
PL A LOGICAL LIMIT 9 Areas 9 PL 9 x 9 = 81 address 9 groups
How to expand the basic limit With an interface we link together two or more systems
How to expand the basic limit 81 address INTERFACE In PHISICAL EXTENSION MOD 500m+500m & 1200mA+1200mA
MAX 4 INTERFACES 1500m & 3600mA 81 address INTERFACE In PHISICAL EXTENSION MOD
How to expand the basic limit 80+80 address INTERFACE In LOGICAL EXTENSION MOD 500m+500m & 1200mA+1200mA
LOGICAL EXTENSION MAX 9 INTERFACES 80 address 80 address 80 address 80 address 500m+500m+500 & 1200mA+1200mA+1200mA
Physical and logical extension mixed PHISICAL EXTENSION LOGICAL EXTENSION PHISICAL EXTENSION LOGICAL EXTENSION LOGICAL EXTENSION
Expanded limits 500m 2.500m PHYSICAL LIMIT LOGICAL LIMIT 81 address 810 address
System limits RADIO?
Expanded limits If the addresses are more than 810? If the distance is long than 2,5Km? WEB SERVER
IP 10.23.45.183 L A N IP 10.23.45.181 IP 10.23.45.186 IP 10.23.45.182
EXERCISE PRACTICE