1 / 9

LATHE SAFETY

LATHE SAFETY. SPECIFIC PURPOSE. To shape a work piece by turning it against an edged tool. SPECIFIC SAFETY RULES. Make sure wood is free of checks, knots & defects. Glued up work MUST cure for 24 hrs before being turned. Uncured glue lines may fail & fly apart.

lynn
Télécharger la présentation

LATHE SAFETY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LATHE SAFETY

  2. SPECIFIC PURPOSE • To shape a work piece by turning it against an edged tool

  3. SPECIFIC SAFETY RULES • Make sure wood is free of checks, knots & defects. • Glued up work MUST cure for 24 hrs before being turned. Uncured glue lines may fail & fly apart. • Lock tailstock & check for left or right movement before starting the lathe.

  4. Safety Rules Con’t • Move tool rest as close as possible to the stock & lock in place. Too much space will cause the tool to pull from your hands. • Start rough turning operations at slowest speed. Increase speed for finish turning. • Hold tools firmly with both hands.

  5. TURNING TOOLS

  6. TURNING TOOLS

  7. TURNING TIPS • CUTTING the tool digs into the revolving stock to peel away small shavings • SCRAPING the tool is held at right angles to the stock to wear away fin particles of wood • CENTERING draw two diagonal lines across opposing corners on the end of the stock

  8. TURNING TIPS • ROUGH TURNING the initial rounding of the stock • FINISHING TURNING the final shaping of the stock

  9. DIAGRAM FACEPLATE HEADSTOCK TAILSTOCK SPINDLE TAILSTOCK TOOL REST TAILSTOCK LOCK TOOL REST LOCK

More Related