1 / 7

Lathe axis

Lathe axis. Turning Machine Axes. Work piece coordinate setting. Work piece location setting is easier on turning machine than on milling center .

oliver
Télécharger la présentation

Lathe axis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lathe axis

  2. Turning Machine Axes

  3. Work piece coordinate setting • Work piece location setting is easier on turning machine than on milling center. • The spindle or work piece center is the location of the X0 position, and the Z0 position is typically the right end of the work piece or the chuck face.

  4. Calculate the number of face cut (rgh & fin) for the Sketch

  5. CNC Lathe are programmed in diameter

More Related